I actually had this debate at work a few years ago. We needed a queue system and I wrote a postgres prototype in about 100 lines of code that would have worked fine for our use-case and would have likely scaled with us for years of growth.

My boss said he just wanted to install the best thing and be done with it forever. So we ended up spending 10x the time and wrote like 10x the code to integrate a third-party solution and we only ended up using the most basic features. Not to mention additional infrastructure.

People underestimate how bad databases are at implementing queuing systems. I’ve helped replace such systems multiple times.

But it doesn’t need to require 10x the time or code. That just sounds like overengineering. Database-as-queue vs. 10x ultimate solution is a false dichotomy.

People overestimate their requirements, because almost nobody had ANY idea what computers are capable of, and that big tech is HUUUUGE compared to the rest.

You are not Google and you are not Steve Jobs

Yeah they suck at it. There are so many good queuing systems, and if you’re on any cloud there’s gunna be a cheap managed queue that is super reliable and near zero effort. If you get beyond trivial scale just use a managed queue.

> how bad databases are at implementing queuing systems.

What difficulties did you meet?

I think there exists a midway, where you rely on the heavily-tested open source solution that implements what you want, and a sprinkle more. RabbitMQ for example is that layer that your 40 lines of code would do, but pays off dividends in good nights' sleep.

RabbitMQ is not free. You need to learn it, configure it, understand it, interface towards it, install it, upgrade it. Lots and lots of things.

So those 1000 lines of code (your prototype was 100 lines and this was 10x that) would still have been a week tops, right? That doesn't seem too bad a price to pay for scaling potential, even if in hindsight it wasn't needed. You can't always know in advance which features you are going to need and which ones are superfluous.

If what you need is a simple work queue, you really need to scale very far away (in the magnitude of several thousands of requests per second) to overgrow a solution built on top of PostgreSQL.

In other words: boss has no idea, boss doesn’t trust your technical nor business skills

Conclusion: abandon this company.. you’re probably just a cost center and nagging headache in his eyes. If you’re not valued or respected, there’s only way way up, and that’s out

It takes effectively zero effort to maintain my redis instance in AWS, so I’m not sure you’ve got a real argument here…

This is all fine and dandy but the article has a great point here. Redis is absolutely amazing, but if you bring it in you have to care about more stuff. Mo' stuff, mo' problems as they say. You now need to synchronize writes between your Redis and your DB (hello "after_commit" hooks and similar, how is your read-after-write doing?). You need to install metrics for Redis (lest you find that suddenly your application spends a huge amount of time in MGETs or blocks on set operations). You need to have good failover in place at AWS and make sure you do not save anything non-transient into it – yes, this is how Redis is supposed to be used for transient stuff, but are you positive your application can cold-start well enough with a blank Redis? Oh, and now everyone on the team needs to run a Redis locally, and a matching version at that - hello docker-compose...

Brief: yes, a specific datastore is usually better fit for the job, except that until your app requires more performance than Postgres can deliver if you already _have_ Postgres you might as well just stick to it.

Same for SQS - SQS is incredibly performant, but there is a whole lot of features it does not have which a PG-based queue system like good_job will give you out of the box. Just off the top of my head - priorities, separate queues, scheduling - and, do not forget, atomicity with your main transactional workload.

So while it is usually - when everything works great and the workload fits - not a big deal to run a specialized store, it can be more economical and simpler to just stuff everything into the DB until you outgrow that.

> Mo' stuff, mo' problems as they say.

This is basically not true, is my point. There is no meaningful "problem" with throwing up a Redis instance in AWS, this just doesn't mesh with my experienced reality.

Speaking from experience, you can get away with not understanding Redis for a while. Then one day you'll wake up and everything will be on fire, because you used Redis wrong, and now your main and replica are in a death spiral DoS'ing each other trying to pass a 1TB replication log back and forth.

You don't need to learn your tools for doing simple stuff under normal circumstances. You need to learn them to do bespoke surgery on live data while everything is on fire and the customers are threatening to fire your company. Or better yet, so that you can avoid doing that altogether by anticipating limitations during design.

That being said, doing everything in Postgres is also going to bite you if you have moderate scale. This is really the same mistake again. Postgres looks like a big truck you can just load up and load up, until you wake up one day and there are cascading failures across all services that touch that database, because you wrote a dumb query that took a lock for 5 entire minutes while it did an HTTP request. It's robustness will lull you into thinking something is working well when it's actually barely working.

