News for hackers. Stuff that matters.
Re:Why are D-sharp and E-flat considered to be two different... by VBprogrammer on Sunday August 28, 2022 @03:21AM (#32626451)
Out of interest, is this still the same when a violin is playing alongside fretted instruments? Wouldn't they sound out of tune in that case?
Re:Why are D-sharp and E-flat considered to be two different... by Arathorn on Sunday August 28, 2022 @03:43AM (#32626552)
You definitely risk a clash between a well-tempered instrument (like a piano) and a violin, given the piano is just one big compromise whereas the violin can hit the theoretically correct note. Either the violin (typically subconsciously) tweaks the tuning of a given note to match the piano, or the note is too short to notice (given the main way to notice the difference is by spotting pulses, or “beats”, which is the phase difference between the two notes - which could be measured in seconds if it’s <1Hz difference).

Khachaturian loved playing with enharmonics - the violin concerto has runs where you get D# and Eb (or similar) in different parts of the same run - or worse, two different Bb’s, as the run implicitly moves through different keys as it goes. This is then made particularly fun in the lead-up to the cadenza, where the violin duels with the clarinet, and to sound correct, you have to explicitly coordinate on which key the various phrases are actually playing in (given it effectively switches implicit key faster than the explicit key signature). From memory, you end up with the clarinet deliberately playing very different enharmonics to the violin, giving it an incredibly otherworldly feeling.

edit: to clarify, you literally have to say: “so play this Bb as the Bb in a G-minor scale, and this Bb as the Bb in a Ab-major scale” or similar - as they have different frequencies. Or more accurately “play this subphrase as if it’s in G-minor, and this phrase as if it’s in Ab-major”. Despite the Clarinet having fixed stops, you still “lip” the notes up and down to get the right frequency.

Re:Why are D-sharp and E-flat considered to be two different... by lucas_codes on Sunday August 28, 2022 @03:36AM (#32626515)
Yes and no, a violinist has to use their taste and experience to match the intonation of the fretted instrument in some cases (for example, when playing the exact same note) and not other cases (for example, perhaps a piano plays a C and a G and violin plays an E, the violinist will likely want to play a lower E than the piano would to get the exact ratios described in the article.)
Re:Why are D-sharp and E-flat considered to be two different... by beardyw on Sunday August 28, 2022 @03:34AM (#32626506)
Physical instruments can't be perfectly in tune even within themselves. Perfectly in tune is the preserve of electronic instruments. Even so I have a software synth that can adjust its own tuning within a chord to provide a more pleasing sound.
Re:Why are D-sharp and E-flat considered to be two different... by yellowapple on Sunday August 28, 2022 @05:34AM (#32626999)
> Physical instruments can't be perfectly in tune even within themselves.

No, but they can sidestep the need to be perfectly in tune within themselves by allowing the player to produce notes unbounded by discrete steps or subdivisions thereof, e.g. fretless string instruments and trombones.

Re:Why are D-sharp and E-flat considered to be two different... by coldtea on Sunday August 28, 2022 @08:54AM (#32628052)
>by allowing the player to produce notes unbounded by discrete steps or subdivisions thereof, e.g. fretless string instruments and trombones

Then you have the problem that the player will himself be off, unwillingly, most of the time. Often more than the offsets of 12-tet to the "ideal" note.

Re:Why are D-sharp and E-flat considered to be two different... by yellowapple on Sunday August 28, 2022 @11:56PM (#32634656)
> Then you have the problem that the player will himself be off

Maybe at first, but it takes all of two milliseconds to recognize "oh wow, I'm sharp/flat, I should move my hand a smidge further/closer". With more practice comes better muscle memory and better accuracy. Even high schoolers in marching bands can learn how to play a trombone in tune; a professional musician should have no trouble with that at all.

Re:Why are D-sharp and E-flat considered to be two different... by squeaky-clean on Sunday August 28, 2022 @11:33AM (#32629174)
> Often more than the offsets of 12-tet to the "ideal" note.

Any proof to this? 12 tet can vary by 15 cents from just intonation. Even an amateur musician can hear how out-of-tune a 15 cent difference is.

Re:Why are D-sharp and E-flat considered to be two different... by coldtea on Sunday August 28, 2022 @02:07PM (#32630518)
>Even an amateur musician can hear how out-of-tune a 15 cent difference is.

Judging from all kinds of out-of-tune players in live settings, and youtube videos (especially guitar, which I follow a lot) I kind of doubt that...

Re:Why are D-sharp and E-flat considered to be two different... by squeaky-clean on Sunday August 28, 2022 @02:40PM (#32630819)
15 cents is huge. It's 15% of the way to the next note. Even 5 cents sounds noticeably out of tune. Trained musicians can easily tune to less than 2 cents without using tricks like beating to get even more accurate tuning.

