Could you explain that? How do you seal pipe fittings with rope?
Edit: found an explanation. TIL that you can use the fibers just like tape and wrap the threads.
Here are some photos: https://www.bunnings.com.au/enduraseal-1m-plumbers-hemp_p012...
https://waropes.com.au/twines/plumbers-hemp/
You wrap the hemp fibers around the threads that have been brushed with linseed oil paint then apply a little more paint to the hemp and then mate the couplings together. This sealing technique has been around at least for several hundred years if not longer.
That's some hearty stuff, then!
Edit: I agree that using oil is counterproductive with water pipes—initially at least. I was taught by both plumbers and my father (who wasn't a plumber but a mechanical engineer who worked on power station boilers) that using oil is better in the long run as it prevents the hemp from rotting and thus premature failure of the seal. Moreover, using one oil-based method means that a plumber cannot get confused and leave oil off gas connections where it's essential.
Ahh, young padawan, the way of the elder is to buy a roll every time you have a project to do until you have achieved saturation...where there is a lightly used roll of teflon tape in every drawer and on every surface of your workshop and garage.
I've figured out the problem: my mind is thinking about all sorts of seemingly important stuff all the time but which in fact is mostly garbage, so my subconscious mind handles what my conscious mind consideres as procedural or unimportant. As my conscious and subconscious minds aren't on speaking terms sufficient for my liking I often end up with the problem of lost stuff.
If I consciously tell myself where I've put something then I very rarely forget where it is. The trouble is I don't remind myself to make note often enough.
I know I have too many diverse interests—fields of endeavor to quote you—and the older I get the more of them I accumulate. On the one hand having many interests is very useful because it allows me to see and understand common ideas or threads across quite disparate and diverse subjects that otherwise would not have been obvious but the matter of administration becomes a significant problem. Often I've little time to deal with prosaic matters so the mundane is often left to itself (disorder accumulates).
That said, I'm instinctively an orderly and tidy person, as I like to say 'there's a place for everything and everything in its place'. I hate mess and disorder but that doesn't mean that I don't experience it—I do so often for reasons that you mention. However, when entropy/disorder around me reaches a certain 'sensibility' threshold I'm triggered to have an almighty cleanup much to the chagrin of others around who have a more relaxed view of disorder.
Nevertheless, I'm not obsessive about it, sometimes I amaze myself at the level of disorder I'll tolerate. (Reordering things is boring and distracts me from my interests despite the fact that I'm competent and thorough about it. Essentially, the more preoccupied I am with something the higher my toleration for mess and disorder becomes).
It’s sometimes that you can’t stop focusing on something, even if you want to, or need to for your own health (like drinking water, or getting up and walking around tk stretch).
Hyper focus is the term.
It's not only PTFE tape that I spread around in copious quantities, other notables on the list are screwdrivers (of various sizes and types), superglue tubes (they go off with age anyway), propelling pencil leads, keys, USB and computer cables, USB pen drives, computer mice, adhesive tape, remote controls and any number of useful things.
The trouble is these supposedly inanimate objects come to life in the middle of the night and conspire not to be available when I most need them. Then the moment I've made do by jerry-built means they suddenly reappear! ;-)
Also on my list of buy too many so I’m never left without: sharpies, microfiber cloths, jumper cables, rice (carbs), frozen sliced sourdough (fancy carbs), pocketable protein/energy bars.
At least it's nice that one can now purchase them in packs of a dozen or so.
If you were to read some of my old HN comments you'll realize defending the metric system in a US environment is pretty much a waste of time.
I recall one debate where some US commentators didn't have a clue about what a comfortable room temperature in Celsius would be. 68F=20C was meaningless to them even though 20C is a standard calibration temperature in lab and scientific work.
Not worth raising the issue.
I do find it annoying that one country in the world likes to use it's own unit. And that of course they are not as nice to use as the units optimized for science. It is annoying for international communication.
But my real issue is that Americans seemingly lie to themselves by pretending everything can be rounded off to the nearest approximation of US customary units without consequences. And so anything you buy in the USA; unless maybe when manufactured with US customary units; is not the advertised size. Worse yet, this habit of rounding off is also applied to US customary units in many case. Because nothing is ever the advertised dimensions, or the tolerances are just laughably large. Nothing ever fits. That is what I am fighting.
Ask for a 48" long piece of lumber in the USA, you get something +- 1/4" at best (+- 6.35mm). Go to my home country asking for 1.2m will get you something +- 0.5mm. It's cultural.
I would have thought this obvious and it's essentially my experience (and I'm definitely not a plumber). However, I've found that more PTFE tape is needed on old or worn fittings or on ones that have damaged or badly cut threads—or when mating same sized pipes/fittings but each with different threads (yes, that's a desperate brute-force move in an emergency but I've had to force such matings on more than one occasion). In these circumstances, I'll use two or three turns or more often by trial and error—and this changes somewhat depending on whether I'm using thinner white PTFE tape or the thicker pink one.
Of course—not being plumber—it often happens that when I urgently need PTFE tape I cannot find it (it having been filed in some obscure place that I've forgotten about—even though I keep a reasonable stock of it), it's then I fall back to the good old combination of Hessian/burlap jute-type rope (of which there is always some lying around in my workshop) and linseed oil based paint. It's messy and much less convenient combination than PTFE tape but it still works wonderfully well. Moreover, it's more tolerant of the amount applied as the linseed oil actually binds to the pipe surface as opposed to the more 'mechanical' bond of the PTFE.