"The toxicity tests showed that PLA particles were more toxic than the ABS particles on a per-particle comparison, but because the printers emitted so much more of the ABS"
so, not just ABS
But I would be very scientifically comfortable that ANY plastic brought at or above its glass transition state is going to outgas toxic materials. And that includes PLA, ABS, HIPS, polycarbonate, PETG, PET, ASA, and more. And printing is usually quite a bit above tg. Higher temp = more nastiness.
That's why my 3d printers are in my workshop, separated from our house. And they are also enclosed printers, so I'm less worried of particulate exposure. But again, anybody starting off early in 3d printing knew this was a definite threat and a concern.
And yes, we have known since forever that it is highly toxic. It's also common on your organism, on much higher concentrations than you will get from your printer.
Anyway, the common advice applies. If you get a 3D printer, use it on ventilated spaces, and if you will print with anything that isn't PLA, make sure it is well ventilated and doesn't ventilate into anybody. What really surprised me was this:
> these tests indicate that exposure to these filament particles could over time be as toxic as the air in an urban environment
I expected it to be much worse. Printing ABS does surely not smell like an urban environment. I guess a 3D printer generates much fewer silent poisons than a city.
I have been in injection molding plants and the smell isn't pleasant. Melted/burning plastic odors fill the air along with hydraulic fluid and other oils and grease from the machinery.
You can also enclose the printer. For example, the ender3 pro has a box bag that you can put the printer in. Solves the problem.
My custom printer has the activated carbon airfilter/fan. Its probably overboard, but I did have that in my workspace for a while, so it was worthwhile for the time. I have no good metric when the filters should be replaced... I don't know any way to monitor particulate load in a filter.
Any ideas if having this enclosed printer in my office is a real danger?
You could also get a pm10 and pm2.5 air quality monitor for a more scientific measurement. Gasses won't trigger those, depending on what they are.. I guess you could make a forced air device with 20 sensors in it, but nothing on the market is like that.
As for limited exposure, it's probably not too bad. But uncovered in bedroom... Whole different story.
Even that isn't close to being enough to filter it all out and I'd certainly not stay in the room for any length of time whilst it was printing.
The current hot new printer is the Bambu Lab X1. It's aimed at consumers and is capable of printing things like Carbon Fiber Nylon, Polycarbonate and Thermoplastic polyurethane (TPU). These are far more volatile than run of the mill PLA and theres less studies available on their long term effects so take as many precautions as possible should be the message.
For most hobbyists PLA is the vast majority of their print time and it's a shame that we don't even have convenient and affordable systems to mitigate the risks of the baseline material (I don't consider cobbling together your own enclosure, ducting, and filter system convenient. As we have seen with open frame laser engravers, most consumers won't bother).
The worry is that people think "its got a filter built in, its fine" when its not even close to being true.
Same discussion, from 2015 - https://3dprintingindustry.com/news/toxic-abs-pla-fumes-3dsa...
And in 3d printing groups, it was common to hear people say "ABS smells like cancer". Sure, anecdotes aren't evidence proper, but the science certainly bears this claim.
Edit: And to add my own anecdote, I have a large format high temp printer. It is capable of printing stuff like ultem (375c tip, 220c bed). It is enclosed with a activated carbon filter/fan for airflow. But one time when printing polycarbonate, I took a .5w green laser to the print area. When it was shining near the print interface, I could see ALL SORTS of stuff being flung at high speed away from the nozzle. Lets just say I was glad I have that machine fully enclosed.