News for hackers. Stuff that matters.
Re:Why are D-sharp and E-flat considered to be two different... by powersnail on Sunday August 28, 2022 @03:13AM (#32626430)
The explanation of enharmonic equivalent (though the author didn't use this term) is right, but I do take problem with this sentence:

> but what musical difference does it make? In the present day, the answer is, none whatsoever.

This is not quite right. On all fretless instruments, including most bowed strings and the human voice, enharmonic equivalent notes still have different pitches. The subtle differences in intonation is incredibly important and noticeable on the violin, for example.

Re:Why are D-sharp and E-flat considered to be two different... by VBprogrammer on Sunday August 28, 2022 @03:21AM (#32626451)
Out of interest, is this still the same when a violin is playing alongside fretted instruments? Wouldn't they sound out of tune in that case?
Re:Why are D-sharp and E-flat considered to be two different... by Arathorn on Sunday August 28, 2022 @03:43AM (#32626552)
You definitely risk a clash between a well-tempered instrument (like a piano) and a violin, given the piano is just one big compromise whereas the violin can hit the theoretically correct note. Either the violin (typically subconsciously) tweaks the tuning of a given note to match the piano, or the note is too short to notice (given the main way to notice the difference is by spotting pulses, or “beats”, which is the phase difference between the two notes - which could be measured in seconds if it’s <1Hz difference).

Khachaturian loved playing with enharmonics - the violin concerto has runs where you get D# and Eb (or similar) in different parts of the same run - or worse, two different Bb’s, as the run implicitly moves through different keys as it goes. This is then made particularly fun in the lead-up to the cadenza, where the violin duels with the clarinet, and to sound correct, you have to explicitly coordinate on which key the various phrases are actually playing in (given it effectively switches implicit key faster than the explicit key signature). From memory, you end up with the clarinet deliberately playing very different enharmonics to the violin, giving it an incredibly otherworldly feeling.

edit: to clarify, you literally have to say: “so play this Bb as the Bb in a G-minor scale, and this Bb as the Bb in a Ab-major scale” or similar - as they have different frequencies. Or more accurately “play this subphrase as if it’s in G-minor, and this phrase as if it’s in Ab-major”. Despite the Clarinet having fixed stops, you still “lip” the notes up and down to get the right frequency.

Re:Why are D-sharp and E-flat considered to be two different... by lucas_codes on Sunday August 28, 2022 @03:36AM (#32626515)
Yes and no, a violinist has to use their taste and experience to match the intonation of the fretted instrument in some cases (for example, when playing the exact same note) and not other cases (for example, perhaps a piano plays a C and a G and violin plays an E, the violinist will likely want to play a lower E than the piano would to get the exact ratios described in the article.)
Re:Why are D-sharp and E-flat considered to be two different... by beardyw on Sunday August 28, 2022 @03:34AM (#32626506)
Physical instruments can't be perfectly in tune even within themselves. Perfectly in tune is the preserve of electronic instruments. Even so I have a software synth that can adjust its own tuning within a chord to provide a more pleasing sound.
Re:Why are D-sharp and E-flat considered to be two different... by yellowapple on Sunday August 28, 2022 @05:34AM (#32626999)
> Physical instruments can't be perfectly in tune even within themselves.

No, but they can sidestep the need to be perfectly in tune within themselves by allowing the player to produce notes unbounded by discrete steps or subdivisions thereof, e.g. fretless string instruments and trombones.

Re:Why are D-sharp and E-flat considered to be two different... by coldtea on Sunday August 28, 2022 @08:54AM (#32628052)
>by allowing the player to produce notes unbounded by discrete steps or subdivisions thereof, e.g. fretless string instruments and trombones

Then you have the problem that the player will himself be off, unwillingly, most of the time. Often more than the offsets of 12-tet to the "ideal" note.

Re:Why are D-sharp and E-flat considered to be two different... by yellowapple on Sunday August 28, 2022 @11:56PM (#32634656)
> Then you have the problem that the player will himself be off

Maybe at first, but it takes all of two milliseconds to recognize "oh wow, I'm sharp/flat, I should move my hand a smidge further/closer". With more practice comes better muscle memory and better accuracy. Even high schoolers in marching bands can learn how to play a trombone in tune; a professional musician should have no trouble with that at all.

Re:Why are D-sharp and E-flat considered to be two different... by squeaky-clean on Sunday August 28, 2022 @11:33AM (#32629174)
> Often more than the offsets of 12-tet to the "ideal" note.

