News for hackers. Stuff that matters.
Re:The IPv6 Transition by m348e912 on Sunday October 20, 2024 @08:56PM (#41899787)
>The ISP should give every SOHO/residential customer a /60.

The ISP should give every residence 295 quintillion IPv6 addresses? I know there is an abundance of ipv6 addresses but that seems like a lot of waste.

Even assigning a /96 would provide 4.3 billion ipv6 addresses (which is the same number as all ipv4 addresses in existence)

And since available ipv6 space is basically 4.3 Billion^2, assigning an ipv6 /96 would be like assigning a /32 in ipv4 terms of total ipv6 space utilization.

Re:The IPv6 Transition by mbirth on Sunday October 20, 2024 @09:08PM (#41899841)
/64 is needed for SLAAC to work and is basically the default.

Anything larger (usually /56, sometimes even /48) gives the customers a chance to segment their LAN.

Re:The IPv6 Transition by Dylan16807 on Sunday October 20, 2024 @10:59PM (#41900301)
That's not how you're supposed to use IPv6. It would just be 64 bits if that was the case. Instead, 99% of the time, it's a 64 bit subnet ID and a 64 bit device ID.
Re:The IPv6 Transition by unethical_ban on Sunday October 20, 2024 @09:25PM (#41899916)
Like other person said, /64 is the minimum subnet size. And submitting in ipv6 is best done 4 bits at a time. A /60 is overkill for residents, but because it gives 16 subnets, not because it gives excessive addresses.
Re:The IPv6 Transition by megous on Monday October 21, 2024 @03:51AM (#41901712)
There's no minimum subnet size.
Re:The IPv6 Transition by immibis on Monday October 21, 2024 @04:05AM (#41901776)
/64 acts as a soft limit due to the prevalence of SLAAC. Which is good in a way, since it means ISPs have to give out at least /64, which means you're always able to subnet (although you can't use SLAAC and must use static addresses or DHCP) unlike IPv4 where you have to pay for extra addresses.
Re:The IPv6 Transition by GoblinSlayer on Monday October 21, 2024 @08:18AM (#41903342)
The purpose of SLAAC intends to have many customers in one /64 network though.
Re:The IPv6 Transition by icedchai on Monday October 21, 2024 @09:12AM (#41903809)
The purpose of SLAAC is to make it "easy" for a client to get onto the network without something like a DHCP server tracking addresses. If you set it up, it generally just works.
Re:The IPv6 Transition by GoblinSlayer on Monday October 21, 2024 @09:49AM (#41904135)
Previously it worked by putting the MAC address in the last 64 bits.
Re:The IPv6 Transition by icedchai on Monday October 21, 2024 @09:57AM (#41904210)
Yes, that was before privacy extensions. It hasn't been like that (in most implementations) for a very long time.
Re:The IPv6 Transition by GoblinSlayer on Monday October 21, 2024 @10:05AM (#41904305)
And you get no privacy if /64 prefix is a stable identifier of one customer.
Re:The IPv6 Transition by icedchai on Monday October 21, 2024 @10:10AM (#41904358)
This doesn't seem like an IPv6-specific issue. For most broadband customers, your external IPv4 address is also generally stable. Mine hasn't changed in years.
Re:The IPv6 Transition by immibis on Monday October 21, 2024 @09:01AM (#41903709)
No, just many devices.

You can DoS your whole subnet by pretending to be a billion devices. In IPv4 you can do it by occupying all the IP addresses. Therefore putting several customers on one network is a bad idea, just like in IPv4.

Re:The IPv6 Transition by megous on Monday October 21, 2024 @09:11AM (#41903798)
Yes, you can't use SLAAC feature, but there's no subnetting limit in IPv6. Any subnet size works.

Writing to you from /72.

Re:The IPv6 Transition by unethical_ban on Monday October 21, 2024 @09:30AM (#41903971)
You're technically correct, but ISPs best practice is to hand out a /64.