Re:Cutting a 700 Carat Rare Valuable Gemstone [video]
by mattficke on Sunday March 31, 2024 @05:52PM
(#39888397)
Automated cutting is used for less valuable stones, or when you need to have multiple stones of the exact same size and shape. Hand cutting is used when you want to maximize the yield, so you use the raw stone to guide the final size and shape.
Re:Cutting a 700 Carat Rare Valuable Gemstone [video]
by aledujke on Sunday March 31, 2024 @06:52PM
(#39888919)
I understand that this is how it is, but why? How is not using computerized process giving better yields?
Re:Cutting a 700 Carat Rare Valuable Gemstone [video]
by TylerE on Sunday March 31, 2024 @07:49PM
(#39889395)
Because you’re dead my with natural objects of varying size, shape, defect, etc. this isn’t taking a 4x4 piece of sheet metal and punching the same shape out of it 100 times.
Re:Cutting a 700 Carat Rare Valuable Gemstone [video]
by wmf on Monday April 01, 2024 @01:16AM
(#39891116)
For example, computer optimization is used to cut pieces out of leather to maximize yield while avoiding flaws.
Re:Cutting a 700 Carat Rare Valuable Gemstone [video]
by anfractuosity on Sunday March 31, 2024 @06:01PM
(#39888468)
Thanks, that makes sense, when you say 'you use the raw stone to guide the final size and shape' does that mean you might look for things like imperfections in the stone and try to remove those
Re:Cutting a 700 Carat Rare Valuable Gemstone [video]
by mattficke on Sunday March 31, 2024 @06:15PM
(#39888572)
Like if the raw stone is elongated you probably don’t want to cut it into a square finished gem, something like an oval cut would have less waste. And instead of trying to decide on an exact size in advance (like, exactly 1 ct), the final gem is whatever it is when the cutting is finished, so if it’s a smidge over you don’t shave it down.
Re:Cutting a 700 Carat Rare Valuable Gemstone [video]
by jasonwatkinspdx on Sunday March 31, 2024 @07:44PM
(#39889358)
Yes, finding a shape that excludes incursions is a big part of it. In the video he shows how he uses refractive fluids on the rough surface to make it less opaque so he can spot such inclusions more easily.
There seems relatively few videos of such machines on youtube, such as - https://www.youtube.com/watch?v=BnKcl2rw-qg maybe I'm not using the right keywords though.
Also - https://www.youtube.com/watch?v=QyNDtjpV2A8