News for hackers. Stuff that matters.
Re:Nintendo 64 Test Cart ROM by rwmj on Tuesday July 18, 2023 @04:14PM (#36778471)
I assume a Test Cartridge is some kind of developer tool from back in the day?
Re:Nintendo 64 Test Cart ROM by coldpie on Tuesday July 18, 2023 @04:20PM (#36778550)
Sounds from the article like it was used in factories, maybe to verify that a new production line or hardware revision is building consoles that function correctly?

Related and also interesting: https://tcrf.net/Category:Nintendo_Console_Testing_Software

Re:Nintendo 64 Test Cart ROM by serf on Tuesday July 18, 2023 @05:16PM (#36779220)
it was also used during warranty/return phase to validate customer concerns. The production line usually checked the boards via the JTAG pins.
Re:Nintendo 64 Test Cart ROM by yjftsjthsd-h on Tuesday July 18, 2023 @06:15PM (#36779794)
Did they take the JTAG pins off? I'm wondering why you would test differently on the way out of the factory and back in for repair claims
Re:Nintendo 64 Test Cart ROM by anamexis on Tuesday July 18, 2023 @06:23PM (#36779858)
It's a lot easier to pop a cartridge in than to disassemble the case to get at the JTAG pins.
Re:Nintendo 64 Test Cart ROM by monocasa on Tuesday July 18, 2023 @09:00PM (#36780980)
I don't think there necessarily ever were pins. JTAG on a production line is normally hooked up via a bed of nails.
Re:Nintendo 64 Test Cart ROM by colechristensen on Wednesday July 19, 2023 @12:38AM (#36782178)
Re:Nintendo 64 Test Cart ROM by naraic0o on Wednesday July 19, 2023 @04:34AM (#36783514)
Re:Nintendo 64 Test Cart ROM by InitialLastName on Tuesday July 18, 2023 @09:11PM (#36781041)
In addition to what the others said regarding disassembly, it's a lot easier to distribute (and train remote technicians to use/maintain) a test cartridge to service centers around the world than to set up the $xx,000+ bespoke bed of nails test fixtures that you would use on the production line.
Re:Nintendo 64 Test Cart ROM by mips_r4300i on Wednesday July 19, 2023 @04:54AM (#36783650)
JTAG doesn't really exist on the N64 hardware, it's only present on the CPU and the pins are hardwired to VCC/gnd.

Even if it did work, it wouldn't be sufficient to test the rest of the system, which doesn't have any concept of JTAG.

The other major chip (RCP) does have an undocumented test mode, it allowed the verification guys at SGI introspection into various registers/state by exposing them onto the cartridge bus as gpio. I don't think this is written down anywhere though.

Re:Nintendo 64 Test Cart ROM by Sniffnoy on Tuesday July 18, 2023 @05:35PM (#36779399)
Worth noting that (AIUI) such test ROMs are often used these days to test the faithfulness of emulators.
Re:Nintendo 64 Test Cart ROM by Arrath on Tuesday July 18, 2023 @05:40PM (#36779450)
Clever!
Re:Nintendo 64 Test Cart ROM by nunez on Tuesday July 18, 2023 @08:57PM (#36780950)
Wow; this was fascinating!

Interestingly the world class service number in the SNES Aging test is still active!

Re:Nintendo 64 Test Cart ROM by Waterluvian on Tuesday July 18, 2023 @07:01PM (#36780184)
There’s a ton of these designed in modern times for emulator development. I’m not specifically sure about this one though.
Re:Nintendo 64 Test Cart ROM by asda22sdasd on Wednesday July 19, 2023 @04:19AM (#36783417)
> I’m not specifically sure about this one though.

Curiously, details is in the article being discussed.

Re:Nintendo 64 Test Cart ROM by mips_r4300i on Wednesday July 19, 2023 @04:59AM (#36783692)
It's a production test suite, designed for use with a custom jig that plugs into all the various ports to fully test everything, not just the cartridge. The custom test jig named 'zaru' which if I recall is Japanese for a rice strainer (appropriate for go/no-go tests) can be detected by the test suite and unlocks all the tests. It even controls the operator pass/fail lights on the jig from this software.

Also, authorized Nintendo service centers got the carts as a way to diagnose customer issues, but obviously without the factory jig.

The funny part is that the stress tests parts actually render all sorts of interesting 3d models that engineers inside SGI grabbed at random. The Utah teapot, a rocking chair, a cow, a VW beetle, the SGI logo itself. All rendered into an off screen framebuffer and checksummed.