Any proof to this? 12 tet can vary by 15 cents from just intonation. Even an amateur musician can hear how out-of-tune a 15 cent difference is.

Re:Why are D-sharp and E-flat considered to be two different... by coldtea on Sunday August 28, 2022 @02:07PM (#32630518)
>Even an amateur musician can hear how out-of-tune a 15 cent difference is.

Judging from all kinds of out-of-tune players in live settings, and youtube videos (especially guitar, which I follow a lot) I kind of doubt that...

Re:Why are D-sharp and E-flat considered to be two different... by squeaky-clean on Sunday August 28, 2022 @02:40PM (#32630819)
15 cents is huge. It's 15% of the way to the next note. Even 5 cents sounds noticeably out of tune. Trained musicians can easily tune to less than 2 cents without using tricks like beating to get even more accurate tuning.

Guitarists may be out of tune, but chances are more likely you're hearing a poorly intonated guitar. You can tune the open strings perfectly, but if your string scale-length deviates from what your fretboard expects, you'll have notes that progressively get more out of tune the further down the neck you play. You can't correct this with tuning, you need to adjust the tensions in your bridge saddles, and most amateur guitarists are afraid to do this.

Also you mention live settings, it depends on how big the group is I guess, but at smaller venues and smaller bands the stage monitoring is often so bad you can't hear your own guitar.

Re:Why are D-sharp and E-flat considered to be two different... by yellowapple on Monday August 29, 2022 @12:15AM (#32634747)
Guitars being out of tune happens because of the frets, not some lack thereof; most people tune each string with a tuner and/or by comparing to other strings, which means that some notes will be in tune and others will be very out of tune. This is one of many possible motivations (arguably the primary one besides ease of fingering) for tunings other than the "standard" EADGBE tuning: to change which subset of possible chords are in tune.

This is arguably a non-issue for fretless guitars, but those take more skill to play (and I'd imagine getting some chords perfectly in tune would entail nigh-impossible hand contortions even without there being frets involved).

Re:Why are D-sharp and E-flat considered to be two different... by criddell on Sunday August 28, 2022 @07:35AM (#32627544)
Why does fretless matter? Doesn’t string bending also let you play off-note tones?
Re:Why are D-sharp and E-flat considered to be two different... by chucksmash on Sunday August 28, 2022 @08:43AM (#32627975)
Having to bend up to a given note each time you need to hit it will be slower and less precise.

Generally the bend is done after the fretted note is struck as well. I guess it would be possible to always pre-bend to a given alternate note if you wanted a constant tone, but it definitely seems like working against the grain of the tool versus just using a fretless instrument.

Re:Why are D-sharp and E-flat considered to be two different... by paulmooreparks on Sunday August 28, 2022 @12:14PM (#32629508)
Eddie Van Halen was known to do this, though he was admittedly a freak of nature. He tuned the B string a few cents flat so that barre chords played up the neck would sound more in tune. If he needed to play, for example, a D chord in first position, he'd bend the D fretted on the B string slightly sharp.
Re:Why are D-sharp and E-flat considered to be two different... by criddell on Sunday August 28, 2022 @12:31PM (#32629668)
There’s a video of a Van Halen concert where the synth track for Jump was played back at the wrong bitrate. Eddie worked furiously to find it on the guitar but couldn’t. It’s pretty wild to watch.
Re:Why are D-sharp and E-flat considered to be two different... by coldtea on Sunday August 28, 2022 @08:55AM (#32628060)
Because in fretless it can be done all the time - and picking the note manually by exact finger placement is done all the time.

In fretted instruments, bending is done for effect, not for adjusting each and every note.

Re:Why are D-sharp and E-flat considered to be two different... by criddell on Sunday August 28, 2022 @09:20AM (#32628188)
There are some players of guitars with a scalloped fretboard who do so to experiment with tempered tunings. It's definitely uncommon, but it's not unheard of.
Re:Why are D-sharp and E-flat considered to be two different... by timc3 on Sunday August 28, 2022 @04:10AM (#32626650)
Early electronic instruments, particularly before the 1980s had tuning all over the place, and you would have to wait 30 minutes to get anything resembling stability, even then nothing was guaranteed.

Think it would be possible to mockup some really interesting tunings/temperaments in BitWigs grid or Max4Live.

