Re:12VO power standard appears to be gaining steam, will red...
by wtallis on Tuesday December 26, 2023 @07:19PM
(#38777568)
For at least ~20 years, the typical solution for ATX power supplies has been to make one big 12V rail, and then tack on up to about 120W of converters to step down from 12V to 5V and 3.3V. In practice, this has meant that anyone running less than a dozen disk drives has excess capacity on their 5V rail, but no capacity from the 12V rail was sacrificed to provide that.
There was a time when the 5V and 3.3V rails on ATX power supplies weren't vestigial, but that era was shorter than the current era of all the major high-power components using a 12V supply.
Re:12VO power standard appears to be gaining steam, will red...
by toast0 on Tuesday December 26, 2023 @07:59PM
(#38777853)
Somewhere in the last two decades, multiple 12v rails was popular, but I think we've gone back to single rails.
Re:12VO power standard appears to be gaining steam, will red...
by wtallis on Tuesday December 26, 2023 @08:25PM
(#38778058)
For a while, some PSUs were dividing their single 12V rail into separate outputs with individual current limits, to more closely adhere to older ATX standards. Consumers were not interested in managing the complexity of balancing power between virtual rails while CPU and GPU power were skyrocketing.
If you put most on 12v but you have a motherboard pulling more from 5v, you have a problem. Currently power supplies divide it based on average motherboard usage, but these slowly change, and your old power supply will stop having the optimum mix.
The solution is to output it all on one rail.