News for hackers. Stuff that matters.
Re:Ask HN: What can you realistically manufacture in your ga... by eimrine on Monday July 18, 2022 @03:28PM (#32142438)
I have a dream of producing custom recumbents. I don't know where to get thin-walled pipes, but a start capital is roughly as you have described.
Re:Ask HN: What can you realistically manufacture in your ga... by Cieplak on Monday July 18, 2022 @03:40PM (#32142599)
McMaster-Carr supplies thin-wall chromoly tube [0] suitable for fabricating bicycle frames.

[0] tube is measured by the outer diameter; pipe is measured by the inner diameter

Re:Ask HN: What can you realistically manufacture in your ga... by SpikedCola on Monday July 18, 2022 @04:09PM (#32143015)
McMaster-Carr won’t sell to small companies, my friends and I have tried several times, only to have orders cancelled for the above-mentioned reason. It’s a shame because their website has a wealth of information (CAD drawings, measurements, etc.), one of the best I’ve seen.
Re:Ask HN: What can you realistically manufacture in your ga... by maicro on Monday July 18, 2022 @04:28PM (#32143228)
What exactly have you tried to order? I've been ordering from McMaster both to a fairly small business and my personal home address with absolutely no issues for over 8 years.

Are you in the US? If you're trying to buy those tubes, are you trying to order very long lengths? UPS apparently has a limit of 108" total length, and a sum of 165" for length + "girth".

As for McMaster overall - I agree with some other sentiments here that they're great, though I do admit the "McMaster tax" (paying 10~200% what you could find the identical part somewhere else for) can be annoying at times, but is worth it when you want a reliable supplier with almost universally good quality products.

edit: Based on your reply to a sibling comment, I looked around, and found this thread that seems to reinforce your experience that McMaster shipping to Canada is...unreliable: https://www.chiefdelphi.com/t/mcmaster-carr-supplying-to-int...

I would try the recommendation there of ensuring you have a business name on the order, or, contact their support - I've had to contact them a couple times and they were generally quite helpful.

Good luck.

Re:Ask HN: What can you realistically manufacture in your ga... by plegresl on Monday July 18, 2022 @04:21PM (#32143138)
The website and all the part details are amazing. I've made many purchases from McMaster for personal / hobby use so I'm surprised to hear about difficulties purchasing from them.
Re:Ask HN: What can you realistically manufacture in your ga... by SpikedCola on Monday July 18, 2022 @04:25PM (#32143191)
We are in Ontario, Canada, if it matters. I know Quinn from blondiehacks orders from them without difficulty, so I’m not sure what it is about us that they don’t like. They tend to be very curt/nearing unfriendly in their responses.
Re:Ask HN: What can you realistically manufacture in your ga... by bombcar on Monday July 18, 2022 @05:02PM (#32143650)
There may be difficulties shipping cross-border (customs is hell) - so maybe you "need" to find an address just over the border in the US to ship to instead?
Re:Ask HN: What can you realistically manufacture in your ga... by SpikedCola on Monday July 18, 2022 @05:22PM (#32143955)
I do have a US PO Box, so I will try this next time. Thanks for the suggestion.
Re:Ask HN: What can you realistically manufacture in your ga... by bombcar on Monday July 18, 2022 @05:50PM (#32144383)
Those also don't usually allow "package" delivery (think UPS) but maybe something can be worked out. Some small post offices will accept a UPS delivery to "unit PO BOX number" but I don't think they're supposed to.
Re:Ask HN: What can you realistically manufacture in your ga... by PebblesRox on Monday July 18, 2022 @07:30PM (#32145500)
Some USPS locations do offer a Street Addressing option that allows for receiving parcels to a PO Box:

https://postalpro.usps.com/mailing/competitivepoboxes

Re:Ask HN: What can you realistically manufacture in your ga... by kevin_thibedeau on Tuesday July 19, 2022 @01:24AM (#32147844)
Quinn is in LA. They just don't like bothering with international shipping.
Re:Ask HN: What can you realistically manufacture in your ga... by SpikedCola on Thursday July 21, 2022 @08:06AM (#32178363)
Ah, my mistake, thanks for letting me know.
Re:Ask HN: What can you realistically manufacture in your ga... by ntietz on Monday July 18, 2022 @04:34PM (#32143300)
I have successfully ordered and received parts from McMaster-Carr as an individual.

I'm not sure if this is a super variable experience or if it has changed over time (I first ordered from them in 2020).

Re:Ask HN: What can you realistically manufacture in your ga... by nikitaga on Monday July 18, 2022 @09:09PM (#32146226)
Since you're in Canada too, my experience might be relevant. My first McMaster order last year was cancelled with the following response:

"Due to the cost and complexity of shipping our products to Canada, we are only able to accept orders from businesses and schools. We’ve canceled your order. If this material is not for personal use, please resubmit your order online using the business or school name."

After that, I added my company's legal name to both shipping and billing address, put "Please note: this order is for business" in order comments the first couple times, and had no problems since.

I wish we had something similar in Canada that has a good selection and isn't a pain to deal with, but as it stands, McMaster is too good to give up on.

ETA: Having read your other comment, it appears they might have restricted their policy since then, but grandfathered existing clients. That would be really sad for Canadians.

