Re:DIY microscope lenses on BMD pocket 6K camera
by amelius on Thursday March 11, 2021 @04:03PM
(#26428976)
If you're photographing stills (like PCB components) then you might as well use a smaller aperture and increase the exposure time to get an image that is globally in focus.
[ Parent
| on HN ]
Re:DIY microscope lenses on BMD pocket 6K camera
by devb on Thursday March 11, 2021 @04:40PM
(#26429332)
This only works up to a point before diffraction sets in and the picture quality starts to very noticeably suffer, and comes nowhere close to the depth of field acquired with focus stacking. In fact, with stacking, the lens should be stopped down to the best f-stop anyway (f/8-11).
Re:DIY microscope lenses on BMD pocket 6K camera
by namibj on Friday March 12, 2021 @01:35AM
(#26432781)
Good (Vis/NIR) microscope optics go up to f/0.56 (NA 0.9) without oil immersion.
Granted, such an objective will cost you 3.5k$ [0], but they don't go to these lengths without expecting near-diffraction-limited performance.
[0]: https://www.thorlabs.com/thorproduct.cfm?partnumber=RMS60X-P...
Re:DIY microscope lenses on BMD pocket 6K camera
by m463 on Thursday March 11, 2021 @10:22PM
(#26431896)
and then stack those images. :)
Re:DIY microscope lenses on BMD pocket 6K camera
by LegitShady on Thursday March 11, 2021 @06:10PM
(#26430209)
with very wide apertures and magnification the depth of field may still be too narrow, and longer imaging time (if not focus stacking) would just make the image brighter not more in focus. Taking multiple shots with different depth of field and stacking them would work.