News for hackers. Stuff that matters.
Re:TinyTapeout: Get your design on an actual ASIC by alain94040 on Saturday August 27, 2022 @12:19PM (#32620581)
What can one do with 200 gates? I struggle to think of anything interesting.
Re:TinyTapeout: Get your design on an actual ASIC by r3013 on Saturday August 27, 2022 @12:26PM (#32620634)
I suppose it depends on one's interests.

For example one could try to clone many of these: https://en.wikipedia.org/wiki/List_of_7400-series_integrated...

Another fun project idea. Make a 1bit processor slice. Then show how many slices can make a larger system. Similar to:

"Using LSI processor bit-slices to build a PDP-11—A case study in microcomputer design" https://dl.acm.org/doi/pdf/10.1145/1499402.1499444

Re:TinyTapeout: Get your design on an actual ASIC by cmrdporcupine on Saturday August 27, 2022 @12:41PM (#32620768)
A full 6502 is only like 900 gates. One could do a neat project with separate ALUs chips, control logic, etc, like AM2900-style.

From Googling, it sounds like the 74181 ALU chip was only ~75 gates or so https://en.wikipedia.org/wiki/74181. And the AM2901 something like ~500

Re:TinyTapeout: Get your design on an actual ASIC by tdeck on Sunday August 28, 2022 @02:02AM (#32626156)
The PSP 8/s used only 519 logic gates, at least according to online sources I've found.
Re:TinyTapeout: Get your design on an actual ASIC by tdeck on Sunday August 28, 2022 @07:32PM (#32633211)
Sorry PDP 8/s
Re:TinyTapeout: Get your design on an actual ASIC by cmrdporcupine on Tuesday August 30, 2022 @02:45PM (#32653617)
Yeah I looked at my keyboard and saw D beside S and figured that's what you're saying.

Read the PDP/8 instruction sheet. Wow that's nice and minimal.

Re:TinyTapeout: Get your design on an actual ASIC by hugs on Saturday August 27, 2022 @07:44PM (#32624373)
"I could make a motor driver!" was the first thing that came to mind. I have a need for lots of motor driver chips for an art project. (Think hundreds or thousands of small DC motors.) At a minimum, a basic "h-bridge" circuit to control one motor is 4 transistors (and possibly 4 additional diodes). I'll still have to figure out if TinyTapeout could handle the voltage and current of one small DV motor, though. (5-12V, possibly up to 800mA). Of course, there are simple h-bridge chips already on the market for $0.20/chip, but designing my own would be fun.
Re:TinyTapeout: Get your design on an actual ASIC by jononor on Sunday August 28, 2022 @04:12AM (#32626657)
If one could integrate some logic that can be communicated with over a digital protocol it would get real interesting. Maybe it could be the start of an open source I/O chip for the Klipper 3d-printer firmware. The output stage could be using discrete SMD components, to get sufficient power capacity.
Re:TinyTapeout: Get your design on an actual ASIC by alain94040 on Saturday August 27, 2022 @01:38PM (#32621268)
Maybe an idea: Could I use this to put a secret key in the gates, with some mechanism to prevent brute-force breaking? So my own personal Yubikey essentially.

Not sure how to protect against replay, with only 200 gates...

Re:TinyTapeout: Get your design on an actual ASIC by no_time on Sunday August 28, 2022 @08:50AM (#32628019)
Could work if you are OK with hundreds of engineers seeing your key during the verification/manufacturing process.
Re:TinyTapeout: Get your design on an actual ASIC by mysterydip on Saturday August 27, 2022 @03:40PM (#32622396)
It mentions a possible set of dip switches and a 7 segment LED. You could make a puzzle game of "lights out" where only a certain combo of switches would have all the segments off.
Re:TinyTapeout: Get your design on an actual ASIC by amelius on Saturday August 27, 2022 @02:15PM (#32621603)
Hashing?