Re:Finally fixed my PC’s persistent graphics and audio stutters
by theevilsharpie on Wednesday August 24, 2022 @03:24PM
(#32584476)
Many years ago, I had an Athlon 64 workstation paired with some type of 3Ware SATA RAID controller (a 9650SE, I think).
Every other boot, the BIOS would fail to initialize the controller, leaving the computer stuck at a "non-bootable device" error until I could manually reboot it.
My solution? A perpetually plugged-in USB flash drive with a small boot loader that would simply reboot the machine again, set to a lower boot priority than the SATA RAID controller.
It was pretty stupid, but if it's stupid and it works...
Re:Finally fixed my PC’s persistent graphics and audio stutters
by bombcar on Wednesday August 24, 2022 @03:41PM
(#32584711)
I had something similar and just used the USB to hold ... LILO at the time? Can't recall.
Re:Finally fixed my PC’s persistent graphics and audio stutters
by goosedragons on Wednesday August 24, 2022 @05:10PM
(#32585800)
My ThinkPad has something similar with the microSD card slot. You have to type "lspci" for it to notice there's an SD card inserted. I don't use the slot much so it's not a big deal but it's literally the only thing that doesn't play nice with Linux.
Re:Finally fixed my PC’s persistent graphics and audio stutters
by Arnavion on Thursday August 25, 2022 @01:57AM
(#32590069)
If there's a udev event generated when you insert the SD card, you could write a udev rule to exec `lspci` when it happens.
Re:Finally fixed my PC’s persistent graphics and audio stutters
by cwillu on Wednesday August 24, 2022 @07:48PM
(#32587447)
I keep a hacks file in my home directory so that when a random thing breaks after an upgrade or a new system, I can quickly review the fixes that I needed three years ago but that upstream couldn't be bothered to fix.
Open-source is the best worst-thing ever.
It worked and sounded great in Windows; it also worked and sounded great in Linux, with one exception: the card supported ISA PNP, which was great, but the kernel module for the sound card wouldn't load unless I did `cat /proc/isapnp` first.
I had no idea why, and it took a few reboots and trial-and-error to narrow it down to this janky workaround, but it worked so I just configured modprobe to run `cat /proc/isapnp > /dev/null` before trying to load the module and I never had to worry about it again.
Technology sure is weird sometimes.