(Before you object, yes, it is a better idea not to have multiple services talk to the same database, I hear you. And no, you shouldn't ever hold a database lock while doing an HTTP request, believe me I know. These things can happen.)

Er, I really feel like you’re not understanding how simple AWS makes managing a Redis instance.

I’ve been using Redis for nearly 10 years and it’s been a seamless and pleasant experience. Honestly it sounds like you’re taking your specific experiences and overgeneralizing.

Partly I'm sharing war stories because that's a fun thing to do, I'm not being entirely serious. Partly it's that you said that wasn't your experience of reality, so I broke off a little piece of mine and offered it to you. I'd suggest we're both generalizing, and as long as it's not taken too seriously, that's fine; it's how shop talk works.

I don't know the nature of the applications you've been working on those last 10 years, but it was more or less the main database for a high bandwidth, low latency service I was working on, also using Elasticache.

Problem spaces vary. If you're using it as a cache with modest load and consistency requirements, maybe you never need to understand it. But those sorts of requirements often creep & change out from under you.

So if you're saying, Elasticache did a good job of abstracting Redis, sure, I agree. If you're saying, there is no additional cognitive load to adopting a new service in your data path, because you don't even need to understand it - that puts a shiver up my spine, and makes me hear Pagerduty alerts in my head.

Keep in mind the context of this thread. It's some shitty blog suggesting you do every fuck thing on postgres. Myself and the other guy are simply suggesting that running a single-node instance of redis is an infinitely better and simpler choice than implementing a cache or a job queue on a rdbms.

I don't feel designing for a guaranteed high-availability application was part of the discussion at all.

If you don't find it applicable, feel free to discard what I'm saying, I take no offense. But I just don't quite understand your perspective. Maybe I have oncall firefighter brain rot, but a distributed job queue is exactly the sort of thing I'd want to be available, and a cache is something I regard as being very dangerous and requiring utmost care.

You use SQS, couple clicks and you’re done. You shouldn’t be using a cache for a queue. You use a queue for a queue.

Yes, mostly. There are a few things to take into account though:

- No multiple queues - No priorities - Practically no scheduling (the delay is very limited) - Creating and tearing down a queue takes a lot of time and the number of queues is subject to AWS account limits - The FIFO/LIFO semantics (remember about no priorities?) will bite you when you least expect

It does have great durability unlike Redis though and will scale to much, much larger queues in an easier way.

Redis isn’t just a cache. That’s memcached. Also SQS absolutely sucks for a job queue as soon as you want to do anything like control concurrency or have job priorities, but if your needs are simply “I need a background job queue” then SQS is likely a great choice.

Not disagreeing, but purely for interest, Redis contains a queue-like primitive.

https://redis.io/docs/data-types/streams/

You can make good job queues out of this, combined with sharding or consistent hashing, for low(ish) latency applications. Each shard has a stream, they operate on data stored in Redis, and you pass them the key to this data over their stream.

But SQS is great, and a great rebuttal to the article. Totally easier to prototype a job queue that way than with pg, and you probably won't need to move off of it.

I have used both SQS and PG-based queues and for the smaller workloads/smaller systems (read: "not very very large systems") I now prefer the latter. There is also a non-trivial amount of stuff that we turned out to need for operating SQS at scale on the application side, basically to compensate for the things SQS does not have. It is great it doesn't have those things, but if you have a smaller application you might want to have those things instead and sacrifice a bit of scalability.

The advantage being that you could sort things to implement priorities and such? Did you use listen()/notify() at all?

ETA: seeing your list of missing features now, that all makes a lot of sense. In my mind the biggest advantage of SQS is that it glues together all the other AWS offerings, so you can go AWS -> Lambda for an instant job queue (with concurrency limits, etc. so you don't blow your hand off - perhaps undermining the simplicity argument). But everything you're saying makes sense if your job queue needs any degree of sophistication.

Sure, but you still need to run redis vs click a couple of buttons and create a queue, offloading the entire management to AWS staff.

Chiming in to concur. Redis is amazing and simple software. You can use a managed service like Elasticache or install the binary on a VM instance. Folks using a relational database for a job queue or a cache when an infinitely simpler and more appropriate tool is available are just making poor technical decisions.

But it's not simpler when you consider all the things you've got to do around and after installing that binary on a VM instance. Consider the overhead of managing it - monitoring it, updating it.

Failover when the node dies. Clustering for high availability?

Backups? For a cache, probably not, for a job queue broker, probably necessary.

Making sure your app deals with inserting into Redis on successful transactions and not when a transaction is rolled back.

