News for hackers. Stuff that matters.
Re:Why software engineers like woodworking by peter422 on Thursday June 09, 2022 @10:14PM (#31689227)
While it is true you can often buy IKEA furniture for less than the wood would cost you, for any “real” furniture made out of real wood, anything you build will be far, far cheaper than what you can buy. Of course that is valuing labor at $0 and cost of tools at $0.

If you are making something like cabinet doors that are mostly labor and not much wood, you can easily make them for one fifth the cost of what you’d pay from ikea… but tons of labor!

Re:Why software engineers like woodworking by dylan604 on Friday June 10, 2022 @12:40AM (#31690116)
The same thing can pretty much be said about any hobby. I know several people that do handmade clothing with both sewing or knitting. The knitters buying the really nice yarn will spend more in the yarn than a finished item from the store.

Aside from the pleasure of just doing something on your own, what you will probably have is something unique. People making electronic projects will probably adding features not available retail, or clothing in patterns and stitch design their own, etc.

Lots of way to value something other than $

Re:Why software engineers like woodworking by johnwheeler on Thursday June 09, 2022 @10:19PM (#31689267)
No way! I built myself an oak side table. Solid oak, $200 worth of wood. Now, this was during the beginning of the pandemic when wood prices were through the roof, but still, I bet I could get the same oak table for $150 or less.
Re:Why software engineers like woodworking by jcims on Friday June 10, 2022 @07:22AM (#31692531)
Where are you going to find an oak table for $150? $500 maybe if you're ok cutting corners. I was just out yesterday looking around and there wasn't a thing I'd put in my house (and I'm not that particular) that was under $1500.
Re:Why software engineers like woodworking by pcthrowaway on Thursday June 09, 2022 @10:35PM (#31689340)
This seems true to me (as a non-woodworker whose ex-partner got really into it), but what she explained to me was that her own furniture would be higher quality and also made the way she wants it (which you can't really put a price on)

You can definitely pick up used solid wood furniture for cheaper than building it yourself (especially if you consider the opportunity cost of your time), but you might not get exactly what you want.

Re:Why software engineers like woodworking by jstanley on Friday June 10, 2022 @07:14AM (#31692472)
Mass-produced hardwood furniture (OakFurnitureLand etc.) seems to be made of absolutely tiny scraps glued together, whereas if you are making something yourself you're more likely to use larger pieces of wood and less able to make use of small offcuts. I think that accounts for a lot of the price difference.
Re:Why software engineers like woodworking by peter422 on Thursday June 09, 2022 @10:27PM (#31689305)
Are you buying rough lumber?

There is some arbitrage as certain species of wood are cheaper if you are closer to where they come from (for example Douglas fir is cheaper on the west coast vs pine on the east coast), and for a small item it can be built where the wood is cheapest and shipped from there.

However, I think it’s not likely to make that large of a difference. Wholesale lumber prices aren’t that far off from what a hobbyist pays if you go to the same places.

Re:Why software engineers like woodworking by saalweachter on Friday June 10, 2022 @10:15AM (#31694527)
Auctions for new and used wood are a great place for bargain.

I built my workbench out of $5 of scrap wood by buying a homemade platform that had been used for judging volleyball games, because no one else wanted a volleyball judging platform and I was willing to break it apart and cart away a couple hundred pounds of lumber.

I recently purchased a good quantity of rough cut maple, locust and oak for around 10-25 cents a board foot from another auction because the owner of the woodshop in question was retiring and everything must go.

Re:Why software engineers like woodworking by david38 on Friday June 10, 2022 @12:04AM (#31689899)
Truth. You can buy wood, used cabinet saw, used thickness planer, used jointer, all for about the same price of my dining table.
Re:Why software engineers like woodworking by jahewson on Thursday June 09, 2022 @10:21PM (#31689278)
I can’t buy wood at wholesale prices unfortunately. Assuming they have any decent wood at all.
Re:Why software engineers like woodworking by mc32 on Thursday June 09, 2022 @10:43PM (#31689391)
They say if you have an Amish mill nearby, they tend to be cheaper and a 2x4 is 2"x4".
Re:Why software engineers like woodworking by fest on Friday June 10, 2022 @03:35AM (#31691203)
From what I've heard- 2x4 is actually closer to 1.5x3.5" /s
Re:Why software engineers like woodworking by andreareina on Friday June 10, 2022 @05:59AM (#31692020)
And even then you'll probably need to plane it if you need flatness/uniformity.