News for hackers. Stuff that matters.
Re:CAD Sketcher, free and open-source project bringing CAD l... by samwillis on Sunday February 19, 2023 @07:55AM (#34857199)
I always love to see these projects attempting to create an Open-source parametric CAD tool, but I think they will never get the the level of functionality and stability required. The fundamental issue for all of them is the lack of a robust open source "parametric CAD kernel", these the the central core that understands BREP and implements the geometric operations.

The most widely used kernel is OpenCascade, the kernel used by FreeCad. However it is outdated, unstable and limited in significant ways with no realistic future prospects. It is unfortunately the limiting factor of FreeCads functionality and prevents any serious use of it.

The most widely used commercial kernel is Parasolid, used in many packages including SolidWorks, OnSpace, and NX.

What I would love to see is Siemens adopting a model similar to some of the game engines (Unreal and Unity) where it's free up until a revenue limit. Opening up Parasolid for "free" open source and small commercial operations would be both brilliant for society but also for Siemens, it would only result in a growth in the use of Parasolid and increased revenue.

Re:CAD Sketcher, free and open-source project bringing CAD l... by nine_k on Sunday February 19, 2023 @08:32AM (#34857417)
To have access to something commercial for free may be nice.

The ideals of free software though call to produce free and open code because it remains free, open, and available. Siemens, were it to graciously offer some free tier access, would be also in a position to limit or withdraw such access at any moment. (This even applies to the paid licenses.)

However limited OpenCascade is, it's here, and it's usable, up to a point. I hope that a successor to it will emerge, if there's a need.

Re:CAD Sketcher, free and open-source project bringing CAD l... by traverseda on Sunday February 19, 2023 @09:07AM (#34857661)
>these the the central core that understands BREP and implements the geometric operations.

I've seen people quote a good modern CAD kernal as a 100 man year project. It's probably not going to happen, maybe there's some avenue for government funding?

Alternatively Signed-Distance-Functions are pretty nice. They're not BREP, but they're a lot easier to implement, and it might be possible to shove them into a BREP-shaped hole.

Here's a signed-distance-function based CAD kernal written in a few thousand lines of python+numpy, that seems to be about as fast as openscad. Maybe faster. https://github.com/fogleman/sdf

Re:CAD Sketcher, free and open-source project bringing CAD l... by Arcanum-XIII on Sunday February 19, 2023 @09:55AM (#34858064)
Funny, seems Russia did that in 2011. Now, which country, beside China would go that far ?
Re:CAD Sketcher, free and open-source project bringing CAD l... by gene-h on Sunday February 19, 2023 @10:15AM (#34858240)
How do you perform functions on faces, edges, points and other topological entities with SDFs? Such operations a necessary for parametric CAD.
Re:CAD Sketcher, free and open-source project bringing CAD l... by traverseda on Sunday February 19, 2023 @10:40AM (#34858464)
At the moment you don't. What I'm suggesting is that you could build up a conventional BREP-based datastructure, and than use SDF to "render" it. This gives you a very clear separation between your data structure and your meshing algorithm, and as I understand it a big chunk of those "100 man years" would be in dealing with the meshing algorithm and edge cases in it.

I suspect that having a generic meshing algorithm that will always mesh your datastructure with no edge cases would significantly reduce the time needed to implement a CAD kernel. You just need an algorithm that can tell you if a given point is inside or outside of your BREP. All you really need for that is a surface that points at a given direction, and the ability to tell whether a point is under the surface or not. Define your surfaces as BREP, render them using SDF, only have to write one meshing algorithm.

That being said I disagree with your definition for parametric CAD. Mostly the name, I get that you're talking about BREP based CAD. That is one way to do parametric CAD, but CSG can also work, especially if you can do more advanced operations like a filleted difference or union, or blends between two shapes, or other advanced CSG operations. I don't think that CSG-based CAD is inherently worse as long as you've got the ability to do things like fillet/chamfer CSG operations.

Re:CAD Sketcher, free and open-source project bringing CAD l... by virtualritz on Sunday February 19, 2023 @10:43AM (#34858484)
I would contest they are generally necessary. Applications of parametric CAD are many. Can a jeweller designing a parametric ring do without them? Probably.

That said, you can e.g. calculate derivatives of the SDF and, simply speaking, when they 'flip' you know you found an edge or corner. You can project onto the SDF along a plane or line and 'record' the intersection, use it as input in your model etc.

