How bad is my gas stove?

Re:How bad is my gas stove? by KennyBlanken on Saturday January 15, 2022 @08:34AM (#29946206)

I have an induction cooktop and my cast iron pans have been terrible. Cast iron has lousy heat conduction and induction stoves do not have even distribution. They negate a lot of the benefits of induction, which is the ability to put a massive amount of heat into the pan very quickly.

High carbon steel pans (the kind used by kitchen services) have been brilliant. Every time I've seen an induction cooktop in use in a commercial service (for example, at my work place cafeteria at the "rice meal" station) they use high carbon steel pans.

The biggest problem: no cooking during power outages, which happen around 2-3x a year.

[ Parent | on HN ]

Re:How bad is my gas stove? by samwillis on Saturday January 15, 2022 @08:54AM (#29946336)

Surprised to hear you have had a bad experience. We use stainless still pans for all the normal sized pans. It’s large pots/casserole dishes/Dutch ovens we have in cast iron and they work really well. We also have an cast iron skillet that is great, gets very hot very quickly.

All our cast iron is Le Creuset.

[ Parent | on HN ]

Re:How bad is my gas stove? by derbOac on Saturday January 15, 2022 @10:09AM (#29946873)

I thought that was the point of cast iron though? Heat batteries basically: long time to heat up, but then you have a lot of constant heat energy.

Cast iron has never been quick on any type of stovetop.

I agree about carbon steel though. Underappreciated although gaining more attention.

[ Parent | on HN ]

Re:How bad is my gas stove? by IdoRA on Saturday January 15, 2022 @10:41AM (#29947164)

You do need to be careful using carbon steel on induction, at least until you get the hang of it: the instant heat makes warpage easy to encounter, especially if the coil is undersized relative to the pan (US portable hobs have tiny diameter coils).

[ Parent | on HN ]

Re:How bad is my gas stove? by rsfern on Saturday January 15, 2022 @09:03AM (#29946392)

> I have an induction cooktop and my cast iron pans have been terrible. Cast iron has lousy heat conduction and induction stoves do not have even distribution.

That’s interesting, can you compare the heat distribution problem to resistive? I have a gas range now, but when I had resistive I would preheat my cast iron in the oven for nice uniform heat distribution

[ Parent | on HN ]

Re:How bad is my gas stove? by prometheus76 on Saturday January 15, 2022 @08:57AM (#29946354)

"Cast iron" and "high carbon steel" are the same thing by different names, so I'm a little confused by your comment.

[ Parent | on HN ]

Re:How bad is my gas stove? by SAI_Peregrinus on Saturday January 15, 2022 @09:36AM (#29946638)

High carbon steel has less carbon than cast iron. Cast iron contains substantial amounts of Ledeburite, while steel contains none or at most negligible Ledeburite inclusions.

https://upload.wikimedia.org/wikipedia/commons/8/8a/Iron_car...

[ Parent | on HN ]

Re:How bad is my gas stove? by rsfern on Saturday January 15, 2022 @09:09AM (#29946433)

They’re not quite the same, cast iron generally has a higher carbon composition range and a different phase distribution. Cast iron has a much lower thermal conductivity

[ Parent | on HN ]

Re:How bad is my gas stove? by hexane360 on Saturday January 15, 2022 @10:08PM (#29952887)

>Cast iron has a much lower thermal conductivity

I thought this was true (it makes some sense), but the data seems to show the opposite. This source has cast iron at 52 W/m-K, and 1% carbon steel at 43 W/m-K (0.5% carbon steel is at 54 W/m-K). Now, this obviously depends a lot on the processing and heat treatment of each material. But at the very least, the difference is not massive.

https://www.engineeringtoolbox.com/thermal-conductivity-meta...

[ Parent | on HN ]

Re:How bad is my gas stove? by rsfern on Sunday January 16, 2022 @08:22AM (#29955789)

Interesting, thanks!

I guess most of the reputation of cast iron comes from the chunky shapes of the pans, and that the higher end stainless cookware is often cladding around copper core

[ Parent | on HN ]