Re:AirGradient Open Source Air Quality Monitor for CO2 and P...
by runjake on Sunday January 29, 2023 @08:55PM
(#34574956)
Am I confused? I have the pre-soldered kit, but the OLED display is on the bottom-right, not the upper-left.
I will try to track down a 2.4A power supply, thanks.
Re:AirGradient Open Source Air Quality Monitor for CO2 and P...
by ahaucnx on Sunday January 29, 2023 @09:25PM
(#34575143)
You might have already gotten the new kit. Can you please contact us at https://www.airgradient.com/support/ and let us know your order number.
It should be easy to fix.
Re:AirGradient Open Source Air Quality Monitor for CO2 and P...
by runjake on Monday January 30, 2023 @04:38PM
(#34586792)
I was able to flash the non-presoldered image on my new Pre-soldered unit and it works great now and displays properly.
I did not have a 2.4A USB power supply handy, so I'm still using an old 1A iPhone USB charger and it works fine with the AG across the house from my WAP.
Re:AirGradient Open Source Air Quality Monitor for CO2 and P...
by fragmede on Monday January 30, 2023 @01:10PM
(#34583915)
> Please use at least 2.4A power supply.
Oof. IMO unless the board only needs 500mA at 5V, you'll save yourself a ton of money in customer service calls by providing your own power supply and "requiring" customers to use yours.
If the text is upside down, you flashed from the wrong build instructions. For the PRO Kit (OLED bottom right) use [1] for PRO Presoldered (OLED top left) use [2]
The reason we had the display on two different location can be found here [3]. From now onwards we will only have display windows on the bottom right.
Please use at least 2.4A power supply. The WiFi issues could be due to that.
[1] https://www.airgradient.com/open-airgradient/instructions/di...
[2] https://www.airgradient.com/open-airgradient/instructions/di...
[3] https://www.airgradient.com/open-airgradient/blog/diy-pro-ki...