News for hackers. Stuff that matters.
Re:Two startups tried to catch up to makers of advanced comp... by seanmcdirmid on Sunday January 09, 2022 @09:31PM (#29869907)
Economical and performant chip and jet turbine production are two areas where China can't really take any shortcuts. They have to put in a lot of time and resources to rediscover closely guarded secrets that are almost impossible to reverse engineer. They are dumping in the resources, so I'm sure they will eventually get there, but it might be a few decades (in both fields, they can already do performant or economical, just not both at the same time).
Re:Two startups tried to catch up to makers of advanced comp... by bsder on Monday January 10, 2022 @07:19PM (#29885213)
NO manufacturing line is easily transplantable or built from scratch. This is not limited to semiconductors.

My favorite story about this is a paint manufacturer building a brand new, state-of-the-art manufacturing facility to increase their capacity. Everything was controlled, monitored, etc. to the nth degree.

Only one problem--paint from the new line no longer stuck to anything.

Cue a crash debugging with all hands on deck. The problem? The new line was too clean.

Paint relies on the correct ends attaching to the wall and then the other ends forming a kind of network to protect those. But there is a tradeoff--the outer paint surface (exposed to elements) vs the inner paint surface (attaches to the wall) have different needs. If you make the inner paint surface too dense (molecules all vertical) the paints sticks great, but then doesn't protect against the elements. If you make the outer paint surface dense (molecules all horizontal) then the paint protects well, but then won't stick to the wall.

The solution: add some "dirt". Adding some very fine, very small inert particles can change the angle that the paint molecules connect and fix the adhesion issues.

The lesson: nobody knows all the things necessary to run a manufacturing line. Ever.

Re:Two startups tried to catch up to makers of advanced comp... by amboar on Tuesday January 11, 2022 @06:45AM (#29890319)
Ah, here's the circuit design equivalent of that story: https://twitter.com/dave_universetf/status/14734753486542684...
Re:Two startups tried to catch up to makers of advanced comp... by bfung on Monday January 10, 2022 @05:57PM (#29884174)
I suspect some or most of this secret sauce is more like institutional knowledge and not one single person knows how the whole system works (to produce high quality chips at scale). Or maybe there IS one person, but that’s the CEO/founder, haha.

Regardless, it’s similar to software companies claiming to run agile, but always reverting to the “get it done, waterfall deadline” mode. It takes good effort and detailed knowledge of pitfalls to avoid to actually make a less intuitive, but more repeatable and productive process work. (Agile’s been around for over 10years and people still don’t do good versions well)

Re:Two startups tried to catch up to makers of advanced comp... by kodemager on Monday January 10, 2022 @06:32PM (#29884646)
> Agile’s been around for over 10years and people still don’t do good versions well)

Agile software development has been around since the early 90’ies. Scrum is from something like 1995.

The reason people fail to implement it so often is that project management sort or doesn’t work in software development, and it doesn’t work because you can spend two hours looking for a spelling error or a missing semicolon, and you can create Godlike code in half an hour, and you never know which mode you’re going to be in when you get up in the morning.

Waterfall doesn’t work either, for the same reason, and for all the adaptive reasons that lead to agile.

The best way to deal with it is to take the methods that make sense for your current project and run with that. 99% or the time that’s a kanban board, and maybe some time registration software if you’re unfortunate enough to work in a place that bills by the hour.

The worst part about the project management methods in my personal opinion is that they all want to sell themselves as the universal solution, in a world where no two projects are alike but you also can’t be bothered to have 90 different project models in an organisation, because then what’s the point.

Re:Two startups tried to catch up to makers of advanced comp... by chopin on Tuesday January 11, 2022 @05:40AM (#29889801)
In my experience agile mostly fails because of unrealistic management expectations: Deliver a given set of features in time and quality. Especially C-Suite and one level below has this expectation with no idea what agile really means. From there, it trickles down...
Re:Two startups tried to catch up to makers of advanced comp... by AceJohnny2 on Monday January 10, 2022 @08:21PM (#29885826)
> and it doesn’t work because you can spend two hours looking for a spelling error or a missing semicolon, and you can create Godlike code in half an hour, and you never know which mode you’re going to be in when you get up in the morning.

