If anyone is curious, I recommend reading https://www.andy-kirkpatrick.com/blog/view/rappel-knots-1 (it has helpful illustrations on why the EDK doesn't catch)
And I'd also opt for a Kleimheist or Autoblock over the classic Prusik.
Not sure if I think this was a good selection of essential climbing knots and the presentation was odd. For instance, I'd present the Prusik in an abseiling context. The article mentions using a Prusik to ascend their rope when they've fallen off an overhang, and I have yet to see that. What I see routinely is someone using a Prusik of some sort as a backup when abseiling.
If all of this sparked the curiosity of someone I recommend VDiffClimbing for further information https://www.vdiffclimbing.com/abseil/
But don't go climbing outdoors if you don't have someone that is experienced to go along with you. Take a course or several. It is possible to learn on your own, but it is a high-risk activity to figure these things out as you go on your own. Accidents, even fatal ones, happen to people that know what they are doing.
Broadly agree, but a ring bend is handy for tying lengths of tape in to slings. Pretty niche these days though given the ubiquity of sewn slings.
For my part I wouldn't use a figure 8 in a bight to get a loop in the middle of a lonf rope that's going to take load - the butterfly knot is far superior.
came here to say
I would use either for a directional load, but only an alpine butterfly if loading the loop is conceivable. And using the flat 8 as a bend is suicidal.
[1] http://user.xmission.com/~tmoyer/testing/EDK.html [2] https://www.animatedknots.com/alpine-butterfly-bend-knot [3] https://en.wikipedia.org/wiki/Offset_figure-eight_bend
Also, not sure how the name was picked-up, but that's just plain bad marketing putting Death in the name :)
(Big caveat: this all depends on joining nylon ropes of similar diameters. Different diameters and UHMWPE cord has different rules)
My understanding is that the American's picked it up from the Europeans in the 90's, but then mixed up with the figure-8 knot which is the actual death knot. Some guy on the internet did some tests, and the figure 8 will roll and capsize at about 1-2 kN. Rappel loads are usually a bit under 1 kN, but if you hit enough snags, it could come out and there was a bunch of accidents resulting from that.
The overhand knot, when tied normally will role at about 3-4 kN which is well above a normal amount of force in a rappel. Also, it tightens as it rolls, so with enough tail, you'll be dead from something else before it could be a concern.
Incidentally, the double fisherman has a bad habit of getting stuck, so if you're doing multiple rappels, especially in icy conditions, or in sticky/jagged rocks, it presents a whole different safety problem.
Edit: source https://user.xmission.com/~tmoyer/testing/EDK.html
There are alternatives to the Prussik such as the Klemheist which don't jam as badly.
I wouldn't use a ring bend - the double fisherman's is superior for tying rope or cord ends together to create a sling. And I definitely wouldn't use either a ring bend or a double fisherman's to link ropes for abseil. An overhand tied in both ropes (with a 50cm tail) -aka the EDK or European Death Knot is way superior, as the body of the knot sits to one side of the line of the tightened rope, so it tends not to catch in cracks.
Finally, extending slings by linking them over and under into a reef knot is stronger than a girth hitch.