Generally the keyword you want to search for is “industrial motherboard”, some server motherboards have them too. Asrock Rack and Asrock Industrial and Supermicro are great.
https://www.asrockrack.com/general/productdetail.asp?Model=A...
https://www.asrockind.com/en-gb/IMB-X1231
https://www.asrock.com/mb/AMD/X300TM-ITX/index.asp
(I fucking love asrock rack’s design team, absolute madlads and some seriously impressive density etc. they’re out there making the designs people don’t know they want, romed8-2T and genoad8x-2T are fantastic.)
Mini-box themselves sell dc-dc converters and “picoPSUs” that do this as well, although idk if they sell one with pcie power plugs. The M350 is a surprisingly high quality case for the price, and while my first picoPSU failed almost immediately (first shutdown iirc) they warrantied it no problem. A very funny trip through some oracle branded ordering/invoicing framework. Good people, good products.
My one criticism is that there is very obviously a lot of psu noise. I had a dell laptop and my pc desktop and the picopsu on an audio push-button switch and I kept getting a ton of ground loop and couldn’t figure it out etc and finally noticed it stopped and then came back as I plugged the M350 from the audio switch. Iirc it also showed through usb dac as well. I had the DIN plug brick and I think it has a lot of noise.
Intel NUCs are also extremely high quality implementations and have a great aftermarket with brands like akasa and hdplex etc.
You're right that they likely won't make 2 different dies. Desktop AM5 chips will just get a package with some of the memory controller pins unconnected. The big question is whether they'll also package the full width laptop chip with on-package memory in a package for desktop that's incompatible with AM5.
If they don't, somebody is going to solder that monster laptop chip into an ITX motherboard. People will grumble about a motherboard that can't upgrade either the CPU or the memory, but if the performance is there they'll still buy it.
I don't think putting the memory in the package helps much with practically achievable clock speed or bus widths compared to just soldering the memory nearby. (Consoles and discrete GPUs aren't doing on-package memory despite running GDDR at significantly higher frequencies than LPDDR.) And given that, there's even less reason to expect a messy hybrid configuration with half the memory controller connected to on-package LPDDR5x and half routed to DIMM slots, whether or not it uses the AM5 socket.
What I would suggest (and my suggestions are worth about as much as I'm getting paid to write this):
AMD should create an I/O Die (IOD) with 512 bit DRAM memory width. Then create an AM5 variant with 128 of those connected to the socket and the other 384 tied off. Then create variants with 256 bit and 512 bits connected to on-package memory and no off-package memory pins. Sell those to laptop manufacturers.
A big motivation on laptops is that slow & wide memory uses a lot less power than fast & narrow; on-package also uses a lot less power than driving the signal between chips.
Then in early 2026 introduce AM6 with 4 channel 256 bit memory support. Sell AM5 & AM6 in parallel for a while.
Why not? They already do the equivalent for SRAM. The big cost of a wider memory bus is routing it through the socket and the system board, which you're not doing since only the narrower bus goes through there. The wider bus is solely within the APU package.
You could also take advantage of the additional channels -- have e.g. 8 memory channels within the package and two more routed through the socket, for a total of 10. Now if you have 8GB on the package and 16GB off of it, you have 10GB striped across all 10 channels and another 14GB striped across two.
Continuing to have memory slots also allows you to sell chips with and without on-package DRAM and use the same socket. High bandwidth memory only makes much sense if you have a strong iGPU, since CPUs are rarely memory bandwidth bound. But low end systems and high end systems wouldn't have that, only mid-tier ones would. The low end system has a small iGPU where HBM is both unnecessary and too expensive. The high end system has the same small iGPU, or none at all, because it uses a big discrete GPU.
HBM is also more expensive than ordinary memory, but Windows will sit there eating several GB of RAM while doing nothing, so having some HBM and some DDR should lower costs compared with having the combined total in HBM.
You use HBM or GDDR if you want very high bandwidth, like top-end discrete GPUs would get. But then the memory itself is more expensive and you want the external channels to reduce cost, so the OS bloat can go in the cheap memory and preserve the limited amount of high cost memory for what needs it.
This is notably not what Apple does -- they're just using ordinary LPDDR5 with a wide bus, equivalent to having a lot of memory channels. It gets them several hundred GB/s worth of bandwidth, similar to a midrange discrete GPU. If you were going to do that, you could put most of the channels within the package and still have two of them outside of it.
That sort of configuration would allow some flexibility. The on-package memory might have lower latency (if they're both just ordinary DDR this isn't going to be much difference if any), but if you configured the system to only interleave between the on-package memory channels then the "close" memory could achieve that lower latency. Interleaving the external channels into the same pool would have a small latency hit but increase bandwidth by e.g. 25%. Which could be configured in UEFI based on your expected workload.
Intel's Lunar Lake mobile due out this year is supposedly using 16GB or 32GB on-package LPDDR5X RAM. Rumor has it it's 8533MHz. That'd be 68.2GB/s. https://www.tomshardware.com/tech-industry/manufacturing/int...
Still feels like we need more ram bandwidth. In general I think throughput is the new moat, the new market segmentation; consumer cores now have gobs of CPU and GPU (albiet we seem to have plateau'ed), but limited PCIe and ram bandwidth. We kind of started seeing USB4 compelling some more bandwidth, but I think even Intel is no longer offering USB4 on chip in many upcoming mobile chips, so that's kind of been defeated too.
Anyhow, AMD's next Strix Point is due end of year or there-after, but then their big Strix, Strix Halo has quad channels. That'll be exciting as heck. Folks may finally get their console crushers, perhaps.
I'd expect that you could probably get okay yields at okay costs if you are running a process that's a rev or two behind and making smaller chiplets that are then wired together after testing -- like the pentium pro's cache but for main memory to get 2 / 4 / 8gb ram all on "chip"
It'd probably cost more than a normal CPU, but the trade off is much more speed and the actual computer / motherboard at that point would just be a couple USB devices. You (the CPU maker) would grab a lot more of the per-unit profit.
Ah -- that's why they don't do it; no vendor would want their milkshake drunk...
Because it's not just the memory chip, also the interposer it's stacked on top of, which now needs to be bigger, which means you need to find more room in the PCB (today) or a bigger silicon interposer (likely in the near future) which reduces yields, and so on and so forth. If you wanted to have more than the very limited SoC RAM, you'd also then be looking at having multiple DRAM controllers, which also adds to surface area, and so on and so forth.
My daily driver is an M1 Max MBP which I’m happy with, but if I were to build a Linux productivity box (no gaming, that’s handled by a different machine), something like a 7840U on an ITX board with a cooler just big enough to practically never be audible would sound pretty great.
[edit] The 7900 delievers ~89% of the performance of the 7900X at 170W. 7700 & 7600 90% compared to the X counterparts.
Under the desk there's a linux box made with a Ryzen 5600G, that one does 20W at idle.
To work around memory issues, these CPUs would need some onboard memory which would increase costs a bit, but the tradeoff is that it’d make for simpler, cheaper low-end motherboards. One can imagine a mini-ITX board with nothing but a CPU socket and a couple of M.2 slots that’d cost significantly less than current entry-level ITX boards. A full system upgrade could be performed by simply swapping out the CPU which would be great for non-enthusiasts; without a power hungry discrete GPU, power requirements are unlikely to increase meaningfully (and in fact are likely to decrease with upgrades), so upgrading wouldn’t necessitate a PSU change. These hypothetical boxes could easily stay relevant for a decade or more.
Higher end SKUs of motherboards for this type of CPU could have the usual RAM slots (acting as a second tier of slower RAM in place of swap), PCI slots, etc.