Re:Why does the USA use 110V and UK use 230-240V?
by sokoloff on Tuesday August 29, 2023 @03:08PM
(#37312388)
> solved thet by running the lighting on 220V with sets of two 110V bulbs in series
A related tip is to build a "dim bulb tester" to help you diagnose short circuits on mains-powered equipment. I have a traditional incandescent lightbulb in a porcelain socket wired in series with an outlet (and a switch). A non-shorted load will tend to work pretty well as the cold/cool incandescent bulb is fairly low resistance in series with the load. A shorted load will light up the light bulb brightly but not trip any breakers, allowing the opportunity to do some troubleshooting on the bench.
I've also used this concept several times to find short circuits in house wiring. Put the dim bulb tester in series with the circuit that's shorted and then, using a non-contact voltage tester, find where the measurement on the NCVT changes. That's likely where your short is.
In building such a device, you're on your own liability-wise; please don't be dumb.
A related tip is to build a "dim bulb tester" to help you diagnose short circuits on mains-powered equipment. I have a traditional incandescent lightbulb in a porcelain socket wired in series with an outlet (and a switch). A non-shorted load will tend to work pretty well as the cold/cool incandescent bulb is fairly low resistance in series with the load. A shorted load will light up the light bulb brightly but not trip any breakers, allowing the opportunity to do some troubleshooting on the bench.
I've also used this concept several times to find short circuits in house wiring. Put the dim bulb tester in series with the circuit that's shorted and then, using a non-contact voltage tester, find where the measurement on the NCVT changes. That's likely where your short is.
In building such a device, you're on your own liability-wise; please don't be dumb.