Re:What We Learned Making a Plastic Injection Mold with a Ch...
by starky on Monday October 09, 2023 @12:37AM
(#37816970)
Yes, I've got my DIY one working with Home Assistant. It is just running on an ESP32 so you can load a configuration to it via ESPHome [1].
Re:What We Learned Making a Plastic Injection Mold with a Ch...
by ftigis on Monday October 09, 2023 @12:23AM
(#37816910)
There's this bit in the description:
https://www.airgradient.com/indoor/#:~:text=The%20AirGradien....
Re:What We Learned Making a Plastic Injection Mold with a Ch...
by montjoy on Monday October 09, 2023 @01:05AM
(#37817059)
HA has made it really easy to flash the esp chip. You just plug the chip directly into your computer for the initial flash. After that you can do it remotely.
Re:What We Learned Making a Plastic Injection Mold with a Ch...
by ahaucnx on Monday October 09, 2023 @02:23AM
(#37817487)
Achim from AirGradient here. Yes all our monitors [1] work nicely with Home Assistant. Especially via ESPHome [2].
[1] https://www.airgradient.com/indoor/
[2] https://www.airgradient.com/integrations/home-assistant-esp-...
Re:What We Learned Making a Plastic Injection Mold with a Ch...
by robga on Monday October 09, 2023 @02:41AM
(#37817618)
I run several self built Air Gradients on ESPHome and they do not connect to the cloud - or any external service. Works well with HA. Rock solid for 2+ years. I have to reboot them every 6-9mo or so if they “freeze”.
I've been in the market for a few more CO2/air quality monitors around the house, but I'm unhappy with the very proprietary nature of the uHoo and it's incredible expense.