Similarly, you can treat an area bounded by such edges as a face etc.

Just because there is nothing out there yet doesn't mean it can't be done.

I also predict a great future for SDF based CAD for the simple reason that manufacturing methods mostly used for prototyping now (3D printing) will become more common for final pieces.

And there is no need for an explicit representation (higher order surfaces or polygon meshes) of the shape to get tool paths (often derived from 2D bitmap slices) for these methods.

Re:CAD Sketcher, free and open-source project bringing CAD l... by gene-h on Sunday February 19, 2023 @03:53PM (#34861751)
One thing that probably won't change is the need for things which we design to be made of multiple parts which must be assembled together. For any serious application this requires specifying geometric dimensioning and tolerancing information, which ideally should be tied to the topological entities in question.

I'd argue that this information is becoming even more important with the rise of 3d printing and other digital manufacturing tools. If this information can be included in the CAD data, the manufacturing tool might automatically determine how best to manufacture the part to meet the required tolerances.

Topological information is also useful for analysis. We may wish to apply a load or boundary condition only on a face.

Re:CAD Sketcher, free and open-source project bringing CAD l... by elcritch on Sunday February 19, 2023 @02:13PM (#34860770)
Why is BREP so challenging? I hear these sort of statements a lot. But often they turn out complicated as much because it’s a crusty code base built on hacks of hacks. What am I missing?

SDF do seem like a cool option. They’re computationally expensive but I’d bet the ray tracing features coming out in GPUs would help with that.

Re:CAD Sketcher, free and open-source project bringing CAD l... by traverseda on Sunday February 19, 2023 @02:51PM (#34861136)
I do think 100 man years is an exaggeration, or maybe they're talking about fully reverse engineering an existing CAD kernel and all the weird proprietary extensions it supports.

In my uninformed opinion working with meshes is hard. In the interest of comparing apples to apples I'll compare a CSG-based approach (joining two mesh objects together) with an SDF-based approach (joining to SDF objects together).

If you want to merge two mesh spheres together you need to do a lot of work. First you need some way of telling whether a point is inside or outside of another mesh. This is because you need to be able to delete all the vertexes/points/faces that are inside the other mesh. So you do that, and you delete all the points/vertexes/faces that are colliding with the insides of another object. Then you need to stitch the two meshes together. This is a whole thing, you need to find the boundary where the two meshes would have collided, create a bunch of new edges along that path while also taking into account where the existing faces on both objects are going to be.

There's a lot that can go wrong during this as well, it's possible for your geometry to be "non-manifold" which means it has no clear inside or outside, and it's really easy to accidentally make an object non-manifold when you're stitching it together with another object. There are issues where sometimes meshes look alright but in reality there are two edges on top of each other, or a face with zero area, or all kinds of crazy stuff. Making a tool that can reliably stitch two meshes together is a pretty big challenge. Than you start talking about adding fillets to vertexes, and how that affects the mesh geometry of other attached faces, and you're having to write some really complicated error prone code for N different combinations of situations. Like what if the chamfer abuts another chamfer? What if it abuts a spheroid? A bunch of edge cases (heh) depending on the faces that your edge butts up against.

With SDFs you just check if the point is inside one object or the other, and than re-generate the mesh from scratch. You write one not-too-difficult mesh algorithm and everything else is basically just OR/XOR/AND-ing things together. It makes defining geometry geometry about as simple as possible, just write a function that can say whether a point is inside your geometry or not. Something you need to be able to do for mesh based CSG anyway, but with a bunch more complications.

This is also why tools like openscad can't do fillet/chamfer joins after 10 years and the tool I threw together in a few weeks can.

https://github.com/traverseda/PySdfScad

Re:CAD Sketcher, free and open-source project bringing CAD l... by carterschonwald on Sunday February 19, 2023 @03:02PM (#34861247)
Sdf based approaches are just so much better! Agreed.
Re:CAD Sketcher, free and open-source project bringing CAD l... by phkahler on Sunday February 19, 2023 @05:16PM (#34862412)
How do you apply geometric constraints to SDFs?
Re:CAD Sketcher, free and open-source project bringing CAD l... by traverseda on Sunday February 19, 2023 @05:30PM (#34862535)
Excited to see you here!

