it was also used during warranty/return phase to validate customer concerns. The production line usually checked the boards via the JTAG pins.
Re:Nintendo 64 Test Cart ROM
by yjftsjthsd-h on Tuesday July 18, 2023 @06:15PM
(#36779794)
Did they take the JTAG pins off? I'm wondering why you would test differently on the way out of the factory and back in for repair claims
It's a lot easier to pop a cartridge in than to disassemble the case to get at the JTAG pins.
I don't think there necessarily ever were pins. JTAG on a production line is normally hooked up via a bed of nails.
Re:Nintendo 64 Test Cart ROM
by colechristensen on Wednesday July 19, 2023 @12:38AM
(#36782178)
These are called pogo pins
these care called a bed of nails
Re:Nintendo 64 Test Cart ROM
by InitialLastName on Tuesday July 18, 2023 @09:11PM
(#36781041)
In addition to what the others said regarding disassembly, it's a lot easier to distribute (and train remote technicians to use/maintain) a test cartridge to service centers around the world than to set up the $xx,000+ bespoke bed of nails test fixtures that you would use on the production line.
Re:Nintendo 64 Test Cart ROM
by mips_r4300i on Wednesday July 19, 2023 @04:54AM
(#36783650)
JTAG doesn't really exist on the N64 hardware, it's only present on the CPU and the pins are hardwired to VCC/gnd.
Even if it did work, it wouldn't be sufficient to test the rest of the system, which doesn't have any concept of JTAG.
The other major chip (RCP) does have an undocumented test mode, it allowed the verification guys at SGI introspection into various registers/state by exposing them onto the cartridge bus as gpio. I don't think this is written down anywhere though.
Worth noting that (AIUI) such test ROMs are often used these days to test the faithfulness of emulators.
Clever!
Related and also interesting: https://tcrf.net/Category:Nintendo_Console_Testing_Software