To give a more useful metric, for the last 4 years I have maintained a company have about 150 machines. 50% are Macbook Pros. 50% are Lenovos. I saw, on average, 5-6 Lenovos have some sort of hardware failure per year. The Macbook Pros would see 1-2 hardware failures per year. The Macbook Pros were also giving about 6-12 months of extra life before needing to be replaced. The external packaging of the Lenovos would produce MUCH more wear year over year than the aluminum Macbook Pro.
Lucky you :)
I am a qualified EE so will not comment on the initial article as it makes me squirm a bit.
I'm not, though I did take a lot of EE classes in college, and I think the article is fine. He took the thing apart and noted which components Apple used. He's not telling anyone how to engineer their own power supply.
It's interesting to note that most cheap replacement chargers don't have significant safety issues but produce harmful EMI, on the other hand it's not too hard to find name brand power supply which have significant safety issues (eg. low impedance connection between otherwise unconnected ground of EMI filter on primary side and output ground), often caused by combination of safety, EMC and design/size requirements and weird interactions between them and between requirements of different jurisdictions (EMC, ESD and safety requirements of EU sometimes tend to be contradictory).
Bear in mind my Airport express melted and blew my circuit breakers so shorts are definitely a possibility.
I've seen literally thousands of Apple USB cables in my work, and, while they probably won't hold up against heavy abuse as well as a rubbery booted end, they tend to either be totally fine or fraying at the ends.
The funny thing is that people with fraying ends tend to have all their cables fraying, whereas those with undamaged cables tend to have all undamaged cables.
There's something about use case here where Apple's cables just don't hold up to common (mis?)use case by a subset of their users.
A $5 set of Sony earphones goes through several orders of magnitude more shearing, twisting and pulling and last years. Why can't apple do that?
Because it looks pretty before it has sound engineering.
Apple doesn't do it for everything for mainly aesthetic and packaging reasons - iOS 30 pin cables are much smaller than they used to be before the iPhone came out, to fit in even smaller packaging.
I'm sure there would be complaints about the "big, ugly cable" if Apple beefed up their cables ends, especially if the only benefit would be to the 20-30% of the population that is hard on their gear, and even in that case the enhanced durability would only increase the cable's lifespan slightly.
In the EU we have quite hefty electrical safety laws and I doubt it could be CE marked or approved in the UK at least based on the line voltage isolation.
(Also an EE by education if not by trade, though that doesn't really count here)
Here's what has died on me just outside a year since 2006 MacBook pro (logic board failure), iMac (won't boot), a MacBook (won't charge), just about every damn usb cable they've ever given me (broken at type a connector), airport express (melted). A friend of mine's MacBook pro caught fire. I won't even bother to catalogue the 22 dead iPhones my company has...
My iPod nano and a 2009 macbook are still fine.
conversely, my circa 2007 Lenovo t61 cost around $100 2 years ago and has been dropped, yanked off tables and has a couple of drinks in it and it just stares at you and takes it. It had a new battery last year and a new power connector (self installed) with no problems as they have full service manuals available.
That's engineering and service.
(I am a qualified EE so will not comment on the initial article as it makes me squirm a bit)