I think that on macOS, the hardware is also miles ahead of what you can get on a pc. This isn't to downplay the software because I remember my MBP's touchpad being wonky under windows a few years back.
But things have improved. My HP EliteBook 845 G8 is fine under Linux/X11. Still somewhat worse than the 2013 MBP, but not nearly as horrible as the HP two generations back. I'd rate it as comparable to my 2012 unibody MBP.
Under windows, it's fine, too, but it has a weird lag if you pay attention.
Here in Europe, at least in 2013, the adapter had two ways of plugging into an outlet: a cable and a plug that could be clipped on. The plug only had two prongs, while the cable had a ground connector. I'd get the "buzz" if the adapter wasn't grounded.
This also happens with my HP laptop if I plug it into an ungrounded usb-c adapter, so I'd expect the same thing to happen to iPads.
We have many Windows laptops in the family, and everyone uses mice most of the time. I only use a mouse on my Macbook when it's hooked up to an external display. Even then, I sometimes wish I had a Magic Trackpad.
Yup, at work we have "high end" enterprise HP Elitebooks. We've had a general refresh 1.5-2 years ago. Basically, everyone lugs around a mouse. And they're not "nice" mice, either, so it's not like they're getting any extra fancy ergonomics or what not. Hell, generally they're the basic 3 button Logitech, without even a back button (don't know how people can go without this today).
Windows, like X11, uses a hardware mouse cursor. It sends a sprite to the GPU along with coordinates and it is drawn by the GPU outside your compositor's pipeline.
The touchpad, though, has a bit of lag that's noticeable when making sudden changes. For "regular" use it's not much of a problem and not really noticeable if you don't pay attention. But I only rarely use Windows, so whenever I do, I see it for a few minutes at first. It's a bit like moving to a Bluetooth mouse after using a wired one.
My main gripe with the touchpad under windows, though, is that I can't get the "tap and hold" behavior of macOS/Linux. Meaning that if a double tap and drag, say to select text, it will "hold the tap" for a short time if I lift my finger. Since the touchpad is of the hinged variety, it's impractical to actually press on it and move the finger while pressed. Bonus points for pressing near the top not exactly doing anything.
I think there is a setting to tap and hold, but that'll hold the tap indefinitely (or at least very long) until you tap again.
I use the same mouse on Mac, Linux, and windows. It feels exactly the same on each OS when configured to the same dpi/speed/accell and polling rate
personal opinion: have you looked at the sheer number of options exposed for a modern trackpad in linux?
it's insane; I don't really have any problem understanding the difficulty in achieving a good set of defaults -- there were like 200 exposed parameters the last time I tried to get it 'just right'. (a modern synaptics' touchpad on a new dell XPS.)
if I was on some quest to make it feel like Windows or OSX i'd probably have to give up -- not that those two feel better to me, but the sheer granularity is intimidating.
NOTE: this isn't to say that I dislike how the trackpad feels in Linux; I usually always get to a nice set of parameters that feels good to me, they just aren't the same as Windows or OSX, although I have little doubt that the granularity is there for someone to get it right.
Trackpads are anything but standardized. For example those Apple's been using for quite a while now are built with the same touch controllers they use in iPhones (essentially making them iPhone screens sans screen panel), and on the extreme opposite end you've got cheap ones like is built into a Logitech media center combo board I bought several years ago which emulates a mouse instead of presenting itself to the connected device as a trackpad (and as you might expect, is terrible to use).
For what it's worth, I've been using an Apple Magic Trackpad 2 for five+ years via USB and Bluetooth and it works well. Pinch to zoom, two-finger swipe for forward/backward in the browser, and others.
That said, I have a style involving sometimes using both index fingers on my System76 trackpad and the experience is really good, but to be honest it always takes me a minute to get in a groove with it.
More importantly, there is a solution for fixing this and I've done my part by open sourcing a multi-touch gesture solution (userland daemon) that's driver-agnostic and runs on top of the vendor-provided drivers w/ their correct acceleration curves [1].
(But TBH I don't know if this applies to Apple's trackpad because I don't know if there are any first-party drivers w/ proper acceleration curves for Linux or if they've all been – unfortunately poorly – reverse engineered.)
