News for hackers. Stuff that matters.
Re:Sheldon Brown's Bicycle Technical Info by jacquesm on Tuesday August 08, 2023 @07:38AM (#37047448)
> Internal gear hub + belt drive seems like a solid combo for reliability

It is. But make sure you get a solid internal gear hub because they're not all made the same. Shimano has an indestructible five gear model, the higher the number of gears the less torque the hub can deal with. Rohloff is beautiful but I think it is overpriced for what it offers (that's a personal opinion, others may well disagree). B-brands or anything open or chain based is going to be a lot less reliable.

Re:Sheldon Brown's Bicycle Technical Info by oblio on Tuesday August 08, 2023 @08:04AM (#37047686)
> Shimano has an indestructible five gear model, the higher the number of gears the less torque the hub can deal with.

He actually recommends Shimano Alfine 8, he finds it has a good balance between robustness and the way it handles.

Re:Sheldon Brown's Bicycle Technical Info by jacquesm on Tuesday August 08, 2023 @08:35AM (#37048049)
Yes, that makes sense, the 8 is a nice optimum. But if you engineer for maximum reliability and still need more than 3 gears then that five is as good as it gets. It's the NEXUS SG-C7002-5CD 5-speed model, to be specific. There is also an e-bike one for even more torque applications.
Re:Sheldon Brown's Bicycle Technical Info by adgjlsfhk1 on Tuesday August 08, 2023 @10:16AM (#37049300)
IMO for e-bike you probably should be looking at the enviolo CVTs. Sure they're a little less efficient but you can get 330% gear range with ridiculous durability and have the option for electronic shifting. (that said my bike is a non-ebike shimano alfine 8)
Re:Sheldon Brown's Bicycle Technical Info by jacquesm on Tuesday August 08, 2023 @12:21PM (#37051430)
Enviolo sucks. We have one Enviolo bike in the family. We use it as creative punishment. It sucks. Even for an e-bike.
Re:Sheldon Brown's Bicycle Technical Info by oblio on Tuesday August 08, 2023 @12:34PM (#37051653)
Why does it suck?
Re:Sheldon Brown's Bicycle Technical Info by adgjlsfhk1 on Tuesday August 08, 2023 @02:54PM (#37053767)
they are slow and heavy. Specifically they are roughly 85% efficient compared to ~90% for an internal gearbox or ~95% for a derailer. They also add about 1 pound compared to a gearbox or 2 pounds compared to a 1x derailer system.
Re:Sheldon Brown's Bicycle Technical Info by oblio on Tuesday August 08, 2023 @05:21PM (#37055635)
Does it matter for ebikes? Especially for commuter bikes.
Re:Sheldon Brown's Bicycle Technical Info by adgjlsfhk1 on Tuesday August 08, 2023 @05:57PM (#37055993)
I'd argue no (that's why I recommended it for ebikes 2 levels up)
Re:Sheldon Brown's Bicycle Technical Info by jacquesm on Tuesday August 08, 2023 @08:00PM (#37057093)
That depends: if you are at the edge of your range then the Enviolo may well cause you to have to pedal the hard way with a bike that feels as though you're going uphill all the time. I only see one positive about the Enviolo and that's that you can change to low gear at a traffic light even when you're stopped.
Re:Sheldon Brown's Bicycle Technical Info by jacquesm on Tuesday August 08, 2023 @03:46PM (#37054513)
Because it eats up range like there is no tomorrow, makes all kinds of weird sounds, you need to keep it taut on the shifter to get to the highest gear ratio (it will 'unwind' all by itself if you don't do that), and once the batteries run out the bike is so heavy to cycle you may as well give up. And this is as good as it gets, nicely lubricated, regulated as good as possible. It's a very interesting idea but it is either not executed well enough or it is inherently problematic and it won't get better. Buying that bike was a serious mistake, fortunately that wasn't my decision because I'd feel miserable. CVT on a bike is a very nice feature and there are some really interesting developments in that space, but Enviolo isn't it, no matter how much it gets pushed.
Re:Sheldon Brown's Bicycle Technical Info by johnwalkr on Tuesday August 08, 2023 @02:08PM (#37053155)
I bought a enviolo CVT about 12 years ago because I happened to find one unused a cheap on eBay. It was so heavy once I handled it and the shifter seemed cheap so I didn’t even try to build a wheel with it. I could barely give it away, ended up trading it for a tune-up.
Re:Sheldon Brown's Bicycle Technical Info by OfSanguineFire on Tuesday August 08, 2023 @10:05AM (#37049147)
> Rohloff is beautiful but I think it is overpriced for what it offers

Rohloff hubs are made in Germany by a workforce that enjoys good working conditions, and moreover each hold a stake in the company. That’s something to remember any time you compare the price of a Rohloff hub to an Asian-made component.

Re:Sheldon Brown's Bicycle Technical Info by wolverine876 on Tuesday August 08, 2023 @05:18PM (#37055595)
All of Asia has the same labor practices? What about Japan?
Re:Sheldon Brown's Bicycle Technical Info by OfSanguineFire on Tuesday August 08, 2023 @05:22PM (#37055643)
Working hours in Japan are infamously higher than the German standard, and vacation days fewer. At German companies, employees can also be much more direct and straightforward with their superiors. Sure, Shimano’s facilities in Japan are no Chinese or Malaysian sweatshop, but I like that a Rohloff purchase supports a higher quality of life.
Re:Sheldon Brown's Bicycle Technical Info by oblio on Tuesday August 08, 2023 @05:27PM (#37055696)
German worker standards and unions are super strong.

I'd say the onus is on the commenter to show that other countries do better than Germany, a world leader in worker rights.