That's ADHD (maybe modulo some external factors like scattered meetings)

Re:Two startups tried to catch up to makers of advanced comp... by webmaven on Monday January 10, 2022 @09:48PM (#29886731)
> That's ADHD (maybe modulo some external factors like scattered meetings)

That doesn't seem like ADHD to me. Getting to a super-productive flow state is notoriously difficult to do reliably for everyone, and getting stuck on a stupid typo you can't find even though you know it is somewhere in the 50 lines of code you're looking at is likewise a fairly common experience.

Folks with ADHD may actually be better at achieving a hyperfocused state of flow, but the flip side of that isn't hunting for a typo, it is falling down a rabbit hole of yak-shaving, procrastination (productive or otherwise), and other distractions.

Somewhere in between is the experience of trying to hold more and more context in your head at once, resulting in a feeling like your brain has been pummeled and leaking out your ears, staring at some code that has become entirely illegible. This can be the result of ADHD-driven yak-shaving, but more commonly is the result of needing to comprehend huge chunks of a badly architected system before you can make a change with any confidence.

Re:Two startups tried to catch up to makers of advanced comp... by webmaven on Sunday January 16, 2022 @02:47PM (#29959268)
Coming back to this comment after a few days, I find that what I was trying to say with the last bit is that yak-shaving can be either intrinsic (ADHD) or extrinsic (badly architected, deeply intertwingled code with leaky abstractions).
Re:Two startups tried to catch up to makers of advanced comp... by inter_netuser on Monday January 10, 2022 @08:50PM (#29886137)
I can assure you the CEO would be the last person to know how the whole system works, in case of semiconductor chips, to the detail sufficient to reproduce it again from scratch should the entire company suddenly resign somehow.
Re:Two startups tried to catch up to makers of advanced comp... by WalterBright on Monday January 10, 2022 @07:33PM (#29885357)
My grandfather figured out how to grow large haloid crystals, which were used in camera polaroid Carl Zeiss "Bernotar" filters. He kept the process a secret, which died with him.

My family gets contacted now and then by researchers trying to figure out how to do it.

Re:Two startups tried to catch up to makers of advanced comp... by balsam on Monday January 10, 2022 @09:29PM (#29886548)
Wait, Bernauer is your grandfather? He was killed in the war..
Re:Two startups tried to catch up to makers of advanced comp... by WalterBright on Monday January 10, 2022 @10:38PM (#29887175)
Yes, on my mother's side. He was too old for the draft, but got pressed into the Volkssturm (old men and boys) to defend Berlin, and was mortally wounded in it.

Two pictures I have of him, one with a telescope the other with a microscope. Both sides of my family were nerds :-)

He also led a team to Iceland in the 1930s to set some surveying markers to determine if Iceland was expanding, which would prove the continental drift theory. After the war, other researchers went back and confirmed it. I'm kinda sad he died before completing this, and so others got the credit for continental drift.

Re:Two startups tried to catch up to makers of advanced comp... by mensetmanusman on Monday January 10, 2022 @07:49PM (#29885511)
So interesting! Any pictures?
Re:Two startups tried to catch up to makers of advanced comp... by WalterBright on Monday January 10, 2022 @08:09PM (#29885708)
Re:Two startups tried to catch up to makers of advanced comp... by bcrl on Monday January 10, 2022 @07:59PM (#29885608)
Indeed, there is no free lunch. Just look at Intel's missteps on their 10nm process. There's a company with decades of experience building semiconductors and $77 billion in revenue last year that took close to 4 years to recover from initial mistakes with their transition from their 14nm process to a 10nm class process. If Intel has that much difficulty, just imagine how many orders of magnitude harder it is for a small upstart without all of that institutional experience and resources to recreate that process step from scratch.
Re:Two startups tried to catch up to makers of advanced comp... by kurthr on Monday January 10, 2022 @08:15PM (#29885768)
Well, to be fair their 10nm is everyone else's 7nm and they were trying to do it without DUV litho, for reasons?

However, their style of process/chip design is very hierarchical with HUGE teams to get the implementation out in the 3-4year cycles (there are multiple overlapping teams). This was driven over the successes of decades of scaling. Then it failed. Now they are behind. If they had been able to pivot early they might be parallel with rather than behind TSMC, but they couldn't admit it wasn't working. The large group structure got in the way.

We'll see if they can fix it.