One approach would be to construct one solid SDF object out of a bunch of 2D SDF object segements: https://iquilezles.org/articles/distfunctions2d/

The "Parabola Segment - exact" and "Polygon - exact" examples in particular. Probably requires some combination of the two for your use case. Basically turn your lines into 2D SDF objects that define the outside of your object.

I think most of those objects actually could be chained together, like the actual quadratic bezier example has a real interior and exterior when you look at it more closely: https://www.shadertoy.com/view/MlKcDD

So yeah, the intersection of a bunch of line segment SDFs like that could do it. Not sure about the performance...

Re:CAD Sketcher, free and open-source project bringing CAD l... by carterschonwald on Tuesday February 21, 2023 @12:57PM (#34884351)
Oh cool, I’ve used solve space a few times.

My personal idea for how I’d engineer for that is to reframe the problem as “the geometry is a program in a programming language”, and have ways to calculate surface Normals, derivatives, etc.

But you are absolutely correct that choice of representation / data structure makes a huge difference in what’s easy to calculate. And perhaps the best approach would be to internally have tools that can map between different data structure representations based on the calculations on the calculation at hand

Re:CAD Sketcher, free and open-source project bringing CAD l... by bruckie on Sunday February 19, 2023 @06:41PM (#34863078)
> I've seen people quote a good modern CAD kernal as a 100 man year project.

Where Fabrice Bellard when you need him? :)

Re:CAD Sketcher, free and open-source project bringing CAD l... by atonalfreerider on Sunday February 19, 2023 @09:47AM (#34857988)
I think you mean Onshape, not OnSpace

Onshape is an amazing tool. Can't recommend it enough

Re:CAD Sketcher, free and open-source project bringing CAD l... by s1mon on Sunday February 19, 2023 @10:50AM (#34858570)
Nick Kallen has been working on an BREP based CAD tool with the sort of ease of modeling that things like Blender has. Originally it was based on C3D, but he switched halfway through to Parasolid.[0] It’s amazing the amount of features he has built considering it’s a one person project. It’s worth going through his progress report videos.[1]

[0] https://youtu.be/WvwiH1DOK1M

[1] https://youtube.com/@nickkallen1

Re:CAD Sketcher, free and open-source project bringing CAD l... by Svenstaro on Sunday February 19, 2023 @10:51AM (#34858572)
I think some interesting developments are made in that sector in the form of https://github.com/hannobraun/Fornjot and https://github.com/ricosjp/truck. Let's see whether one of those will actually get anywhere near a usable level. Fornjot in particular is shaping up really well.
Re:CAD Sketcher, free and open-source project bringing CAD l... by Vespasian on Sunday February 19, 2023 @11:58AM (#34859339)
Interesting projects, Thanks for the links.

As you say it's to early to judge but I like that the Fornjot author publishes regular updates on his progress.

Re:CAD Sketcher, free and open-source project bringing CAD l... by VyseofArcadia on Sunday February 19, 2023 @11:02AM (#34858687)
> Opening up Parasolid for "free" open source and small commercial operations

I've used Parasolid in a previous job. OpenCascade may be unstable and limited, but Parasolid can be too depending on your use case. Its not a silver bullet.

Re:CAD Sketcher, free and open-source project bringing CAD l... by wizzledonker on Sunday February 19, 2023 @07:57PM (#34863680)
A agree with this 100%, I have used OpenCascade and Parasolid in the past. With the recent OCCT development trajectory, I'd hesitate to recommend one over the other on the geometry kernel alone. Also people often forget OpenCascade includes an entire visualisation module that FreeCAD doesn't even make use of...
Re:CAD Sketcher, free and open-source project bringing CAD l... by eternityforest on Sunday February 19, 2023 @12:02PM (#34859409)
Is there anything that can be done with GPUs being so fast to trade computer time for developer time? Like, would a point cloud or some other approximation be easier to work with?
Re:CAD Sketcher, free and open-source project bringing CAD l... by traverseda on Sunday February 19, 2023 @12:31PM (#34859723)
Yes! You've pretty much hit the nail on the head with your point cloud description, that's what the signed-distance-functions I was talking about basically are. You build a mathematical function that says whether a given point is inside or outside of your object and then you sample it a bunch of times and build a mesh based on that.

Works quite well on modern CPUs, works very well on modern GPUs. The library I linked to uses numpy and numpy is fast on CPU, but a newer tool like jax would let you run pretty similar code on the GPU even faster. All this machine learning stuff actually makes python a very good choice for complicated numerical stuff like CAD.

