News for hackers. Stuff that matters.
Re:Our screwdriver took three years [video] by shapefrog on Thursday September 01, 2022 @06:25AM (#32674404)
"The ratchet is based on Megapro's long-standing & reliable design, but has been significantly modified to suit our needs. We reversed the ratchet direction (right for clockwise, left for anti-clockwise), adjusted the spring for lighter back-force which allows you to ratchet-drive even very small screws, and optimized for smoothness and quiet function. It's rated for operation of up to 220 inch-pounds of force."

optimized for an extra $10.00

Re:Our screwdriver took three years [video] by throw0101c on Thursday September 01, 2022 @06:46AM (#32674547)
> optimized for an extra $10.00

Megapro may have larger economies of scale and therefore lower costs, or Megapro may have already paid off / amortized the cost of development and so felt its margins were already without having that included in the price anymore.

Re:Our screwdriver took three years [video] by brianwawok on Thursday September 01, 2022 @08:46AM (#32675544)
That’s not how a business sets prices. It charges as much as consumers are willing to pay.
Re:Our screwdriver took three years [video] by V__ on Thursday September 01, 2022 @09:33AM (#32675992)
If more people are willing to buy the product for a lower price and due to better economies of scale / amortized cost of development the margins also improve then of course they may lower the price.
Re:Our screwdriver took three years [video] by t-writescode on Thursday September 01, 2022 @02:04PM (#32680509)
Tell that to Arizona Iced Tea. Not all companies are garbage.

Friendly reminder that LTT sells *all* of its desk pads and water bottles for the same price, no matter the size.

Re:Our screwdriver took three years [video] by brianwawok on Friday September 02, 2022 @04:31PM (#32695409)
A company using basic ecomomic principles is garbage?

So LTT overcharging for it's smaller water bottles vs big is good? But if a company were to discount small water bottles, and raise the price of bigger, they are garbage?

wow.

Re:Our screwdriver took three years [video] by qbasic_forever on Thursday September 01, 2022 @10:21AM (#32676613)
Why in the world do small screws need nearly 20 ft-lbs of force? That's a level where I'd be breaking out a much larger torque wrench. I'd be shocked if the kind of small machine screws in a PC can even withstand that force.
Re:Our screwdriver took three years [video] by rocqua on Thursday September 01, 2022 @10:42AM (#32676981)
They don't. The screwdriver isn't meant for that.

Point is "adjusted the spring for lighter back-force" would normally mean the max torque you can use is reduced (because the spring slips). They state the max torque you can use to indicate the effect of the trade-off.

The fact that you think that the max torque is still way more than is needed, is probably why they advertise this. The fact that max torque is way higher than needed means they did not trade off too much max torque to reduce the back-force.

Re:Our screwdriver took three years [video] by Pxtl on Thursday September 01, 2022 @10:43AM (#32677004)
Because if somebody uses their $50 screwdriver to disassemble office furniture they don't want it to break.
Re:Our screwdriver took three years [video] by bombcar on Thursday September 01, 2022 @10:44AM (#32677008)
"Instantaneous breaking force" or whatever it is can get pretty high, especially if the screw has been there for awhile, or there's any oxidation, etc.

Starting with the right driver (with a perfect tip that fits snugly) will reduce the chance of camout and can help remove them, but even then it can be a tricky situation at times.

I personally find that having a really long screw driver helps - I can get more torque without slipping.

Re:Our screwdriver took three years [video] by throwaway0a5e on Thursday September 01, 2022 @11:05AM (#32677370)
High torques on small fasteners are common in electrical and hydraulic applications. But yeah, zero reason for huge amounts of torque in a computer case.
Re:Our screwdriver took three years [video] by rowanG077 on Thursday September 01, 2022 @06:49PM (#32684391)
High torque on the mounting screws of some CPU coolers can significantly help thermal performance.