edit: here's an example: https://i.imgur.com/Ar80FYZ.jpeg
The better mirrors, which are used e.g. in telescopes and some other optical instruments, have the metal on the front side, but that limits the metal choice to aluminum, because silver is tarnished quickly by the sulfur compounds present in the air.
I do not know when aluminum has replaced silver, but it was probably not a long time after WW2.
The silver mirrors had the advantage that the metal could be easily deposited from a water solution, anyone could make silver mirrors at home, if desired.
The aluminum mirrors use a vacuum deposition process, which requires very expensive equipment, but the cost per mirror is much less.
https://materion.com/products/precision-optics/application-f...
Most dielectric coatings absorb ultraviolet light so they reflect much less of the total solar light, most likely less than 90%.
Such a mirror with dielectric coatings would not be able to cool the object on which it is applied, unlike the paints which are discussed in the article, which are based on boron nitride, barium sulfate, calcium carbonate or fluorinated polymers, all of which do not absorb ultraviolet light.
The common white paints based on titanium white or zinc white also absorb ultraviolet light, so they cannot be used for cooling an object illuminated by the Sun.
https://www.researchgate.net/figure/Reflectance-versus-wavel...
https://www.researchgate.net/figure/Reflectance-of-Ag-Au-and...
I think this better fits my observation that a clean mirror can easily be unnoticed in an environment similar in all directions, such as woodland or a messy room.
Aluminum has lower reflectivity everywhere, but it retains a high reflectivity in ultraviolet.
Silver absorbs ultraviolet, which lowers the integrated reflectivity over the complete spectrum.
A few percent difference in the total reflectivity can make a large difference in the cooling power of a paint, but a few percent difference in the reflectivity of a mirror is unlikely to be perceived visually.
Silver reflectivity is about 95%, aluminum reflectivity is about 90%.
So the best metallic mirrors are worse than the best white paints, even if they can be better than the frequently used white paints based on titanium white (89.5% reflectivity).
Total internal reflection might be closer to 100%, but that cannot be used for the light that comes from the air on the surface of a mirror.