Here's what has died on me just outside a year since 2006 MacBook pro (logic board failure), iMac (won't boot), a MacBook (won't charge), just about every damn usb cable they've ever given me (broken at type a connector), airport express (melted). A friend of mine's MacBook pro caught fire. I won't even bother to catalogue the 22 dead iPhones my company has...
My iPod nano and a 2009 macbook are still fine.
conversely, my circa 2007 Lenovo t61 cost around $100 2 years ago and has been dropped, yanked off tables and has a couple of drinks in it and it just stares at you and takes it. It had a new battery last year and a new power connector (self installed) with no problems as they have full service manuals available.
That's engineering and service.
(I am a qualified EE so will not comment on the initial article as it makes me squirm a bit)
To give a more useful metric, for the last 4 years I have maintained a company have about 150 machines. 50% are Macbook Pros. 50% are Lenovos. I saw, on average, 5-6 Lenovos have some sort of hardware failure per year. The Macbook Pros would see 1-2 hardware failures per year. The Macbook Pros were also giving about 6-12 months of extra life before needing to be replaced. The external packaging of the Lenovos would produce MUCH more wear year over year than the aluminum Macbook Pro.
Lucky you :)
I am a qualified EE so will not comment on the initial article as it makes me squirm a bit.
I'm not, though I did take a lot of EE classes in college, and I think the article is fine. He took the thing apart and noted which components Apple used. He's not telling anyone how to engineer their own power supply.
It's interesting to note that most cheap replacement chargers don't have significant safety issues but produce harmful EMI, on the other hand it's not too hard to find name brand power supply which have significant safety issues (eg. low impedance connection between otherwise unconnected ground of EMI filter on primary side and output ground), often caused by combination of safety, EMC and design/size requirements and weird interactions between them and between requirements of different jurisdictions (EMC, ESD and safety requirements of EU sometimes tend to be contradictory).
Bear in mind my Airport express melted and blew my circuit breakers so shorts are definitely a possibility.
I've seen literally thousands of Apple USB cables in my work, and, while they probably won't hold up against heavy abuse as well as a rubbery booted end, they tend to either be totally fine or fraying at the ends.
The funny thing is that people with fraying ends tend to have all their cables fraying, whereas those with undamaged cables tend to have all undamaged cables.
There's something about use case here where Apple's cables just don't hold up to common (mis?)use case by a subset of their users.
A $5 set of Sony earphones goes through several orders of magnitude more shearing, twisting and pulling and last years. Why can't apple do that?
Because it looks pretty before it has sound engineering.
Apple doesn't do it for everything for mainly aesthetic and packaging reasons - iOS 30 pin cables are much smaller than they used to be before the iPhone came out, to fit in even smaller packaging.
I'm sure there would be complaints about the "big, ugly cable" if Apple beefed up their cables ends, especially if the only benefit would be to the 20-30% of the population that is hard on their gear, and even in that case the enhanced durability would only increase the cable's lifespan slightly.
In the EU we have quite hefty electrical safety laws and I doubt it could be CE marked or approved in the UK at least based on the line voltage isolation.
(Also an EE by education if not by trade, though that doesn't really count here)
What the real story is, is how cheaply power supply circuits are generally done in consumer electronics. They cut all kinds of corners and are quite amazing and often frightening. I actually find the cheap, hideous designs more impressive in some ways.
Indeed. Mad Man Muntz (http://en.wikipedia.org/wiki/Madman_Muntz) is alive and well and living in China.
Example: LED backlight cinema display? Neat! Then they cheap out using a glossy coating, not even a HUD, no scaler, no inputs, the worst stand in the market for a prosumer monitor etc. etc. etc. You'd think that a company claiming to be focusing on quality actually cares about ergonomics, but apple only care about looks and perceived quality. God knows how they can uphold that image when peoples devices fail constantly, I don't even know of anyone that own a working iPod anymore.
They can't even design the cooling for their laptops decently. They are hot and they are noisy (no margins at all), and it's not like you get anything in return. Buying an apple product you should just be happy if you can even exchange the battery.