Re:Ask HN: What can you realistically manufacture in your ga... by HeyLaughingBoy on Monday July 18, 2022 @05:34PM (#32144159)
I am a business of one and I've bought from McMaster-Carr often. A long time ago (like 25 years ago) it was harder to buy from them as a tiny company, but these days they take credit cards on an online shopping list like everyone else.
Re:Ask HN: What can you realistically manufacture in your ga... by kansface on Monday July 18, 2022 @05:15PM (#32143842)
I just ordered 40 SS J Bolts from them for my home project after spending a couple of weeks fruitlessly trying to get them from a local company. I placed an order on the website and they showed up in 2 days.
Re:Ask HN: What can you realistically manufacture in your ga... by katmannthree on Monday July 18, 2022 @04:29PM (#32143244)
Did they explicitly tell you that's why the order was cancelled? I've placed many personal orders with them and never had issues.
Re:Ask HN: What can you realistically manufacture in your ga... by SpikedCola on Monday July 18, 2022 @05:22PM (#32143946)
Their reply, verbatim:

Hi xxxx,

We only ship to large businesses and schools in Canada. We can't accept your order. I'm sorry for the inconvenience. You might want to try Fastenal or Motion Canada.

Lauren

Re:Ask HN: What can you realistically manufacture in your ga... by tyrfing on Monday July 18, 2022 @05:54PM (#32144434)
I can pretty much guarantee that this is due to customs/import charges. Consumers will cancel orders over a surprise bill from that, a big business won't care at all or will have their own broker.
Re:Ask HN: What can you realistically manufacture in your ga... by nikitaga on Tuesday July 19, 2022 @04:12AM (#32148816)
I could be confusing them with DigiKey, but I think McMaster handle customs themselves, no customer action needed.

If that's a problem to them, I'm guessing they don't have a fully automated solution to that like e.g. DigiKey does.

Re:Ask HN: What can you realistically manufacture in your ga... by ska on Monday July 18, 2022 @08:05PM (#32145785)
Were you ordering as an individual? They definitely ship to small businesses on both sides of the border, but might be leery of an individual handling the customs stuff properly. Maybe solve that with a UPS account?
Re:Ask HN: What can you realistically manufacture in your ga... by HeyLaughingBoy on Monday July 18, 2022 @05:36PM (#32144185)
FWIW, one of the benefits of Fastenal is being able to walk in and browse the shelves (just ask them when they're not busy. Never had a problem)
Re:Ask HN: What can you realistically manufacture in your ga... by convolvatron on Monday July 18, 2022 @05:48PM (#32144360)
idk. they made me get a commercial account. and their stock for my local shop leans heavily towards grade-8 construction fasteners and not the smaller machine screws that I generally use.
Re:Ask HN: What can you realistically manufacture in your ga... by Rantenki on Monday July 18, 2022 @05:34PM (#32144157)
Aircraft spruce sells tubing in a variety of lengths, and ship to Canada. They're a good source for tubes that don't fit normal framebuilding supply inventories. They ship to Canada directly:

https://www.aircraftspruce.ca/

I've built a bike frame with their 4130 tubes.

Re:Ask HN: What can you realistically manufacture in your ga... by abakker on Monday July 18, 2022 @03:55PM (#32142835)
bicycle tube for making bikes out of chromoly can be bought from many makers. The good stuff doesn't have uniform wall thickness but has thinner sides and thicker top/bottom for lower weight/stiffness. It should also have butted ends, meaning that it has thicker walls at the ends.
Re:Ask HN: What can you realistically manufacture in your ga... by StillBored on Monday July 18, 2022 @06:06PM (#32144609)
Local metals dealer?

But at this point carbon fiber is pretty easy to manufacture. For a bike frame the hard part would be design optimization and stress calculations. It might even be easier once you have the molds. I'm not really sure I understand why some upstart carbon bike company hasn't cleaned up given how inexpensively some of the no-name carbon parts from china are (and how they appear to be at least as good if not better than some of the name brand stuff in some cases).

Re:Ask HN: What can you realistically manufacture in your ga... by 6510 on Monday July 18, 2022 @09:53PM (#32146601)
I see some high end custom jobs where they swapped some of the carbon fiber with some kind of coating on some kind of styrofoam. Its much more bulky to get usable strength but its not that heavy and it makes no noise.
Re:Ask HN: What can you realistically manufacture in your ga... by sbf501 on Monday July 18, 2022 @05:31PM (#32144107)
Are you going to make the old-timey recombants with the steering below the seat, unlike the modern ones with the huge handlebars? I miss those. Like this one:

https://www.cyclingabout.com/heaviest-touring-bike-ever-behe...

(I met this guy in Cambridge Mass in the 80's).

Re:Ask HN: What can you realistically manufacture in your ga... by eimrine on Tuesday July 19, 2022 @01:02AM (#32147722)
> Are you going to make the old-timey recombants with the steering below the seat, unlike the modern ones with the huge handlebars?

I think that steer is something easily replaceable. I want to do lowriders - when the lowest point of butt is lower than a line between two axles. This is an incredible fast form-factor for totally good roads. Thanks HN for a discussion.

Re:Ask HN: What can you realistically manufacture in your ga... by jamiek88 on Monday July 18, 2022 @08:02PM (#32145766)
Funny how most of that gear could just be an iPhone now!

I remember this from the 80’s too, I was 8 when I met him and it was the coolest thing ever.

Re:Ask HN: What can you realistically manufacture in your ga... by sbf501 on Wednesday July 20, 2022 @05:18PM (#32172468)
It's insane, right? GPS antenna tech evolved crazy fast after high-res GPS was made available to the public in the mid-90's. Not to mention all the 3G/LTS/4G/5G investment.

Things could still be made smaller if there were more antennae nearby: hence lower transmit power. But I think the smartphone format is pretty dang near perfect.

Re:Ask HN: What can you realistically manufacture in your ga... by wyre on Monday July 18, 2022 @04:19PM (#32143110)