Re:DongleHider+ Framework Laptop Expansion Card
by BonoboIO on Monday March 25, 2024 @08:32AM
(#39815504)
NICE! How did you get it to a working physical thing?
Any place somebody like me can buy this?
Re:DongleHider+ Framework Laptop Expansion Card
by zevv on Monday March 25, 2024 @08:53AM
(#39815692)
Right, please use this one instead of my crappy design, this PCB seems comes with a DC/DC converter to properly power your dongle with 5V instead of 3V3.
Re:DongleHider+ Framework Laptop Expansion Card
by zevv on Monday March 25, 2024 @08:39AM
(#39815571)
You just send the design files to a PCB manufacturer and receive the boards on your doorstep a few days later. 5 of these PCB's cost me $6 or so.
Re:DongleHider+ Framework Laptop Expansion Card
by cl3misch on Monday March 25, 2024 @06:01AM
(#39814356)
Could you share PCB files for that? I don't have experience with designing PCBs myself, but with the files I should be able to just order them from PCBWay.
Re:DongleHider+ Framework Laptop Expansion Card
by zevv on Monday March 25, 2024 @08:52AM
(#39815682)
Here are the original kicad files https://github.com/zevv/m2-to-usb
Please do check for yourself if this all makes sense, and I will not take responsibility for any fried laptopts or dongles. Note that the power supply for the dongle is too low: USB is supposed to deliver 5V, but on the M.2 only 3v3 is available. I decided to just give this a try and my Logitech dongle seems to be perfectly happy at this voltage. This might not be the case for others.
Re:DongleHider+ Framework Laptop Expansion Card
by 15155 on Monday March 25, 2024 @11:13AM
(#39817325)
This is something that could be rectified (if you pardon the little pun) with a 50 cent 3v3 to 5v TI charge pump if one wanted.
Re:DongleHider+ Framework Laptop Expansion Card
by _Microft on Monday March 25, 2024 @11:42AM
(#39817746)
Also make sure that the data lines do not have over-voltages then (level-shifters on these?).
Re:DongleHider+ Framework Laptop Expansion Card
by wkat4242 on Monday March 25, 2024 @10:54PM
(#39823866)
Also some firmware (bios) only accept certain devices on the M2 slots.
Re:DongleHider+ Framework Laptop Expansion Card
by sf_rob on Monday March 25, 2024 @11:02AM
(#39817191)
I'm very ignorant of hardware, but how does this work? I would have thought that M2 and USB protocols were divergent enough that this would require significant hardware/software emulation in the interface, but this looks to be a simple mapping of some I/O.
https://i.imgur.com/xGXl4Xt.jpeg
Crack the logitech dongle out of the USB casing and solder on the converter PCB.