Re:Two startups tried to catch up to makers of advanced comp... by bcrl on Monday January 10, 2022 @08:44PM (#29886053)
I do wonder at what point Intel will no longer be able to function being the sole source of products running through their own fabs. Companies like TSMC can amortize the cost of fab construction and process development over a much larger swath of the electronics industry. Combined with the fact that Intel no longer has Apple as a customer for new products, they could be facing enormous change by 2030. AMD couldn't support their own fab, and I think that's still a risk factor (albeit much smaller than it was for AMD) for Intel if the cost of new fabs keeps going up by factors of 10 or more every generation.
Re:Two startups tried to catch up to makers of advanced comp... by bvaldivielso on Monday January 10, 2022 @05:44PM (#29883968)
Interesting. What about hiring people from the leading companies? Isn't that how a lot of knowledge transfer happens in all industries? Are non-competes enforceable internationally?
Re:Two startups tried to catch up to makers of advanced comp... by eightysixfour on Monday January 10, 2022 @06:37PM (#29884715)
Knowing that you fire microdroplets of tin with a specific shape into a chamber at 50khz and hit it with two laser pulses is one thing, doing it is an entirely different one.

How EUV works: https://youtu.be/5Ge2RcvDlgw

Re:Two startups tried to catch up to makers of advanced comp... by tablespoon on Monday January 10, 2022 @05:56PM (#29884157)
> Interesting. What about hiring people from the leading companies? Isn't that how a lot of knowledge transfer happens in all industries?

Maybe it's not that easy. I have no knowledge of semiconductor manufacturing (let alone advanced semiconductor manufacturing), but it strikes me as one of those areas that might have thousands of very specialized crazy hard problems that all need to be solved just right to get things working. If you hire away some guy from a leading company, at best he might have a thousandth of that company's solution (and maybe that thousandth of a solution is only valuable in a path-dependent context with all the other solutions that leading company followed).

> Are non-competes enforceable internationally?

Doubt it. Though I suppose in some cases disclosing trade secrets for advanced technology my violate other laws.

Re:Two startups tried to catch up to makers of advanced comp... by webmaven on Monday January 10, 2022 @10:13PM (#29886957)
> (and maybe that thousandth of a solution is only valuable in a path-dependent context with all the other solutions that leading company followed).

Yeah, that's a real obstacle, not much of a "maybe" about it.

I have a feeling that this, more than any other factor, is what is driving large-scale international tech IP theft. You have to grab stuff wholesale in hopes of either (a) teasing out isolated nuggets that happen to be applicable to your own efforts, or (b) recreating the surrounding path-dependent context (which doesn't have a well-defined boundary) in order to have a working solution.

Re:Two startups tried to catch up to makers of advanced comp... by post_from_work on Monday January 10, 2022 @07:07PM (#29885082)
On some other forums/blogs that I follow, there are Turkish information operations guys who post about the triumphs of the Turkish defence industry. Their lead guy says that Turkish companies are throwing million-dollar salaries at experienced American engineers with things like aerospace experience. Take that statement with a pound of salt. But I did look at a few Turkish companies that seemed to be hiring foreign expertise, and their domestic arms industry has grown by leaps and bounds in the past decade, despite their broad economic problems.
Re:Two startups tried to catch up to makers of advanced comp... by 1cvmask on Monday January 10, 2022 @07:22PM (#29885236)
They don’t pay high salaries to foreigners at all. In fact they lose local engineers to foreigners, especially the likes of Airbus, who poach them. Their only success stems from US and foreign unofficial embargoes and sanctions which has forced them to produce domestically. Turkey used to produce airplanes even in the 1940s which were then shut down by US allied governments.

https://istanbultarihi.ist/578-the-nuri-demirag-aircraft-fac...

Re:Two startups tried to catch up to makers of advanced comp... by carabiner on Monday January 10, 2022 @05:56PM (#29884145)
Stuff like this isn't just trade secrets, in the US it's often ITAR-controlled and requires a security clearance. There are CFD algorithms that are classified. If you possess this information and plan to move to (or even visit) China, I imagine US immigration will look at you very closely and not simply allow you to leave to go work for Chengdu Aerospace Corporation.
Re:Two startups tried to catch up to makers of advanced comp... by tablespoon on Monday January 10, 2022 @06:01PM (#29884229)
> If you possess this information and plan to move to (or even visit) China, I imagine US immigration will look at you very closely and not simply allow you to leave to go work for Chengdu Aerospace Corporation.

