News for hackers. Stuff that matters.
Re:What I know about cleaning and seasoning cast-iron skillets by ChuckMcM on Wednesday July 28, 2021 @05:04PM (#27989683)
I appreciate where you are coming from but I have seen cast iron that folks "did what they wanted with it" and it wasn't pretty. From rusted through holes to massive pitting that made them food safety nightmares.

My point being that, as with any tool, there are practices that will limit the lifetime of the tool and eventually render it unfit for its intended purpose. Learning about the best practices for using a tool can help avoid that fate.

Re:What I know about cleaning and seasoning cast-iron skillets by i_am_proteus on Wednesday July 28, 2021 @05:17PM (#27989831)
My experience, as long as you cook with plenty of fat each time, the pan gets a kind of a re-season when you cook with it, and it'll hold up to most kinds of cleaning.

People who don't cook with plenty of fat, they have problems.

Re:What I know about cleaning and seasoning cast-iron skillets by schuke on Wednesday July 28, 2021 @08:31PM (#27991438)
Exactly. It’s pretty normal for Chinese families to boil or steam with iron wok and then wash with liquid soap. Many cook for years without knowing iron wok can rust. I guess it’s because the main dishes here are mostly high-temperature sir-fries. On the other hand, when I started to reduce fat consumption and cooking temperature, my wok began to rust pretty quick.
Re:What I know about cleaning and seasoning cast-iron skillets by raxxorrax on Friday July 30, 2021 @07:31AM (#28006810)
I mean as long it is not a special alloy, eating iron rust is completely harmless.
Re:What I know about cleaning and seasoning cast-iron skillets by ChuckMcM on Wednesday July 28, 2021 @05:22PM (#27989894)
Agreed, we typically put about 1/2" of water in them, bring it to a vigorous boil, pour it off and then wipe down the pan with a few drops of olive oil.
Re:What I know about cleaning and seasoning cast-iron skillets by smegger001 on Wednesday July 28, 2021 @06:56PM (#27990808)
in my experience that's fine as long as you don't cook a lot of acidic food in it or a short period of time, like simmering tomatoes multiple days in a row and end up eating the seasoning off the bottom of the pan. (curry with a tomato base one day, spaghetti sauce the next, and then more for some south western dish i don't recall, it ate all the seasoning and had to completely re-season it)
Re:What I know about cleaning and seasoning cast-iron skillets by gtvwill on Wednesday July 28, 2021 @05:32PM (#27990017)
Season it with flaxseed oil and you won't need the fat.
Re:What I know about cleaning and seasoning cast-iron skillets by wnissen on Wednesday July 28, 2021 @06:16PM (#27990461)
I tried that, multiple very thin coats, and it all flaked off down to bare metal. Flaxseed is too hard. Regular old canola oil works great. I make scrambled eggs in mine when we go camping. I got a nice, food-grade flaxseed oil.

The other myth is that the pebbly surface is non-stick. I used to work at a casting plant, that's the natural finish from sandcasting. That doesn't mean it's functional. Sanding down the casting surface to a smooth working surface takes less than an hour and lasts a lifetime.

Re:What I know about cleaning and seasoning cast-iron skillets by gorgoiler on Thursday July 29, 2021 @03:39AM (#27993914)
This isn’t seasoning. This is painting on a layer of polymerised oil. You may get good results but it’s a different technique to fully saturating the iron with liquid oil.

Heating while you do it makes a convection pattern that hinders the process. Air drying for a few days between coats works better but, again, traditional seasoning by regularly oiling (using) the pan is more trad for iron / steel.

For oak though, drying oils that produce a polymerised surface make a fantastic finish. Add thistle oil, sunflower oil and soya oil to your flaxseed (linseed) oil, or just buy this:

https://osmouk.com/product/uv-protection-oil/

Re:What I know about cleaning and seasoning cast-iron skillets by wiz21c on Thursday July 29, 2021 @07:39AM (#27995287)
Is this polymerisation thing a proven fact ? Is this chemically right ? I saw that quite often but nobody ever sounded like a chemist, so I'm a little scared of burning oil in my cookware...
Re:What I know about cleaning and seasoning cast-iron skillets by wiether on Wednesday July 28, 2021 @05:43PM (#27990122)
Isn't flaxseed oil... fat ?
Re:What I know about cleaning and seasoning cast-iron skillets by kbutler on Wednesday July 28, 2021 @06:32PM (#27990603)
The point is to have the pan well-seasoned, which requires fat but doesn't add (significant?) fat to your food, then it doesn't take as much fat to keep the food from sticking.

Some users claim flaxseed oil is the ideal oil for seasoning cast iron, as it is a drying oil w/ a high smoke point. https://www.cooksillustrated.com/how_tos/5820-the-ultimate-w... Others claim the "drying oil" is an incorrect theory, and that the polymerized oil from a drying oil is a coating that would flake off, rather than the desired bonding with the cast iron.

Re:What I know about cleaning and seasoning cast-iron skillets by joe_guy on Wednesday July 28, 2021 @08:55PM (#27991567)
At least in woodworking, curing oils that don't have metallic driers added to them, take about a month to cure.

100% Tung oil, and (not boiled) linseed oil are the ones I'm aware of.

I have no information using them on cast iron.

Re:What I know about cleaning and seasoning cast-iron skillets by mauvehaus on Thursday July 29, 2021 @07:06AM (#27995083)
Point of order: linseed oil is flax oil. The flax plant is where we get the fibers that become linen. Linen seed -> linseed.