As always, there is one thing they do right. On laptops it's the trackpad. But the rest just doesn't impress and is at best on par with the competition (but lacking the extra features (which isn't really a bad thing (most of the time) - but it makes you wonder what you pay for).
Apple has obviously gone to extra effort to reduce EMI interference, probably to keep the charger from interfering with the touchscreen
I've yet to encounter problems with any mobile phone during charging, so that makes you wonder whether apple uses a cheaper touchscreen than everyone else, or if other charges are just as good in regards to the EMI interference or if apple has higher margins than everyone else (which I highly doubt considering the problems apple create just to look good (cable strain relief springs to mind)).
It's nice to oversimplify for the sake of argument, but these kinds of non-reality based posts just show how polarizing Apple is.
Good design is important to most.
Oh, well in that case. Sigh.
Speakers, webcam and ambient light sensor... Those are the kind of non-features that you typically don't have to deal with on an apple product, if you care about a crappy webcam, inbuilt speakers in the monitor etc. you most certainly should buy a PC - they are crammed with useless stuff like that.
These kind of non-reality based post just shows just how blindly loyal the typical apple customer is.
(Oddly, I seem alone in this view. At Google, where a monitor stand is just a helpdesk ticket away, I've only seen about five other people that use them. Some people even use big stacks of paper to support their monitors. It's crazy!)
I also agree about Apple hardware running hot. I have a new mac mini on my desk and that thing is always very hot to the touch and often makes a lot of noise while under load. (To compare, I never hear a peep out of my generic 6-core tower, and that thing is always under heavy load.)
I don't think I've seen a cinema display with a monitor-arm, I'm a bit skeptic that people that buy the cinema display could ruin the aesthetics of the display with an arm (not that the cinema display is that good looking anyway).
I don't feel that an arm is needed when a good stand is included, and a good arm can easily cost as much as the monitor in the first place. Better to buy two monitors with good stands than one monitor with a crappy stand and an arm - in my opinion.
I really do not care how the connector sleeves look on my cables. I'd prefer them to last longer than a year or two.
On pricing, I don't have any figures but do not consider it out of line to consider an Apple product as being a durable replacement for several cheap plastic versions. An investment in OS X in the guise of a $1800 MacBook Pro could easily take the place of a $700, a $500 and a $600 laptop bought over the same period of time. By the end of the period the specs of the MacBook would be severely out of date, however in other respects its usage may be preferable to the usage of the new $600 laptop. If you are not comparing on this basis, Apple products may be up to 300% as expensive as their competition, again as shown by the laptop example.
These numbers are scientific, have high statistical confidence, and good to eighteen decimal places. I show them with only one or two significant figures, however the full figures are going through a process of peer review and should appear soon in the IEEE Spectrum. Or not...
I almost agree with you on Android/iPhone (though 6.5 times is a big, big exaggeration, more likely 40%), but absolutely disagree with you about OS X/Linux. To me (I don't do kernel debugging, but use tons of 'pro' development tools daily), they're on par, with Linux a tiny bit (a few percent) in the lead. OS X is more shiny and is more pleasant to use as a development machine, but in Linux your hands are freeer.
That's exactly the problem. I don't want to write formulas. Just as on Linux I don't have to write RPMs - I just download them and install them. Yes, I can write a formula. Yes, it is not hard (in 90% of the cases). But it takes time, and I don't have extra time for it. And it takes learning yet another thing, which I don't need - and I have enough things to learn already that I do need.
I don't want to spend mental energy on it - I just want it to work. Linux achieved it, to a great degree, and Mac OS X still didn't.
They offer degrees in using a smartphone? Amazing that I've been able to get along with one for so long.
In my own opinion, Apple products are probably about 30% better than competitors, but probably have 20% less features, however because they're simply better, they can charge probably 70% more than competitors simply because a lot people want and are willing to pay for the quality.
(Please dont read into the figures i've just used, i pulled them out my arse, they're for illustration purposes only.)