News for hackers. Stuff that matters.
Re:Teardown of a quartz crystal oscillator and the tiny IC i... by fake-name on Tuesday August 09, 2022 @02:12AM (#32394739)
It's a function of size. Tuning fork crystals generally have frequencies in the range of a few tens of kilohertz (generally 32768 Hz).

Quartz discs vibrate at many megahertz. A tuning-fork like structure that oscillated at 100 MHz would be far to small to easily manufacture.

------

One fun note: crystals like this are used for measuring deposited material in vacuum processes like PVD [1] or similar [2]. The crystal is exposed inside the vacuum chamber where it will be deposited on at the same rate as the target, and the change in frequency is a direct function of the mass (and therefore thickness) of the deposited material.

Eventually, the exposed crystal has to be replaced as it no longer oscillates properly.

1: https://en.wikipedia.org/wiki/Physical_vapor_deposition 2: https://www.semicore.com/news/72-thin-film-deposition-contro...

Re:Teardown of a quartz crystal oscillator and the tiny IC i... by melony on Tuesday August 09, 2022 @02:18AM (#32394773)
Note 32768 Hz is chosen because it is a power of 2 (the 15th power).
Re:Teardown of a quartz crystal oscillator and the tiny IC i... by HPsquared on Tuesday August 09, 2022 @06:47AM (#32396155)
And therefore you can get a 1 Hz clock from a series of binary frequency dividers (flip-flops). That is, having the crystal oscillate at a power-of-2 frequency simplifies the circuitry a great deal.
Re:Teardown of a quartz crystal oscillator and the tiny IC i... by krallja on Tuesday August 09, 2022 @10:58AM (#32398937)
The first power of two that is outside the range of (most) human hearing.
Re:Teardown of a quartz crystal oscillator and the tiny IC i... by anotherhue on Tuesday August 09, 2022 @05:52AM (#32395907)
A PVD sensor is a very clever use case! Thanks for highlighting.