News for hackers. Stuff that matters.
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by virtue3 on Wednesday October 02, 2024 @04:28PM (#41724693)
I've been using this for years since uTorrent went to shit. I can't recommend it enough.
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by vivzkestrel on Thursday October 03, 2024 @12:30AM (#41727395)
out of the loop here, what happened to utorrent?
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by alganet on Thursday October 03, 2024 @01:19AM (#41727569)
Monetization happened to utorrent.
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by MaxikCZ on Wednesday October 02, 2024 @04:46PM (#41724820)
Probably best there is, altho I have a nitpick: they dont allow remembering my choice to "Download first and last pieces first" and "Download in sequential order". Even after raising a PR request Ive been told that allowing users to select that would be harmful for torrent health. Jeez, dont assume you know my usecase, I can guarantee that even if 50% of users had this enabled, torrents would be just fine. They could even hide the option to remember these two settings somewhere deep, but no... if I want it, I am supposed to build from source. ..
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by mystified5016 on Wednesday October 02, 2024 @06:33PM (#41725552)
Have you ever considered that you may be wrong and this would actually be a bad feature?

But I'm sure you know more about the technical details of torrenting than the QBittorrent developers.

Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by 01HNNWZ0MV43FF on Wednesday October 02, 2024 @09:02PM (#41726367)
Even if I always seed 5x?
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by Managor on Wednesday October 02, 2024 @05:48PM (#41725276)
Also contains a headless server named qbittorrent-nox. I use it in my server.
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by freedomben on Wednesday October 02, 2024 @06:44PM (#41725628)
Transmission is also great for this. You can run it completely headless, or you can run the GUI locally and connect via web interface remotely. It's very flexible and has been great to work with.
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by IntelMiner on Wednesday October 02, 2024 @07:01PM (#41725709)
Deluge was my go-to for this for years and years and years. More diversity in this ecosystem is good to see
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by indrora on Wednesday October 02, 2024 @07:31PM (#41725908)
I'm a fan of aria2c [1] in server mode paired with a lightweight WebUI [2].

Works really well on a small machine. Start aria2 as a service in systemd tied to a user with some basic isolation (or put it in a Docker container!)

[1] https://github.com/aria2/aria2 [2] https://github.com/mayswind/AriaNg

Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by Cyph0n on Wednesday October 02, 2024 @08:28PM (#41726193)
qbittorrent + gluetun works like magic (if you’re running containers).

https://github.com/qdm12/gluetun

Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by high_priest on Wednesday October 02, 2024 @05:52PM (#41725311)
How is this better from indestructible Deluge?
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by mystified5016 on Wednesday October 02, 2024 @06:31PM (#41725536)
Personally I've always found deluge to be slow, buggy, and prone to crashing. It also is much more simplistic. It's been a long time since I've used it so I can't remember offhand what features it's missing. I just remember it not being a power-user application.

It's fine, I guess. QBittorrent is just much more powerful and stable.

Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by mrinfinitiesx on Wednesday October 02, 2024 @07:08PM (#41725748)
When using a VPN, will leak your IP address. Use https://ipleak.net/ to check. It'll show your VPN IP address, home ip address, and your IP address will leak your client information. Even if you bind it to the right bindings in the settings it'll still randomly do this.

When I saw that in the ipleak after seeding something to my private server I was in awe; that good software like this would allow something like that.

Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by ndriscoll on Wednesday October 02, 2024 @07:45PM (#41725982)
Assuming this is true, one way you could mitigate is to place it into a network namespace where the only available interface is the one you want your program to use. e.g. https://www.wireguard.com/netns/#ordinary-containerization

Note that this can still leak traffic like DNS requests via domain sockets that connect to a handler outside the namespace. The New Namespace Solution on that page should prevent that I think if you want to route all traffic through the vpn by default.

Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by yupyupyups on Wednesday October 02, 2024 @07:48PM (#41725996)
I think this can be fixed by first understanding that a VPN is a proper network.

You do not have to rely on the qbittorrent client to do any proxying. Turn that setting off.

A wireguard VPN is literally a network that you can route traffic through. If you can somehow force qbittorrent to route all its traffic through a wireguard interface and not your wifi/eth interface, you wont need the proxy settings as your IP will be hidden by virtue of you using the wireguard network rather than your home network.

Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by move-on-by on Wednesday October 02, 2024 @09:12PM (#41726411)
This is concerning claim, but I checked it all out and have verified my IP is not being leaked (that is a neat site BTW, thanks for sharing).

I will say, I don’t have a ‘standard’ setup with qBittorrent and a VPN provider, so I’ll share some details in hopes that it will be useful to someone.

I use qBittorrent in headless mode with the web interface- so it’s running on a little server within docker. The docker compose has two services, one WireGuard (lscr.io/linuxserver/wireguard) the other qBittorrent (lscr.io/linuxserver/qbittorrent). The qBittorrent service has ‘network_mode: service:WireGuard’ so that it uses the WireGuard network. I’ve got WireGuard all setup with my VPN provider.