Guitarists may be out of tune, but chances are more likely you're hearing a poorly intonated guitar. You can tune the open strings perfectly, but if your string scale-length deviates from what your fretboard expects, you'll have notes that progressively get more out of tune the further down the neck you play. You can't correct this with tuning, you need to adjust the tensions in your bridge saddles, and most amateur guitarists are afraid to do this.

Also you mention live settings, it depends on how big the group is I guess, but at smaller venues and smaller bands the stage monitoring is often so bad you can't hear your own guitar.

Re:Why are D-sharp and E-flat considered to be two different... by yellowapple on Monday August 29, 2022 @12:15AM (#32634747)
Guitars being out of tune happens because of the frets, not some lack thereof; most people tune each string with a tuner and/or by comparing to other strings, which means that some notes will be in tune and others will be very out of tune. This is one of many possible motivations (arguably the primary one besides ease of fingering) for tunings other than the "standard" EADGBE tuning: to change which subset of possible chords are in tune.

This is arguably a non-issue for fretless guitars, but those take more skill to play (and I'd imagine getting some chords perfectly in tune would entail nigh-impossible hand contortions even without there being frets involved).

Re:Why are D-sharp and E-flat considered to be two different... by criddell on Sunday August 28, 2022 @07:35AM (#32627544)
Why does fretless matter? Doesn’t string bending also let you play off-note tones?
Re:Why are D-sharp and E-flat considered to be two different... by chucksmash on Sunday August 28, 2022 @08:43AM (#32627975)
Having to bend up to a given note each time you need to hit it will be slower and less precise.

Generally the bend is done after the fretted note is struck as well. I guess it would be possible to always pre-bend to a given alternate note if you wanted a constant tone, but it definitely seems like working against the grain of the tool versus just using a fretless instrument.

Re:Why are D-sharp and E-flat considered to be two different... by paulmooreparks on Sunday August 28, 2022 @12:14PM (#32629508)
Eddie Van Halen was known to do this, though he was admittedly a freak of nature. He tuned the B string a few cents flat so that barre chords played up the neck would sound more in tune. If he needed to play, for example, a D chord in first position, he'd bend the D fretted on the B string slightly sharp.
Re:Why are D-sharp and E-flat considered to be two different... by criddell on Sunday August 28, 2022 @12:31PM (#32629668)
There’s a video of a Van Halen concert where the synth track for Jump was played back at the wrong bitrate. Eddie worked furiously to find it on the guitar but couldn’t. It’s pretty wild to watch.
Re:Why are D-sharp and E-flat considered to be two different... by coldtea on Sunday August 28, 2022 @08:55AM (#32628060)
Because in fretless it can be done all the time - and picking the note manually by exact finger placement is done all the time.

In fretted instruments, bending is done for effect, not for adjusting each and every note.

Re:Why are D-sharp and E-flat considered to be two different... by criddell on Sunday August 28, 2022 @09:20AM (#32628188)
There are some players of guitars with a scalloped fretboard who do so to experiment with tempered tunings. It's definitely uncommon, but it's not unheard of.
Re:Why are D-sharp and E-flat considered to be two different... by timc3 on Sunday August 28, 2022 @04:10AM (#32626650)
Early electronic instruments, particularly before the 1980s had tuning all over the place, and you would have to wait 30 minutes to get anything resembling stability, even then nothing was guaranteed.

Think it would be possible to mockup some really interesting tunings/temperaments in BitWigs grid or Max4Live.

Re:Why are D-sharp and E-flat considered to be two different... by mrob on Sunday August 28, 2022 @03:46AM (#32626565)
A tonewheel organ could be amplified acoustically, e.g. by physically touching an appropriately sized resonant chamber to the wheel when you press a key. The exact size of the resonator does not matter because it's mode locked to the wheel, which turns at a speed determined only by the gear train. Tonewheel organ gears traditionally do not have perfectly accurate tuning, but there's no reason they couldn't be built to match any tuning system within the limits of human hearing (at greater cost and complexity).
Re:Why are D-sharp and E-flat considered to be two different... by wumpus on Sunday August 28, 2022 @05:27AM (#32626966)
Some players of fretted instruments move the frets to match individual pieces of music.

In modern rock music, some musicians will change guitars every song to have sweeter chords depending on the particular chords in that song.

Re:Why are D-sharp and E-flat considered to be two different... by coldtea on Sunday August 28, 2022 @08:58AM (#32628077)
Which "modern rock musicians" do that? It surely is not widespread in rock.

Rock musicians change guitars (in a live or even studio situation) mostly to get a different sound or a different tuning (like going from "standard" to an open tuning). Not for microtuning adjustments, or because they have moved the frets to match an individual piece.

Some prog musicians might do it, but it surely is not a "rock" custom.

In arabic music, on the other hand, or renaissance music, and other genres, it is, and instruments there often have movable frets.

Re:Why are D-sharp and E-flat considered to be two different... by gromgull on Monday August 29, 2022 @01:06AM (#32634972)
Not moving the frets, but changing guitar: https://youtu.be/Daw93bRHe4Y