You still need to turn your SDF/point-cloud into a mesh, but that means you only need to implement one algorithm, something like marching cubes is good enough and dual contouring is a bit more complicated but also more precise.

Re:CAD Sketcher, free and open-source project bringing CAD l... by cjbgkagh on Sunday February 19, 2023 @01:04PM (#34860098)
When I tried marching cubes and dual contouring against SDFs I ended up with a ton of performance issues that I was unable to resolve in the time I had allotted for experimenting. To get the resolution I needed I ended up with way too many triangles which used a lot of memory. I could later simplify the meshes but given the high number of initial triangles that process was quite slow. What I would like to explore (and hope that someone else does before me) would be a SDF optimized meshing algorithm that would make use of the extra distance and normal information.
Re:CAD Sketcher, free and open-source project bringing CAD l... by slavik81 on Sunday February 19, 2023 @01:44PM (#34860493)
Were you using OpenVDB? I'm not sure it solves that particular problem, but I found it to be a great library for dealing with this sort of data.
Re:CAD Sketcher, free and open-source project bringing CAD l... by cjbgkagh on Sunday February 19, 2023 @03:33PM (#34861564)
I did not, I'm away from my notes at the moment so I don't remember which libraries I used. I used a couple of different ones but not OpenVDB. Next time I try this task I'll try OpenVDB and see how far I get. Thanks for the recommendation.
Re:CAD Sketcher, free and open-source project bringing CAD l... by TaylorAlexander on Sunday February 19, 2023 @04:01PM (#34861825)
To clarify, can this method be used as a fully functional replacement to BREP for a mechanical (machine design) CAD system?

I am a robotics engineer and 100% of my work is open source (see my profile). I understand that without fully open source CAD it is hard to make fully open source machines.

If we were somehow able to rally support around a single project to create an open source CAD kernel and associated interface (perhaps built in to blender or FreeCAD to avoid building a new UI), what approach would you recommend? How long would you estimate it would take for three full time senior developers to get a useful system out?

Any thoughts are appreciated. I am at the extremely early stages in my career where I hope to learn to raise money for open source non profit hardware projects. Open source CAD is a sort of linchpin and without it we cannot succeed in quite the way we would like.

Re:CAD Sketcher, free and open-source project bringing CAD l... by traverseda on Sunday February 19, 2023 @04:26PM (#34862024)
> To clarify, can this method be used as a fully functional replacement to BREP for a mechanical (machine design) CAD system?

I think so, but there are some open problems. Also it depends on the senior people. Inigo Quilez is a world class expert in this domain, and for the most part we're copying his work, get him on board and you'll be golden.

Fundamentally it makes sense, BREP is about representing boundaries and you can definitely use SDFs to represent the area under a boundary (infinite SDFs are possible, although obviously you can't turn them in to a mesh). Enclose a volume with boundaries and you can mesh that out just fine. A bit different from CSG-based SDFs, but entirely plausible.

>what approach would you recommend?

If I was to do this I'd take the constraint solver from solvespace (same one used in this post) and start using it to generate SDFs. At that point you're already 80% of the way to your end goal.

I mean if I was personally to do this I'd start by making a system that implements everything openscad can do, try to get some funding going, and than add in a solvespace based workbench for doing 2D cad that you can import into an openscad-ish language. You can see my efforts here: https://github.com/traverseda/PySdfScad

That's tackling it from a different angle than BREP though. I think that openscad but better is a surprisingly viable thing though, especially if you use it to do things like generate the gears/screws/whatever you import into your BREP based CAD project. Use scriptable CAD as the underpinning for more advances CAD.

> How long would you estimate it would take for three full time senior developers to get a useful system out?

Well define "useful"? Honestly I think you can get 80% done in under a month. I built the first pysdfscad in a week or two and replicated 80% of openscad's features. Fogleman built the library I used for pysdfscad in under a month.

I'd expect something pretty good in under a year at that kind of rate. There would be some outstanding problems, like it would be a challenge to figure out how to apply a fillet/chamfer to an edge, but not an insurmountable challenge. Geometry import is another place where you're going to spend a lot of time/money but is very important.

So let's say two or three years with three very competent seniors working on it to get a pretty good CAD program, with a GUI.