I don't think the US border control system works like that. If you're a citizen, you never need an exit visa. IIRC, as long as you have a valid passport, you can exit and enter as you please, but if there's probable cause to suspect you of a crime they can arrest you.

China's system, on the other hand, does work like that. IIRC, anyone with any authority or access to secrets isn't allowed to have free control over their passport, and they have systems for denying people exit permission.

Re:Two startups tried to catch up to makers of advanced comp... by r00fus on Monday January 10, 2022 @06:41PM (#29884766)
Do you actually understand how this works or are you theorizing? The no-fly-list exists. Security clearances are tracked.
Re:Two startups tried to catch up to makers of advanced comp... by stickfigure on Monday January 10, 2022 @06:51PM (#29884885)
Anyone who has been through civics 101 in the US knows this. Unless there is a warrant out for your arrest, the US government cannot stop a US citizen from leaving the country.

Even if somehow you got on the no-fly list, you can take a boat. Or drive/walk across one of the land borders. Perfectly legally.

Security clearances are a red herring. The folks working in Intel/TSMC/TI/etc fabs don't have or need security clearances. This is private technology.

Re:Two startups tried to catch up to makers of advanced comp... by bigbillheck on Monday January 10, 2022 @08:02PM (#29885639)
> Anyone who has been through civics 101 in the US knows this

Anyone who has been through civics 102 in the US knows that there's lots of ways to get your passport taken away, and without one you're not getting far. It looks like Canada's requiring either passports or fancy drivers licenses (only available from some states), and Mexico's at least as strict.

Re:Two startups tried to catch up to makers of advanced comp... by tablespoon on Monday January 10, 2022 @10:48PM (#29887276)
> Anyone who has been through civics 102 in the US knows that there's lots of ways to get your passport taken away...

But that's irrelevant unless one of those ways is to "possess [ITAR-controlled and requires a security clearance] information," as one of the ancestor comments stated. If that's actually the case, someone should be able to cite law/regulation or provide examples of the practice, but no one has.

Re:Two startups tried to catch up to makers of advanced comp... by pyuser583 on Monday January 10, 2022 @10:41PM (#29887200)
Folks with security clearances need to inform their employers about any travel plans. If the plans are suspicious, they can lose their clearance.

But they won’t be stopped at the border. They might be fired when they return though.

Re:Two startups tried to catch up to makers of advanced comp... by ivan_gammel on Monday January 10, 2022 @05:52PM (#29884084)
I doubt it is that easy thing to do. What would motivate some key researcher to move from USA/Europe to China to work on stuff that they have already done instead of exploring new frontiers? Hardly any money can buy that. Ego? Maybe few people from the wishlist will take a new job title, but you need the entire list.
Re:Two startups tried to catch up to makers of advanced comp... by divbzero on Monday January 10, 2022 @06:45PM (#29884823)
On top of that, doesn’t one of the leading companies have foundries in China already? Presumably that would be a source for poaching talent.
Re:Two startups tried to catch up to makers of advanced comp... by chadcmulligan on Monday January 10, 2022 @10:46PM (#29887255)
TSMC has some older tech plants but planning more advanced plant it seems https://focustaiwan.tw/business/202107300008
Re:Two startups tried to catch up to makers of advanced comp... by 2OEH8eoCRo0 on Monday January 10, 2022 @06:15PM (#29884447)
Leaders in their field usually do not want to live under a totalitarian communist government.
Re:Two startups tried to catch up to makers of advanced comp... by nefitty on Monday January 10, 2022 @06:21PM (#29884508)
When the dude from Alibaba got disappeared for a few weeks, I said to myself, "Well, I won't be starting my next trillion dollar business there."
Re:Two startups tried to catch up to makers of advanced comp... by post_from_work on Monday January 10, 2022 @07:12PM (#29885137)
Shit, I won't even go there to study kung fu! A few years back I was considering studying Bajiquan ( https://www.studymartialarts.org/school/an-wushu-internation... ), and even then, back before they started detaining random Western businessmen as spies, I figured being an ex-military officer would probably be an unnecessary risk.
Re:Two startups tried to catch up to makers of advanced comp... by ffwszgf on Monday January 10, 2022 @08:03PM (#29885647)
If you pay them enough most people don’t care. Chinese companies routinely poach Japanese talent in car manufacturing and Taiwanese talent for chips.
Re:Two startups tried to catch up to makers of advanced comp... by pixl97 on Monday January 10, 2022 @06:07PM (#29884315)
What about doing it the old fashion way and just stealing said information?
Re:Two startups tried to catch up to makers of advanced comp... by nwiswell on Monday January 10, 2022 @06:10PM (#29884360)
At least for semiconductors a lot of the magic is distributed tribal knowledge among engineers and the sophisticated equipment used to fabricate the devices (all major suppliers are in the US, Europe, and Japan). So theft is not really a complete solution, although it can help.
Re:Two startups tried to catch up to makers of advanced comp... by klipt on Monday January 10, 2022 @06:47PM (#29884842)
So if there were a war and the existing equipment got bombed, the world would basically be set 10 years behind on computing?
Re:Two startups tried to catch up to makers of advanced comp... by nwiswell on Monday January 10, 2022 @06:52PM (#29884902)
> basically be set 10 years behind on computing