Re:Why are D-sharp and E-flat considered to be two different... by mrob on Sunday August 28, 2022 @03:46AM (#32626565)
A tonewheel organ could be amplified acoustically, e.g. by physically touching an appropriately sized resonant chamber to the wheel when you press a key. The exact size of the resonator does not matter because it's mode locked to the wheel, which turns at a speed determined only by the gear train. Tonewheel organ gears traditionally do not have perfectly accurate tuning, but there's no reason they couldn't be built to match any tuning system within the limits of human hearing (at greater cost and complexity).
Re:Why are D-sharp and E-flat considered to be two different... by wumpus on Sunday August 28, 2022 @05:27AM (#32626966)
Some players of fretted instruments move the frets to match individual pieces of music.

In modern rock music, some musicians will change guitars every song to have sweeter chords depending on the particular chords in that song.

Re:Why are D-sharp and E-flat considered to be two different... by coldtea on Sunday August 28, 2022 @08:58AM (#32628077)
Which "modern rock musicians" do that? It surely is not widespread in rock.

Rock musicians change guitars (in a live or even studio situation) mostly to get a different sound or a different tuning (like going from "standard" to an open tuning). Not for microtuning adjustments, or because they have moved the frets to match an individual piece.

Some prog musicians might do it, but it surely is not a "rock" custom.

In arabic music, on the other hand, or renaissance music, and other genres, it is, and instruments there often have movable frets.

Re:Why are D-sharp and E-flat considered to be two different... by gromgull on Monday August 29, 2022 @01:06AM (#32634972)
Not moving the frets, but changing guitar: https://youtu.be/Daw93bRHe4Y
Re:Why are D-sharp and E-flat considered to be two different... by algesten on Sunday August 28, 2022 @05:45AM (#32627035)
One great example of this is vocalist groups. The Enya/Lord of the Rings track "May it Be" as sung by Voces8. https://www.youtube.com/watch?v=x7M5ZqFSynQ

Notice how the fifths are perfectly "still", no beating. It can almost sound out of tune if you're too used to tempered tuning.

Re:Why are D-sharp and E-flat considered to be two different... by DiggyJohnson on Sunday August 28, 2022 @08:07AM (#32627758)
This is also what makes Barbershop magical.
Re:Why are D-sharp and E-flat considered to be two different... by throwaway287391 on Sunday August 28, 2022 @04:17AM (#32626684)
Huh…can I get a source on this that delves into it more? I played the cello in an orchestra, solos, and chamber music for about 10 years growing up and I’ve literally never heard anyone mention I or anyone else should’ve been putting my finger in a slightly different place for C# and Db. I suspect this is for all intents and purposes not true in the 21st century.
Re:Why are D-sharp and E-flat considered to be two different... by algesten on Sunday August 28, 2022 @05:55AM (#32627075)
You will adjust without even realizing. You'll change your pitch to sound right in relation to everyone around you. This probably means that in practice your finger is slightly up or down depending.

It is also a reason why when playing an A, many prefer moving the hand to 4th position on the D string, rather than using the A-string with no finger. Partly because you can make a better tone (add vibrato if wanted), but you can also intonate.

Re:Why are D-sharp and E-flat considered to be two different... by dahart on Sunday August 28, 2022 @01:27PM (#32630145)
> You will adjust without even realizing. […] This probably means

This might be true once in a while on very slow chords or the final resolving chord of a piece, maybe, but this sounds like assumption to me based on it being theoretically possible, and not evidence that it actually happens often. From experience, it sure seems like years upon years of equal tone muscle memory, from having to play with other instruments, is far more likely to dominate finger placement. Not to mention everyone being used to equal tone - having equal tone sensibility as to what sounds right. Sounding right in relation to everyone around you is still valid in 12-TET. Enharmonic micro intonations are almost certainly not happening during fast sequences, and because of that, the argument that it’s subconscious and imperceptible seems implausible - professional musicians absolutely would notice a change in finger placement depending on context, because of key changes, because of abrupt fast-slow resolutions, because of chords and arpeggios and situations where open strings are called for, etc. etc..

Re:Why are D-sharp and E-flat considered to be two different... by analog31 on Sunday August 28, 2022 @10:08AM (#32628497)
You didn't miss out on much. My cello teacher mentioned it to me early on, in passing, but it's basically useless trivia until you actually have enough control for it to make a difference. From observing my kids go through music study, I'd say it emerges as something to actually think about at the college level.

Instead, I switched to the double bass, joined the jazz band, and majored in physics. ;-)

I think "sweetening without realizing" may be a thing. You've assimilated the sound of classical (or whatever) music through listening. You can hear how you want the note sound in your head, and your finger goes there.