[0]: https://neosmart.net/blog/multi-touch-gestures-on-linux/
In MacOS, there are additional things you can do.
* Spread or bring closer 2-4 fingers.
* Swipe from the edge to do a different action than swiping in the bulk of the pad.
Are there any system limitations on linux that prevent the implementation of such gestures?
(Also, syngestures separately recognizes and supports both taps and swipes, and it supports both/either with anywhere from 1 to 5 fingers.)
With syngestures, we can
* Tap with 1-5 fingers. (5 actions)
* Swipe with one finger (just the mouse) (1 action)
* Swipe with two fingers either horizontally or vertically (usually scroll) (2 actions)
* Swipe with 3,4,5 fingers either up/down/left/right (3x4=12 actions)
Total is 20 actions. So actually there are more possibilities with syngestures.
It’s easy to separate that into pre- and post- hooks, but the most reliable method I found for counting fingers in a gesture is “the maximum number of fingers during the gesture at any point” as it allows for variations in timing, location, direction, etc of first, second, subsequent fingers for a multi-finger gesture (you can’t assume they’re all present from the very start or that one finger won’t accidentally be raised mid-gesture). I’d have to change that to “detect number of fingers within xx ms of start of gesture” but that is somewhat problematic because the cursor position actually changes in response to touch between when your fist finger touched the trackpad and the time when (in your example) the third finger was finally added to the gesture (even if that all takes place in “a split second”). So it can be done but you might need to be intentional about being more careful with your three-finger swipe-to-drag to ensure the cursor remains within the desired click area until your third finger has made contact with the trackpad and hover there a brief moment to allow the daemon to determine you’re not going to add a fourth finger to the mix (changing it to another gesture altogether).
It would be entirely possible to retroactively generate a mouse down event at the original gesture start (with the first finger) when the third finger is added and no fourth finger is added, but that might be jarring from a UX perspective (cursor moves out of the bounding rectangle then the drag starts some ms later).
Basically, it is an independent subscriber to RawInput messages that only keeps track of whether or not to send three-finger drag, and posts emulated mouse messages using SendInput. I have a few other scripts that each run as independent userland processes that only monitors their own trigger and nothing else.
Tangentially, my TPMouse[1] script implemented inertia in a framerate-independent way so that it uses very little resource while having perfect simulation stability.
A previous discussion where I explained the analytic derivation for this low-resource exact-solution damped inertia can be seen in [10]
[0] https://github.com/EsportToys/PrecisionThreeFingerDrag/blob/...
[1] https://github.com/EsportToys/TPMouse
[10] https://old.reddit.com/r/Trackballs/comments/ym9q2t/tpmouse_...
I also like that you can use two-fingers to zoom in on a webpage with Firefox, just as on Windows.
GNOME is the first DE I've tried where all of this touchpad support was implemented so well, although I haven't tried that many, to be fair.
Sorry if I sound like an advertisement; I just wanted to be specific about what I like about GNOME's trackpad support as opposed to just saying that it "works fine for me."
KDE gives you more granular trackpad settings than MacOS offers out-of-box, and the Wayland session has more gestures than you can shake a stick at. I think you owe yourself another visit :)
UX is a very subjective thing, and it depends a lot on your background: you're never going to feel instantly home when switching platform no matter how “polished” it is supposed to be.
You should give your Apple Trackpad a new try on the latest Gnome on Wayland.
Maybe it is my mouse but I kinda doubt it.
Linux have it but the acceleration curve is quite different from Windows' offering.
> A mouse acceleration feature accelerates the motion of your pointer. It enables users to move their pointer faster and cover more on-screen distance with merely a faster mouse movement rather than the physical distance the mouse covers.
https://www.makeuseof.com/windows-10-disable-mouse-accelerat...
On OSX (and possibly Windows although its been a long time), its soooooo silky smooth. But on multiple Linux distros i've used, including Pop and Ubuntu, it just doesn't feel right even after adjusting all sorts of settings.
This is one thing thats kept me from full time Linux DE usage :(