That probably overstates the case a little bit since capacity is distributed around the world, but in some sense yes.

It's not particularly hypothetical. If China (PRC) was to invade Taiwan, that would potentially knock out a frightening proportion of the world's leading-edge capacity.

Re:Two startups tried to catch up to makers of advanced comp... by 0000011111 on Monday January 10, 2022 @06:59PM (#29884993)
China launched more rockets to orbit than any other country last year. They make not take short cuts. But they do catch up quickly in terms of development.
Re:Two startups tried to catch up to makers of advanced comp... by seanmcdirmid on Monday January 10, 2022 @07:50PM (#29885519)
Rockets are pretty simple compared to jet turbines, rocket production doesn't have as thick of a moat as jet turbine production.

> Developing jet engine is not an easy game unlike rocket engines as it's comparatively very compact in size & it requires advance engineering to develop it's crystal blades technology & maintain it's thrust to weight ratio & that's what make jet engine technology one of the most complicated technology.

From https://defenceview.in/how-difficult-is-it-to-build-an-jet-e...

Re:Two startups tried to catch up to makers of advanced comp... by jhgb on Tuesday January 11, 2022 @08:41AM (#29891321)
Rocket engines are to jet engines basically what paper utensils are to porcelain. But with transition to reusable rocket stages, chances are that the "disposable" designs will get more complex if that extra complexity gets justified by not throwing away the whole unit after several minutes of operation.

> Developing jet engine is not an easy game unlike rocket engines as it's comparatively very compact in size & it requires advance engineering to develop it's crystal blades technology & maintain it's thrust to weight ratio & that's what make jet engine technology one of the most complicated technology.

That's a terribly worded and nonsensical claim (and almost reads like it was written by a ten year old). How could someone claim that rocket engines are "not very compact in size"? The RD-180 turbopump for example generates 170 MW of mechanical power, much more than any jet engine in operation, and in a smaller package to boot. Likewise, the HPFTP on the RS-25 generates around 50 MW of mechanical power, and does so in a package sized 0.55m by 1.1m or something like that.

Re:Two startups tried to catch up to makers of advanced comp... by inter_netuser on Monday January 10, 2022 @08:48PM (#29886111)
why are they impossible to reverse engineer?

especially in case of jet turbines, due to their much larger size than chips?

Re:Two startups tried to catch up to makers of advanced comp... by prewett on Tuesday January 11, 2022 @12:55AM (#29888094)
I expect it is because jet turbine blades need to be precisely shaped to maximize proper airflow; spin around so fast that the shear forces destroy most materials; operate in an environment so hot that it melts most materials (which does not help with the shear forces, I expect); and be as lightweight as possible. Some blades have channels on the inside to run cool air through them to cool them down so they don't melt. I wonder if the egress of the air may be used to help keep the flow laminar, I thought I read something about that in experimental airplane wings. So you have fluid dynamics for the shape and a serious limitation in available materials. I know fluid dynamics is a bit of a black art, and I expect that metallurgy is somewhat similar. Especially at 2000 deg C and 3500 - 25,000 RPM!

Even once you have the blade to copy, you don't know why the features are the way they are. What bits are important? Which areas must have high tolerance? After that, there is the question of how to make it. You probably cannot just mass spectrometer it, put those ingredients in a vat, heat it up, and pour it into a mold. Is the order of ingredients important? The exact ratios? How quickly do you cool it? At what temperature? And how do you get those holes in it? How do you do it economically? You can't just 3D print these, and even if you did, it'd be way too slow.