Re:Why are D-sharp and E-flat considered to be two different... by wumpus on Sunday August 28, 2022 @05:24AM (#32626959)
You probably were "sweetening" chords without realizing it.
Re:Why are D-sharp and E-flat considered to be two different... by alar44 on Sunday August 28, 2022 @04:30AM (#32626737)
It's not the difference between C# or Db per se, it's a function of what note in the chord it is occupying.
Re:Why are D-sharp and E-flat considered to be two different... by throwaway287391 on Sunday August 28, 2022 @04:40AM (#32626789)
I’m responding to this part of the parent’s post: On all fretless instruments, including most bowed strings and the human voice, enharmonic equivalent notes still have different pitches. The subtle differences in intonation is incredibly important and noticeable on the violin, for example.
Re:Why are D-sharp and E-flat considered to be two different... by rawling on Sunday August 28, 2022 @05:20AM (#32626935)
Would that not just manifest as... you feel like you're out of tune, so you adjust minutely?
Re:Why are D-sharp and E-flat considered to be two different... by kzrdude on Sunday August 28, 2022 @08:16AM (#32627806)
Yes exactly, and one would intonate it slightly differently by ear depending on what role the note has in the current harmony is the idea.

Presume a base note of A is being played and the violin plays a C# functioning as the major third of an A major chord. The ear would want to play the C# justly intonated to the root note A, or maybe a compromise somewhere between equal temperament and just intonation.

See for example https://music.stackexchange.com/questions/113812/violin-tuni...

there's a lot of nuance. A lot of playing it by ear. :)

Re:Why are D-sharp and E-flat considered to be two different... by tralarpa on Sunday August 28, 2022 @05:55AM (#32627074)
This is indeed a very weird thing to say by the author. Your "not quite right" is too kind to the author. As you wrote, good fretless instruments and singers will absolutely play/sing those notes differently, although maybe unconsciously.
Re:Why are D-sharp and E-flat considered to be two different... by coldtea on Sunday August 28, 2022 @09:00AM (#32628081)
More often than note (sic), they'll play them the same as a piano would, to match the regular instruments they play along with.
Re:Why are D-sharp and E-flat considered to be two different... by ninkendo on Sunday August 28, 2022 @09:13AM (#32628141)
In a given orchestra (for example), what instruments have fixed tuning? A piano yes (although lots of orchestral music doesn’t have piano.) The harp? I struggle to think of others.

Wind instruments essentially have continuous tuning because the player can adjust the pitch with their lips and vocal shape. Orchestral string instruments are all fretless (and thus continuously pitched.) Singers, same thing. Even fretted instruments are often played with a lot of vibrato that masks any true pitch problems.

I think the inability to play with a perfect pitch is more the exception than the rule (at least in “classical” music), it’s just that piano is such a popular instrument in the modern era that this becomes a problem.

Re:Why are D-sharp and E-flat considered to be two different... by coldtea on Sunday August 28, 2022 @09:24AM (#32628216)
>what instruments have fixed tuning?

Not that many: the piano, the harp, the glockenspiel, etc.

But the thing is, most modern music, is not with a classical orchestra, but can still have violin (and in some genres, like bluegrass, irish, country, etc. it often does).

Re:Why are D-sharp and E-flat considered to be two different... by coldtea on Sunday August 28, 2022 @08:52AM (#32628036)
>This is not quite right. On all fretless instruments, including most bowed strings and the human voice, enharmonic equivalent notes still have different pitches.

Not because we want it or it is some ideal situation, though.

Just because 12-tet can't get a single note to be in the exact right ratio. If it could, we'd play D# and Eb exactly the same.

Besides, if the fretless instrument is not soloing, it might still play it as the 12-tet single note compromise, to match what others play at the same time.

Re:Why are D-sharp and E-flat considered to be two different... by sgustard on Sunday August 28, 2022 @12:14PM (#32629512)
In practice what's the difference in finger location between these almost identical notes on a violin? A millimeter?
Re:Why are D-sharp and E-flat considered to be two different... by powersnail on Sunday August 28, 2022 @12:53PM (#32629862)
Usually the difference is a slight roll of the finger. But you can hear it. You might not know you can hear the difference in pitch, but you can hear one performer being cleaner than another and intonation accuracy is a huge factor.
Re:Why are D-sharp and E-flat considered to be two different... by palimpsests on Sunday August 28, 2022 @01:08PM (#32629978)
it depends on where it is on the fretboard.

the higher you go in frequency, the physical distance between each interval on the fretboard becomes smaller. so if a +/- 5 cent adjustment is 0.5 mm at the first “fret” after the nut, it will be something like be 0.1 mm when you are at the 7th “fret” location (i.e where the interval of perfect fifth, relative to the open string, is played).