There are a couple other drying oils, but my understanding is that they're more used in oil painting than wood finishing [0].

Also note that modern boiled linseed oil is not the same as the historic product, which as I understand it, was made by boiling linseed oil with white lead. The modern stuff is partially polymerized by heating it in the absence of oxygen.

Disclaimer: I am not a chemist or finish chemistry expert. I'm just a woodworker who sometimes reads about this stuff. Bob Flexner is an excellent author for anybody interested in further reading.

[0] http://www.cad-red.com/mt2/oil.html

Re:What I know about cleaning and seasoning cast-iron skillets by joe_guy on Wednesday July 28, 2021 @09:06PM (#27991641)
But perhaps the pans temperature matters.
Re:What I know about cleaning and seasoning cast-iron skillets by etrautmann on Wednesday July 28, 2021 @05:59PM (#27990290)
You have to bring it above smoke point until it polymerizes into a hard layer that stays on the pan and makes it anti stick
Re:What I know about cleaning and seasoning cast-iron skillets by amluto on Wednesday July 28, 2021 @06:32PM (#27990605)
If you actually take flax oil and heat it, you end up with a very attractive layer that is neither hard nor nonstick.
Re:What I know about cleaning and seasoning cast-iron skillets by klyrs on Wednesday July 28, 2021 @05:54PM (#27990238)
100% fat
Re:What I know about cleaning and seasoning cast-iron skillets by KozmoNau7 on Wednesday July 28, 2021 @05:48PM (#27990178)
Been there, tried that. It's based on faulty observations and conclusions, and results in a fragile seasoning that flakes off easily.

Matfer Bourgeat and De Buyer both recommend frying up a batch of potato peels in plenty of oil and too much salt, until the peels are very dark. Doesn't matter which kind of oil, salt or potatoes. Move them around and scrub them on the pan with your spatula while frying. When done, clean the pan with hot water.

Then just use the pan. The only things you really shouldn't do are soaking it or putting it in the dishwasher. Simmering acidic foods like tomato sauce is not great, but also not the end of the world.

The biggest contributing factor to make food not stick is to properly preheat the pan and not be afraid of oil/butter.

Re:What I know about cleaning and seasoning cast-iron skillets by denton-scratch on Thursday July 29, 2021 @08:30AM (#27995645)
I have successfully seasoned two cast iron pans with flax oil. That was 6 layers, baked on, and it was 15 years ago. The seasoning is still solid, doesn't flake, and is pretty much non-stick. If your flax oil seasoning is flaking, I think you are probably using too much oil - after oiling and before baking, you need to wipe off as much oil as you can; the pan shouldn't glisten at all.

I also have a De Buyer carbon-steel pan, which I tried to season the same way; total failure. I had to strip off the failed seasoning. I now just use it with fat, clean it with hot water and detergent, and dry it carefully. All is good.

Re:What I know about cleaning and seasoning cast-iron skillets by KozmoNau7 on Thursday July 29, 2021 @11:13AM (#27997508)
Please don't assume that I don't know what I'm doing, that's very impolite.

I seasoned the pan exactly as recommended: Very clean pan, stripped of previous seasoning, super thin layers of oil, barely visible on the surface, heat for 1 hour, cool for 1 hour, then repeat oil and heat/cool. And I used high-quality fresh flaxseed oil, not some old oxidized stuff.

It's a complete waste of time, when frying up some potato peels takes ~15 minutes and gives a sturdier result. It may not be as pretty or uniform, but it works, and how cast iron/carbon steel pans are prepared in every professional kitchen I know of. They don't have time to faff about, seasoning pans doesn't pay the bills. Cooking does.

Re:What I know about cleaning and seasoning cast-iron skillets by p1necone on Wednesday July 28, 2021 @06:13PM (#27990442)
> The biggest contributing factor to make food not stick is to properly preheat the pan and not be afraid of oil/butter.

Yep, even a standard stainless steel pan will not stick to much if you get it up to temp beforehand and use some fat.

Re:What I know about cleaning and seasoning cast-iron skillets by scarmig on Wednesday July 28, 2021 @05:10PM (#27989753)
I googled some pictures, and yeah, that's appalling. I just have no idea how it happens. I have abused my Lodge cast iron for the better part of a decade and it's totally fine.

Perhaps a lot is implicit in my "within reason" that some people willfully violate.

Re:What I know about cleaning and seasoning cast-iron skillets by xyzzyz on Wednesday July 28, 2021 @05:18PM (#27989854)
I suppose putting them through a dishwasher cycle, then putting them into pantry dry with no oil, and then leaving it there for a few weeks would be one way to get there.
Re:What I know about cleaning and seasoning cast-iron skillets by throwawayboise on Wednesday July 28, 2021 @05:41PM (#27990104)
The nice thing is that no matter what you do, they are pretty much recoverable by cleaning, possibly sanding, and re-seasoning.
Re:What I know about cleaning and seasoning cast-iron skillets by ChuckMcM on Wednesday July 28, 2021 @06:40PM (#27990675)
This is so true. I picked up a "ruined" cast iron griddle for free at a garage sale and used a surface grinder on it to get back to the metal, re-seasoned it, and now its the camping griddle.
Re:What I know about cleaning and seasoning cast-iron skillets by morsch on Thursday July 29, 2021 @03:48AM (#27993966)
I think the food safety concerns are a bit exaggerated. I guess you could get some sort of mold in there. Most safety concerns are alleviated because the pan is presumably heated through regularly on account of it being a pan. Maybe I suffer from a lack of imagination regarding the magnitude of the pitting.