Re:CAD Sketcher, free and open-source project bringing CAD l... by TaylorAlexander on Sunday February 19, 2023 @06:31PM (#34863008)
Thank you for this. It is encouraging that something like this could be done for under $1 million. I’m just dreaming right now but I think open source mechanical CAD is one of the low level pieces that could touch billions of lives.

It would be cool to put together some kind of foundation, with a working group and some kind of RFC process, to build a concrete plan which could then be used for fundraising.

Re:CAD Sketcher, free and open-source project bringing CAD l... by traverseda on Sunday February 19, 2023 @07:00PM (#34863262)
It definitely would, yeah. I think the SDF stuff will come to fruit eventually. There's also Matt Keeter's libfive-studio available and I saw a solvespace maintainer in this thread asking about it. I think the open source community is getting skilled up for it.
[dead]
Re:CAD Sketcher, free and open-source project bringing CAD l... by TaylorAlexander on Monday February 20, 2023 @08:22PM (#34875264)
That’s a good point. I am planning on following up with them soon about another project I am working on. I will see if there is any room to ask about this.
Re:CAD Sketcher, free and open-source project bringing CAD l... by douglee650 on Sunday February 19, 2023 @01:11PM (#34860174)
The purpose is "CAD-like" -- that is, parametric surface modeling operations on polygonal geometry.

Blender has its purposes, but I think surface or solid CAD must be pretty far down the roadmap. But there are often times where BREP or NURBS type workflows would be quite useful, and also some modeling operations such as "extend geometry from object A based on object B's coordinates and normals" can be very useful.

If you need operations like variable radius fillets on tapered multiple intersections with G3 continuity—this is probably not for that. But selecting the midpoint edge of some other object and offsetting a plane by some radius? This makes that sooooo much easier.

Re:CAD Sketcher, free and open-source project bringing CAD l... by app4soft on Sunday February 19, 2023 @08:27PM (#34863885)
> The purpose is "CAD-like" -- that is, parametric surface modeling operations on polygonal geometry.

> Blender has its purposes, but I think surface or solid CAD must be pretty far down the roadmap.

As a workaround, here is a free "Export IGES" addon for Blender, which could convert polygonal model into solid/surface CAD file format.

[0] https://www.digital-sculptors.com/cms/index.php/software/ble...

[1] https://blenderartists.org/t/blender-add-on-export-to-iges/1...

Re:CAD Sketcher, free and open-source project bringing CAD l... by IshKebab on Sunday February 19, 2023 @04:10PM (#34861902)
SolveSpace's kernel seems rock solid to me. It just doesn't support fillets or bevels. :/

I guess fillets are probably one of the most complex things for a CAD tool to support.

Re:CAD Sketcher, free and open-source project bringing CAD l... by phkahler on Sunday February 19, 2023 @05:22PM (#34862476)
>> SolveSpace's kernel seems rock solid to me. It just doesn't support fillets or bevels.

Sorry, I work on Solvespace and can confirm it has some serious NURBS bugs. There are several open issues on github relating to NURBS boolean failures. The problems seem to fall into 4 or 5 categories, and we can probably fix some of the common ones. It's going to take time and some deep dives into the code though.

Re:CAD Sketcher, free and open-source project bringing CAD l... by IshKebab on Tuesday February 21, 2023 @07:45AM (#34880480)
Ah that's a shame. Maybe I've just been lucky then.
Re:CAD Sketcher, free and open-source project bringing CAD l... by app4soft on Sunday February 19, 2023 @08:20PM (#34863837)
> SolveSpace's kernel seems rock solid to me. It just doesn't support fillets or bevels. :/

(For not too complex shapes) Its possible to create Fillets/Chamfers in SolvSpace by "by hands".[0,1,2,3,4,5]

[0] https://fosstodon.org/@app4soft/109740222184364152

[1] https://github.com/Symbian9/SolveSpace-Daily-Engineering/iss...

[2] https://twitter.com/app4soft/status/1423871556397244421

[3] https://fosstodon.org/@app4soft/109812747058078617

[4] https://fosstodon.org/@app4soft/109740732713730578

[5] https://fosstodon.org/@app4soft/109834024415938501

Re:CAD Sketcher, free and open-source project bringing CAD l... by vba616 on Sunday February 19, 2023 @05:13PM (#34862391)
>no realistic future prospects

Why? I've gotten far enough with FreeCAD despite its annoyances that I would be tempted to look into solving the problems with the kernel, and here you are discouraging people like me from getting involved by saying it's hopeless.

