Considering he's the kind of person that rides around the world, and that the suggestions seem well presented, internal gear hub + belt drive seems like a solid combo for reliability.
It is. But make sure you get a solid internal gear hub because they're not all made the same. Shimano has an indestructible five gear model, the higher the number of gears the less torque the hub can deal with. Rohloff is beautiful but I think it is overpriced for what it offers (that's a personal opinion, others may well disagree). B-brands or anything open or chain based is going to be a lot less reliable.
He actually recommends Shimano Alfine 8, he finds it has a good balance between robustness and the way it handles.
Rohloff hubs are made in Germany by a workforce that enjoys good working conditions, and moreover each hold a stake in the company. That’s something to remember any time you compare the price of a Rohloff hub to an Asian-made component.
I'd say the onus is on the commenter to show that other countries do better than Germany, a world leader in worker rights.
https://www.prioritybicycles.com/pages/about-us
[disclaimer] Neither affiliated nor do i own one :(
I guess biking is still dominated by guys and by racing. If bike commuting picks up, low entry bikes should outnumber sporty bikes 10:1, I hope.
Edit: they only sell in the US, not in Europe :-(
Edit: those are not commuting bikes :-))) Now, THESE are commuting bikes: https://www.batavus.nl/elektrische-fietsen
I didn't mean cheap, but I can see how it can be read that way :-)
For example, looking at medium - large sizes, Trek Marlin 8 Gen 3 [1] has a standover of ~750mm, while Nukeproof Scout [2] has one of just ~710mm.
[1]: https://www.trekbikes.com/us/en_US/bikes/mountain-bikes/cros...
I get how internal gears are great and reliable and probably a great choice if You need a bike that will carry 30kg of baggage for 20k+ kilometers and won't break. However, I don't plan on doing either of those things.
I'm fairly happy to do my basic yearly maintenance myself (chain / cassette change), if in return I get a system that will cost me way less and has an upgrade tree that's an order of magnitude larger than that of belt drives.
For me, part of the fun in bike building / maintenance is the fact that Your tastes / needs change. And to a good degree, if You stay in the mainstream components, bikes these days are pretty flexible / adaptable to that. In my case, I'd probably struggle with handlebars (I'm a fan of drops, which would probably limit my choice of shifters) and frame geometry (as I age, I'm starting to develop a pretty well honed taste for what size / fit do I want to have in a bike frame).
Hard core no fuss commuters that don't ever want to touch or tinker with bike parts.
The things that make a bike work well for 20k km in harsh conditions in Kazakhstan and India also make a bike work well with a child seat in the city during the summer and winter and out grocery shopping, etc.
I would have loved to build me something around a Rohloff gearbox with a belt compatible frame, but that thing would set me back at least 2k EUR / USD. By comparison, my current commuter setup is a combo of two single speed bikes (one light, one with racks for more cargo / shopping capacity), either of which I got used for 50 and 100Eur respectively. And my current bikepacking bike is a 1200EUR steel Kona with some extra components slapped on top. Basically, I've got 3 bikes for 3 diferent uses for a price of that gearbox one.
Where is this a thing? I’m fairly familiar with retro-grouch bike brands, and their products cost less than half of that. Today when carbon frames, Rohloff hubs, or Pinion gearboxes are all the rage, and those are very expensive parts that push up the cost of a bike by thousands, retro-grouch steel bikes often seem cheap in comparison. One exception is when the frame is custom-made in a Western country instead of outsourced to Taiwan like most brands, but that still shouldn’t reach $10K.
Especially not worth it now that midrange bikes come with disc brakes and 1x10 or 1x12 derailleur drivetrains (no front derailleur) that are reliable, efficient, light and inexpensive. Without a front derailleur adjustment is a cinch and any difficulty or mental load for a casual rider to change gears goes away. Things going slightly out of adjustment and then over time some gear combinations causing your chain to skip or fall off is almost a thing of the past.
And only the drivetrain is lower maintenance. Brakes are the same (unless you also decide you don’t really need effective brakes and go with roller/drum brakes over disc brakes). Maintenance of tires/punctures is much more time consuming.
You don't need super duper brakes for casual riding, hydraulic disk brakes are good enough without much maintenance, maybe just once per year.
Unless the tires are skinny, they shouldn't puncture very often and replacing them isn't that hard or expensive.
You won't break any speed records with a belt and an internal gearhub, but they aren't that inefficient especially when you don't waste time or money cleaning the traditional drivetrain.
But overall I think the benefits are not worth the extra cost/lack of choice in models, and other demerits.
The site has been "maintained" (heavily edited and appended) by a guy named John Allen who I think mostly just knows a bunch of people in the retrogrouch scene (you know the types - $10k steel randonneur bikes), has never worked as a bike mechanic, seems to have little practical hands-on knowledge, and repeatedly pontificates about stuff he doesn't seem to have experience with. A lot of his additions and modifications seem to be his personal opinions.
I don't know if it's since been revised, but the stuff he wrote about belt drive bikes years ago made it clear he was just parroting shit he'd read elsewhere by people who had never ridden one for an extended period of time or owned one. Despite what he claims, they're virtually unbeatable for all-weather transportation bikes.