News for hackers. Stuff that matters.
Re:Starlink's current problem is capacity by hedora on Wednesday July 27, 2022 @01:09PM (#32253174)
I think their biggest issue is the mechanical engineering of the dishes. They use non-standard mounts, and (despite using bog-standard outdoor/riser-rated cat 5e cable) non-standard ethernet connectors.

For people replacing an existing internet connection with starlink, the cost of swapping out the existing (perfectly good) cable and antenna mount dwarfs the retail (and even manufacturing) cost of the dish.

Also, they don't document the electrical requirements for the ethernet cable, so people end up guessing, forcing it to turn on the on-board heater, then checking for voltage droop.

Even oversubscribed, they're better than most rural ISP options though.

I agree that the starlink customer support people are extremely overworked. In my experience, they're also completely incompetent.

The "impossible to update out of date firmware" issue is ridiculous, especially since they specifically market the RV service for use cases where you buy the dish and then pause the service for the 11.5 months of the year when you're not using your RV.

Re:Starlink's current problem is capacity by PinkPigeon on Wednesday July 27, 2022 @02:37PM (#32254637)
Do you happen to know anyone who managed to figure out what the electrical requirements for the cable are? We tried mounting the antenna outside and connecting the cable via an external box to the inside (using cat 6 cable), but Starlink immediately started complaining about a 'bad connection', which went away when we routed the cable to the power brick unimpeded. But it would really be much neater if we could use our own house's ethernet wiring. But evidently Starlink doesn't like it.
Re:Starlink's current problem is capacity by jpk2f2 on Wednesday July 27, 2022 @02:54PM (#32254923)
Re:Starlink's current problem is capacity by PinkPigeon on Wednesday July 27, 2022 @05:07PM (#32256978)
I'm on the original, round dish, not the rectangular new one. I wonder whether this can be done on the round dish, as that one used even more power.
Re:Starlink's current problem is capacity by virtuallynathan on Wednesday July 27, 2022 @07:06PM (#32258249)
It's pretty low as long as its not a rev1_preprod, the rev2_proto2 and proto4 models use 30-50W for me.
Re:Starlink's current problem is capacity by tguvot on Wednesday July 27, 2022 @02:58PM (#32255010)
>I think their biggest issue is the mechanical engineering of the dishes. They use non-standard mounts,

They sell for $15 or so pipe adapter. Works perfectly well with pole that dishtv was mounted on. The none-standard mount that they have (at least on new dishes) besides actually mounting dish to pole also has function of holding cable in place

Re:Starlink's current problem is capacity by wrycoder on Wednesday July 27, 2022 @10:17PM (#32259742)
And that pipe adapter is a work of art. It looks like it was designed by a rocket engineer. And it’s beautifully made and powder coated. Amazing for the price.
Re:Starlink's current problem is capacity by olyjohn on Thursday July 28, 2022 @12:19PM (#32266441)
All that engineering, and then I mounted mine on a $16 galvanized fence post...