The culture of constantly losing interest and starting over in many areas of software is one of the things I dislike the most.

But I don't fight the tide.

Re:CAD Sketcher, free and open-source project bringing CAD l... by imtringued on Monday February 20, 2023 @02:01AM (#34865746)
I don't even think that the biggest problems have anything to do with the geometry kernel. The entire UI in general could be overhauled without touching the kernel and it would make the difference between highly usable and productive CAD program with some limitations vs incomprehensible mess.
Re:CAD Sketcher, free and open-source project bringing CAD l... by ezst on Monday February 20, 2023 @08:58AM (#34868106)
Not OP, but that sounds unnecessarily harsh. FreeCAD is much more approachable now than it was few years ago. It's definitely far from perfect, but it's getting substantially better and we should collectively encourage that.

I also realized during that time that my distro was doing a poor job at packaging it to make it work as designed (and I can't fault the packagers for that, it's a highly specialized/niche application after all). The flatpak version seem much more cohesive.

If one thing, I'm amazed by how much one can accomplish with FreeCAD given a little patience and perseverance: it brings parametric CAD, drawing projections FEM… to the masses, which, when I was learning that stuff as part of my curriculum, was completely out of reach of most universities, let alone the hobbyist scene.

It's an under-appreciated, fundamental, piece of software if you ask me.

Re:CAD Sketcher, free and open-source project bringing CAD l... by vba616 on Monday February 20, 2023 @11:47PM (#34876727)
FreeCAD, for me, has been extremely frustrating, but it has convinced me, coming from OpenSCAD and not a regular CAD background, that a constraint solver and features like fillets or the curves workbench are really things I was missing and didn't know it.

FEA is tantalizing, but I haven't been able to accomplish much yet.

Re:CAD Sketcher, free and open-source project bringing CAD l... by vba616 on Tuesday February 21, 2023 @01:31AM (#34877490)
A significant part of the "incomprehensible mess" seems to be that errors from the kernel have no context. If you ask in a forum, people just kind of shrug. It's not clear on which side the bug really is in such a situation.
Re:CAD Sketcher, free and open-source project bringing CAD l... by Syntonicles on Sunday February 19, 2023 @07:55PM (#34863661)
I spent the past 2 years working in AutoCAD and was surprised to find that it really hasn't changed much in the past 20+ years, other than some simple UI changes. I ported over 100,000+ lines of Lisp from the mid 90s and it worked almost without modification though I did rewrite it for other reasons.

That project has come to an end prematurely. Is there a real future in CAD programming? I feel like I've wasted a good chunk of my life on a dead language in a dead product. Is any of this knowledge portable?

Re:CAD Sketcher, free and open-source project bringing CAD l... by simonbarker87 on Monday February 20, 2023 @04:08AM (#34866418)
I might have some consulting work for you check my profile and ping me an email
Re:CAD Sketcher, free and open-source project bringing CAD l... by WillAdams on Sunday February 19, 2023 @09:16PM (#34864221)
The Fornjot folks are working on a new kernel:

https://fornjot.app/

Re:CAD Sketcher, free and open-source project bringing CAD l... by virtualritz on Monday February 20, 2023 @05:58AM (#34867027)
There are two Rust projects working on parametric kernels I'm aware of.

The first one, Truck[1] seems to have a company behind it, Ricos Ltd, that look like they to know what they're doing[2]. The tweet shows their product using functionality from Truck (the frontend is not OSS AFAIK).

Fornjot is an ambitious project IMHO. Their kernel is in a separate crate[3].

As for OSS code that could be a good base to either use (or port to something like Rust) for someone to write their own kernel is Ayam [4], the oldest OSS 3D NURBS modeler that is still being developed.

[1] https://github.com/ricosjp/truck

[2] https://twitter.com/RICOS_ltd/status/1550390552482693120

[3] https://crates.io/crates/fj-kernel

[4] https://ayam.sourceforge.net/

Re:CAD Sketcher, free and open-source project bringing CAD l... by rjsw on Monday February 20, 2023 @12:06PM (#34870109)
Siemens is trying to make the Parasolid file format into an ISO standard. I have input into how my country votes on this.

I suggested that I might support this if Parasolid was made open source, dual licence it as commercial and AGPL, got nowhere with the project leader who is being paid by Siemens.