It is also somewhat difficult to use solar power for cooling at midnight when it's still 35C.
I can do the inverse: warm my house to 22C and turn off the furnace overnight when it's -30C. The house won't drop below 20C. And that's a 50C differential. A 14C differential is trivial in comparison.
Congratulations I suppose.
Now instead of just spending hundreds of billions on building a new grid Australians will also have to spend hundreds of billions on insulating their houses.
And hope that your inside air temperature is not at the dew point of the hot, humid air that is outside (thus causing condensation).
Water in vapour form will be more diffuse and be everywhere the air is.
Further, your cladding / water control layer (which deals with rain (and UV)) generally needs to be open to air so that it can dry properly:
* https://en.wikipedia.org/wiki/Rainscreen
so that can lead to moist air getting places that water may not, and if you don't have insulation between the warm-moist outside and the cool-dry inside:
* https://buildingscience.com/documents/insights/bsi-001-the-p...
problems can start.
E.g. in colder climates many modern buildings are just hermetically sealed boxes with issues around CO2 levels etc.
I'm not sure if that'd work out to be cheaper than doing the proposed 60% wind/45% solar mix with inter-state transmission. It would reduce the need for new transmission lines, though.
Cooling at night requires batteries, but their cost is offset by how cheap they are to charge with excess solar resulting in positive feedback loops.
Further, AC needs to work far less hard at night as you avoid solar gain through windows etc, fewer devices are on reducing heat gain, outside temperature drop further reducing heat gain while also increasing AC efficiency.