Re:Two startups tried to catch up to makers of advanced comp... by selimthegrim on Tuesday January 11, 2022 @02:11AM (#29888511)
I think they are also formed from single crystals
Re:Two startups tried to catch up to makers of advanced comp... by acchow on Monday January 10, 2022 @07:30PM (#29885313)
> but it might be a few decades

They could just hire the experts from the incumbents

Re:Two startups tried to catch up to makers of advanced comp... by 300bps on Monday January 10, 2022 @07:46PM (#29885491)
The article said that’s exactly what they did from CEO to engineers and they still failed.

HSMC attracted a former top TSMC executive as chief executive. QXIC recruited dozens of experienced engineers from Taiwan, including from TSMC, with relatively big pay packages, according to former employees.

Re:Two startups tried to catch up to makers of advanced comp... by mensetmanusman on Monday January 10, 2022 @07:52PM (#29885548)
I wonder if they were playing both sides, ie getting a ton of money from China and TSMC to just lead them astray :)
Re:Two startups tried to catch up to makers of advanced comp... by kelnos on Monday January 10, 2022 @07:49PM (#29885515)
Assuming they'll agree to work for them. I imagine many of the people who hold the secret sauce (especially from TSMC) wouldn't work for a Chinese company. I was surprised they managed to hire a former TSMC executive to head up one of the (now failed) companies.

Then again, there may be no "secret sauce" in the way we usually think about it. You might have to hire hundreds of people from an incumbent to pull in enough institutional knowledge to get things going. And even then it's not going to happen overnight.

I feel like the right people to hire, at any rate, aren't the executives. You need the right engineers, scientists, and researchers.

Re:Two startups tried to catch up to makers of advanced comp... by seanmcdirmid on Monday January 10, 2022 @07:47PM (#29885498)
The process/material knowledge is actually pretty easy to keep under lock and key. No one knows the formula, or the key is in the equipment that whose production is strictly controlled. They need to get access to the all of the knowledge all at once, not just bits and pieces of it.
Re:Two startups tried to catch up to makers of advanced comp... by bsedlm on Monday January 10, 2022 @05:37PM (#29883875)
> They have to put in a lot of time and resources to rediscover closely guarded secrets that are almost impossible to reverse engineer

yes, they have to repeat all that work, they have to solve all those solved problems again because companies that solved the problems won't share their solutions.

Re:Two startups tried to catch up to makers of advanced comp... by hguant on Monday January 10, 2022 @05:48PM (#29884028)
>they have to solve all those solved problems again because companies that solved the problems won't share their solutions.

...because those solutions are the company's competitive advantage that China has tried to steal for years on end now? Not to mention in many instances those 'solutions' are owned by or access controlled by the parent country of said company, many of which view China as at the least a bad faith actor, and at the worst an inevitable opponent?

Pretending China hasn't engaged in the world's largest industrial espionage campaign over the last two decades, and then victim blaming the companies involved for not "sharing their solutions" with China is a perverse form of logic.

Re:Two startups tried to catch up to makers of advanced comp... by jeffreyrogers on Monday January 10, 2022 @05:45PM (#29883990)
Why would a company share its trade secrets? It's one of the few differentiators left to most companies. Not to mention the national security arguments.
Re:Two startups tried to catch up to makers of advanced comp... by bsedlm on Monday January 10, 2022 @06:14PM (#29884440)
> Why would a company share its trade secrets?

indeed, I wish I could answer this.

> Not to mention the national security arguments.

it is an inteserting excercise to consider this from the rival's point of view

Re:Two startups tried to catch up to makers of advanced comp... by jhgb on Monday January 10, 2022 @06:43PM (#29884795)
The rival's point of view is utterly irrelevant.
Re:Two startups tried to catch up to makers of advanced comp... by bsedlm on Tuesday January 11, 2022 @09:32AM (#29891825)
that's a terrible tactic. consider as an example playing chess while disregarding what your opponent may do.
Re:Two startups tried to catch up to makers of advanced comp... by seanmcdirmid on Monday January 10, 2022 @07:52PM (#29885553)
Not just companies, but the Russians were pissed after China copied some of their jet military tech. They were angry enough that they stopped supplying them with military jet turbine parts for awhile, which really tripped things up for the Chinese because they can't produce their own at the same level (they can make fast, they can make economical, but they can't make both yet).