That explains it. Thanks.
Re:Wiring My Home with Fiber
by lotsofpulp on Sunday October 30, 2022 @12:45PM
(#33396018)
> You have to have a wire installed in the first place(i.e coax or just a simple thin but strong wire). That wire is installed when you install the walls/gypsum.
Unfortunately, in my experience of 6 or 7 new builds in the last 15 years or so, coaxial cables are usually staples to the studs and useless for this purpose.
Re:Wiring My Home with Fiber
by thefounder on Sunday October 30, 2022 @01:14PM
(#33396386)
>> Unfortunately, in my experience of 6 or 7 new builds in the last 15 years or so, coaxial cables are usually staples to the studs and useless for this purpose.
Well, that's part of the fun/job. Usually you end-up with a few holes as well so you try to get hold of anything that helps you, "one inch" at a time.
As always, the easy way to deal with this is to let someone else do the job(hire a pro/custom installer).
Coax stapled to the studs is different than coax running inside of a conduit.
Re:Wiring My Home with Fiber
by ComputerGuru on Sunday October 30, 2022 @02:36PM
(#33397253)
I have never seen coax running in a conduit in a residential setting in the USA.
You use two semi-stiff snake tapes with hooks on the ends. The idea is to snag the hooks.
The biggest skill is you have to hold your jaw just right when you do it. Then, itβs a piece of cake.
If you don't have an initial wire installed you can use a magnet kit with a specific wire to pull it through the conduit.(e.g youtube "magnepull"). A camera small comes in handy as well.
If you need to pull wires through the ceiling and you already have recessed lights you can use their wires to pull your new wire.