While all that should theoretically be all you need, I also configure qBittorrent to use my VPN’s SOCKS5 proxy. This acts as a great safeguard, if the VPN isn’t functioning, then the proxy auth will fail and will act as a kill switch to qbittorrent. Be sure to configure qBittorrent to use the proxy for everything (I can’t remember if this is default or not).

Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by shiroiushi on Thursday October 03, 2024 @01:53AM (#41727707)
You shouldn't need any kind of "kill switch" for qBittorrent: normally when you set up a VPN (I use OpenVPN for reference), on Linux you get a new network device, usually called "tun0". In qBittorrent, you can specify the network device to use, rather than just letting it automatically select one. So set this to "tun0", and it'll only pass traffic over this virtual device; if something goes wrong with the VPN, qBittorrent will just be sending packets into the void.
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by 3np on Thursday October 03, 2024 @12:14AM (#41727333)
[delayed]
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by seymon on Thursday October 03, 2024 @02:02AM (#41727737)
There is the open source software project gluetun, that allows setting up a containers that are only able to communicate through a vpn network interface in an easy way.

https://github.com/qdm12/gluetun

With this it is not much effort to set up qbittorrent in a privacy secure way.

Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by 3np on Thursday October 03, 2024 @02:31AM (#41727863)
gluetun can be great for many other use-cases, but what I said still stands regarding udp p2p like bittorrent. You are very likely to get surprises like GP unless you are very lucky or really know what you are doing wrt the actual networking configuration.
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by harshreality on Thursday October 03, 2024 @04:50AM (#41728670)
If the VPN container does things correctly and kills the default non-vpn route, how would those surprises occur? To be clear, I hope 3np is talking about containers like the following, and not trying to proxy only udp or only tcp piecemeal.

    services:
      vpncontainer:
        image: <whatever>
        container_name: vpncontainer
        cap_add: [NET_ADMIN]

      vpn-qbittorrent:
        image: lscr.io/linuxserver/qbittorrent:latest
        container_name: vpn-qbittorrent
        network_mode: service:vpncontainer

      # and optionally, for other purposes, not qbittorrent above
      vpn-socks:
        image: serjs/go-socks5-proxy
        container_name: vpn-socks
        network_mode: service:vpncontainer

      # environments, volumes, ports, systctls, port-fwd helpers omitted
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by 3np on Thursday October 03, 2024 @05:20AM (#41728854)
I'm saying that the underlying container networking (Docker or whatever backend you use for podman) might not behave like you/the software are expecting with these in context more esoteric protocols.

If you verify that it behaves like you intend (dump network traffic and make sure packets go where they should over some reasonable timespan and across restarts) and ideally are prepared to file issue for any bug you come across (clears throat) definitely don't let me dissuade you from trying, though. It _should_ work.

Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by bdjsiqoocwk on Thursday October 03, 2024 @02:46AM (#41727916)
OT Does anyone know if the torrent technology itself allow incremental stuff? For example, if a torrent contains the first N episodes of a series and the N+1 episode comes out, is it possible to create for the new episode which references the previous torrent so that a client doesnt have to download any previous episode?
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by defrost on Thursday October 03, 2024 @02:55AM (#41727954)
BEP46 aka Dynamic Content Updates and Decentralization is, if I recall correctly, rolled into BEP-52 , aka The BitTorrent Protocol Specification v2 which has been the standard since 2020 (or so) and on paper since 2017 (ish).

( again, IIRC )

Question is, of course, how many release groups, public and private trackers are supporting this feature?

https://medium.com/@kyodo-tech/bittorrent-protocol-v2-and-dy...

https://www.bittorrent.org/beps/bep_0046.html

https://www.bittorrent.org/beps/bep_0052.html

https://blog.libtorrent.org/2020/09/bittorrent-v2/

Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by bdjsiqoocwk on Thursday October 03, 2024 @04:14AM (#41728420)
Ooo cool

Right, like in all decentralized systems, ensuring that all parts are working together is a challenge. Thanks for this.

Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by bdjsiqoocwk on Thursday October 03, 2024 @10:26AM (#41731110)
Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by defrost on Thursday October 03, 2024 @09:19PM (#41736863)
qbittorrent, transmission, other recent libraries support the protocol; what I've yet to see at any scale is community support in tracking communities.

For example (say) a 2024 Season release torrent of Free-To-Air Australian Media Watch that updates each week with additional (weekly) episodes and corrected subtitles as they're improved

(typically three waves of subtitles- "Live to air" real time lagging subtitles with errors; then corrected and tightened subtitles, and lastly 'perfect' subs with precise syncing and no [undeciphered mumble])

The tooling is there, the community support and uptake is still lagging.

Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by its-summertime on Thursday October 03, 2024 @05:56AM (#41729060)
Torrents can have the same files in the same spots, in which case, the client can match up 99% of a given file (1% needing to be redownloaded due to pieces that go across file boundaries).

Alternatively, it can just have the old torrent file in the new torrent: Many clients support recursive downloading, it will then recognize that it already has the old torrent, and won't re-download.

Re:QBittorrent: Open-Source, Lightweight BitTorrent Client w... by thisislife2 on Thursday October 03, 2024 @07:30AM (#41729615)
Forced to use an old version because the newer versions are really buggy on macOS. (They acknowledge it too, and say they lack mac developers).