That said, while it's a completely and utterly different area, I've actually now experienced my first hybrid using equipment just a few weeks ago and it was pretty interesting: the latest Black Diamond avalanche airbag (JetForce Tour 26L). Avalanche airbags are now quite common safety tools for heavy snow back country or mountaineering, and in an avalanche can help keep a person from being completely buried (or at least keep them much much shallower). Fundamentally, they need to extremely rapidly inflate a significant volume with gas or air on demand, with long term reliability in standby, and while being part of a human portable backpack carrying other stuff and thus as light as feasible. It doesn't take much absolute energy, but inflating in a couple of seconds does take a huge amount of power.
The original ones used compressed air or small explosives, which obviously are consumable and present problems traveling by commercial air. They're also harder to test/practice with. Electric fan models came about like 5-6 years ago, but extremely high instantaneous power demands in this application meant big fat lithium ion batteries which are fairly heavy. Fine in a car, not so man portable.
The JetForce uses Alpride's E1 supercap design fan. The supercap can be charged off of USB or just a single pair of AA batteries in the field, and can hold charge for a good 2-3 months. It shaves a solid couple of pounds off the previous lithium ion design.
Anyway, niche application but it was pretty neat to me anyway to see some real practical gains come about from newer supercap work. I'll be curious if hybrid designs continue to make inroads in other places characterized by sharp power spikes with less overall energy demand.
If one could do both, that might be nice. But cutting charging time while maintaining most of the range makes more sense than having acceleration bursts to the wheels that never make it to the road.
It would be a buffered input to the battery no matter where the energy comes from.
http://st.motortrend.ca/uploads/sites/42/2017/02/2017-Tesla-...
The fastest braking from 60-0 is 16 meters (53 feet), according to https://fastestlaps.com/lists/top-quickest-stoppers-60mph
Using the physics calculator at https://www.calculatorsoup.com/calculators/physics/uniformly...
This gives a deceleration of 22.5 m/sec^2, or about 2.3 g.
I'm amazed it can go above 1 g, actually.
Years ago in Denver when they had F1 racing, I remember a news story about preparations the city had to do for the race, which included welding down the manhole covers. Because the amount of suction these cars make would pull the manhole covers off as cars drove over them.
Also, traction is more than just friction. There's a mechanical component to it, the scraping off of the rubber from the surface of the tire.
Also, as far as the 53 feet goes, remember that this car was extremely light, 1400lbs. The Tesla Model S weighs almost 5Klbs for comparison.
https://en.wikipedia.org/wiki/Chaparral_Cars#2J
Two fans adapted from a military tank engine were housed at the rear, driven by a single two-stroke twin-cylinder engine.
...
The skirting produced a zone within which the fans could create a vacuum producing downforce on the order of 1.25 to 1.50 G when the car was fully loaded
Maybe this sort of thing will make a comeback :)
That downforce drops to zero long before the car stops.
>Also, as far as the 53 feet goes, remember that this car was extremely light, 1400lbs. The Tesla Model S weighs almost 5Klbs for comparison.
It doesn't matter how much something weighs... the kinetic energy scales linearly with weight. The F-16 fighter can pull 9gs, and it weighs 20,300 lbs.
>It doesn't matter how much something weighs
Stopping distance is absolutely, 100%, impacted by the weight of the car.
If you are the driver then being in control probably helps quite a lot. In a roller coaster you are always a passenger.
Also, the power output of Li-ion batteries has gotten so high that the supercapacitors only offer power benefits for marginal use cases.
If you want more power you can just put more batteries in parallel. Or use batteries with lower resistance (the flat ones).
As for gathering bursts of energy; Again the problem is energy capacity. The (potential) energy released by braking really hard is really high (per time).
You could use a flywheel battery for that. They can take it. They are even used in roller coasters just for that purpose (granted they use big flywheels).
Considering people usually break "softly", it is just not worth it.
EVs already use their friction brakes pretty rarely, so the potential gains aren't even that big.
This means that EVs of all kinds, could not only get crazy acceleration, but could also recover all the energy of regen. Even battery packs with a very good layout can absorb a fraction of the acceleration energy, and less or none when the battery is cold or at the upper range of capacity.
I remember reading an article about a porsche in a car magazine (many) years ago that discussed not the horsepower for acceleration but also the horsepower absorbed by the brakes to decelerate.
It might have been 500 horsepower to accelerate the car, but since the brakes were very good, it could absorb 900+ horsepower when bringing it to a halt.