The nice thing about larger SMD components is that you can route interconnect between the terminals. This way you get a "free" layer in the form of components.
you can definitely hand solder 0201s without solder paste, if you have thin solder, a thin tip (on your soldering iron) and decent magnification. I have successfully done 01005s with this method.
Re:Cheap PCB story
by imtringued on Friday February 19, 2021 @07:07AM
(#26192235)
Hand soldering 0201s and anything above is trivial. The problem is that managing components gets harder and harder the smaller they are. I did two practice kits and the problem is that I lost two 0201s out of 10 and couldn't find them.
Re:Cheap PCB story
by kube-system on Thursday February 18, 2021 @01:52PM
(#26183911)
I really like using a USB microscope for taking a close look at PCBs. They're pretty cheap, free up a hand, and you can put the picture on a large monitor.
Re:Cheap PCB story
by nerfhammer on Thursday February 18, 2021 @02:18PM
(#26184226)
pro-tip: your phone's magnifier app can be used as a perfectly good digital scope, you just need something to hold it up with.
ios: Settings > Control Center > Customize Controls > Magnifier
I much prefer soldering 0402 and 0201 components than larger SMD parts, including 0603. What's needed is soldering paste, liquid flux and heatgun and macro lens attached to a phone for inspection.
What's nice with hot air soldering tiny SMD components is that you don't need a lot of heat when soldering, desoldering and get zero tombstoning.