News for hackers. Stuff that matters.
Re:Monitoring my home's air quality with AirGradient's DIY s... by rtkaratekid on Wednesday September 08, 2021 @12:24PM (#28459382)
What sensor are you using? Just curious.
Re:Monitoring my home's air quality with AirGradient's DIY s... by tpmx on Wednesday September 08, 2021 @12:46PM (#28459670)
For DIY, there was a pretty good discussion on suitable sensors in the AirGradient post from three months ago that Jeff linked to:

https://news.ycombinator.com/item?id=27125060

tl;dr: seems like you want an NDIR sensor (https://en.wikipedia.org/wiki/Nondispersive_infrared_sensor).

Some options, with digikey @1 prices:

Senseair S8 (Sweden): $48

Sensirion SCD30 (Switzerland): $63

Amphenol Telaire T6713 (US): $96

If I were to buy an expensive black box iot solution, I'd at least verify that it had an NDIR sensor.

Re:Monitoring my home's air quality with AirGradient's DIY s... by s0rce on Wednesday September 08, 2021 @02:03PM (#28460842)
I'm using an SCD41 with an OLED+microcontroller (using Sensirion's example code hacked a bit) and it seems to work well, cheaper than the NDIR using some photoacoustic magic.
Re:Monitoring my home's air quality with AirGradient's DIY s... by tpmx on Wednesday September 08, 2021 @02:18PM (#28461056)
$37 @1, but not in stock at digikey, and an 11 week lead time.

It's pretty tiny... I wonder if/when it will be possible to put a high quality co2 sensor in an IP68 iPhone...

Re:Monitoring my home's air quality with AirGradient's DIY s... by s0rce on Wednesday September 08, 2021 @04:56PM (#28462947)
I had purchased the dev kit sek-scd41 but its out of stock as well. The SCD41 also does RH and T so you don't need a separate sensor for that.
Re:Monitoring my home's air quality with AirGradient's DIY s... by macNchz on Wednesday September 08, 2021 @12:59PM (#28459870)
I'm using an Awair Element, I didn't do a ton of research on alternatives, but the app is pretty good and it "just works".
Re:Monitoring my home's air quality with AirGradient's DIY s... by tclancy on Wednesday September 08, 2021 @07:50PM (#28464472)
Like you, and for the same reasons, I recently bought an Awair. At the risk of a derail, one thing I have been thinking about ever since: when I played D&D as a kid, they said the difference between Intelligence and Wisdom was, "Intelligence is knowing that it's raining, Wisdom is knowing to go inside." How much of these things are adding to our intelligence without adding to our wisdom? I am now constantly aware of particulates and everything else it cares to send me alerts about (which I will soon shut off) but how much better off am I once I established my air quality is basically Very Good.

The problem with all this "intelligence" is the Internet is very good at showing you search results for what you want to see, so Googling "Should I be worried about fine particulates" is a search destined to turn your anxiety into a full-blown panic attack.

No idea what the answer is, and I am impressed with the level of effort that went into the Awair app, but it would be nice to have more reasonable context in all IoT devices. Yeah, I know.

Re:Monitoring my home's air quality with AirGradient's DIY s... by macNchz on Thursday September 09, 2021 @12:44AM (#28466288)
I definitely see where you’re coming from. When I first got it I was freaked out by the frequent spikes of VOCs, before determining that it’s actually hypersensitive to farts. I’ve come to ignore most transient fluctuations and just use VOCs/CO2/PM as guides for when to open or close the windows.

I’ve also found that regularly glancing at the 5 minute resolution charts of just temp and humidity has helped me get a better sense of my own comfort range…for example I like to run my AC as little as possible in the summer, but I’ve learned that playing chicken with the heat is foolish beyond 81F as I only wind up sitting at my desk grumpy and unproductive.

Re:Monitoring my home's air quality with AirGradient's DIY s... by newfonewhodis on Wednesday September 08, 2021 @04:47PM (#28462849)
I've been thinking of getting it what are your thoughts on longevity of it? Will it last at least a few years? I also see in some Amazon reviews that measurements get "stuck" to some extreme. Have you noticed that too?
Re:Monitoring my home's air quality with AirGradient's DIY s... by richardfontana on Thursday September 09, 2021 @12:09AM (#28466105)
I've had an Awair Element for about 16 months. The only time I've experienced what you may mean by "stuck" measurements was about a month ago, when PM2.5 was puzzlingly and worryingly at a consistently higher than usual level for a couple of days. Trial and error eventually suggested that there was a piece of dust stuck in the sensor or something like that. Upon blowing on the sensor, the measurement returned to normal.
Re:Monitoring my home's air quality with AirGradient's DIY s... by macNchz on Thursday September 09, 2021 @12:23AM (#28466167)
After a year I don’t see any issues with it, the sensors don’t seem to have drifted or changed in their responsiveness at all. It has crashed once or twice and stopped responding but was fine after a power cycle.

With any IoT device I’m wary about longevity re app support, I can’t say how long Awair will support this device or whether they’ll provide access to it after they stop, but I’m less concerned for a device like this vs, say, a major appliance.

Re:Monitoring my home's air quality with AirGradient's DIY s... by karmelapple on Wednesday September 08, 2021 @01:08PM (#28460013)
To add to the list of sensors: I was most curious in CO2 levels, so I got an Aranet4: https://www.amazon.com/dp/B07YY7BH2W/ref=cm_sw_r_cp_api_glt_...

It’s got an eink screen, and I haven’t had to recharge it since I got it 8 months ago. I really like it.

Re:Monitoring my home's air quality with AirGradient's DIY s... by Robotbeat on Wednesday September 08, 2021 @02:01PM (#28460811)
Are there any affordable CO2 sensors that don’t use outside air for calibration of ppm? I want to know how outside air CO2 levels change as well. Would be interesting to see day to day changes and how big they are in absolute terms. (Also to show people about how CO2 levels are changing globally… without just pointing to a website of someone else’s measurements.)