Getting up and running can be fairly painless, staying running on all edge cases and handling partial failures is what gets you.

I’m confused the scenario you have where a) a singular postgres install which does everything is acceptable vs b) as soon as redis comes into the picture, suddenly you need HA and monitoring and apparently running transactions with full ACID integrity?

It’s just a nonsensical and unfair comparison. You can run a single Redis instance with normal rdb disk syncs and don’t ever update it for years on end without issue. Is that guaranteed resilient? Absolutely not, but that’s not the scenario in discussion. We’re talking about the context of a bootstrap/MVP scenario, not an enterprise setup.

I’d take a single-node redis job queue everytime over a HA citus/postgres cluster improperly acting as a queue.

I think the point is they have a Postgres server running anyway as the datastore and the job queue being in Postgres gives you HA, backup and Transaction for free. I think Redis in particular won't give you transaction right?

Needing Transactional semantics for jobs alongside an application operation makes a lot of simpler queue/tool choices difficult.

Thank you for the nuanced assessment, I would tend to disagree still.

I agree with the OP's point of the overhead of adding more things to maintain.

For Redis though, the overhead is far more trivial than something like Kubernetes or Kafka, or even Elasticsearch or MongoDB

The overhead is actually the conversation we're having right now about whether postgres or Redis is better. It's not that postgres is hard to use or less perfomant, but that there's memory overhead in "Here's how you use Postgres for session management, here's how you use it for application building". Use Redis for this, Postgres for that is easier to grok.

That's not the scenario they're describing, postgres has most likely already been designed and worked on to scale to their workload, using postgres means you don't have to replicate that for another system.

As long as it works the first time and everyone on the team is fine installing a local Redis - there is very little problem. If the code doesn't make assumptions about read-after-write consistency for jobs. There will be "problems" (or - rather - things you will find out you haven't accounted for) when, for example, an improper URL is used and your Redis fails over. Or you do not have a replica configured (someone decided to "let's save some budget of team XYZ and is this really necessary it is transient after all"). Or you started using something that saturates your Redis. Or that you haven't configured alerting on Redis metrics...

It's all normal stuff, by a long shot not the end of the world, but it is stuff that you need to do, and it is more stuff, and it can bite you if you come unprepared and "just clicked a few instances into existence last year".

Every added service also gets multiplied by the number of environments you need. Sure, prod is just one. But you need a staging env too. And CI needs the service to run the tests. And you probably want a feature-branch environment. And local development of course. It adds up and every service you add gets multiplied by the number of environments.

And each developer has their own dev env. QA’s may also run things locally.

And then there is monitoring, dealing with security issues, and upgrading.

It all multiplies.

Elsewhere people are debating whether Redis adds that much more overhead. I think they are missing the wider point. It’s about how many pieces you will have. 1 is simpler than 2. 2 is simpler than 3. 3 is simpler than 12.

Nowadays there are so many great specialized tools that do certain things really well. And for most use cases, you don’t need them. And when a time comes that you do start needed them, you add them then. And people will grumble about the idiot who implemented full text search inside of Postgres, while being completely blind about the 7 years of saved time NOT managing elasticsearch across 38 environments and quarterly upgrades.

Now you have to pay for 2 services instead of one (elasticache is not cheap), and you may need to account for two differently configured redis instances (setting it as cache store requires a different configuration than setting it as a job queue).

You'll also need to code for two integrations (orm + whatever you're using redis with), which may be a solved problem or not, depending of your stack. And even then, still more complex than just postgres, and more error prone considering you'll either have to ignore enqueue reliability, or find a complex way around it.

SaaS is nice, but you still have to worry about Redis drivers, local development set-ups, etc. And unless you can make do with AWS’ free tier, that Redis instance isn’t free.

This doesn't apply to everything. But yeah redis does what it does really well. I almost feel like I want to spin redis up before I spin a DB up. It is excellent tech. Can use it for caching. Sessions. Distributed locks (niche but when you need it it's fantastic).

But yeah I think this is more applied to the folks who decide to spin up a large service when they just need a messaging layer that their DB can solve for them. It has non insignificant cost.

Redis is pretty low maintenance tho in many configs (k8s, on a vm, or a service like on aws have all basically been zero maintenance for me).

Perhaps you’re not using it in “clever” ways, as recommended in TFA?

Those 40 lines of codes give me nightmare. What if the dev disappear and we know only the C binary, source disappeared ?

Little tiny custom stop gaps are the worst in a bit system.