News for hackers. Stuff that matters.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by graeme on Tuesday February 02, 2021 @08:27AM (#26000681)
The better question is why aren’t we ventilating. It is justifiable to clean high contact surfaces as a precaution.

But this is like optimizing the last 2%. The most important thing other than masks and distancing would be opening windows, installing air purifiers that kill viruses, and setting hvac’s to bring in outside air. Co2 meters could be used to gauge effectiveness.

One year in official guidelines in most cases don’t mention ventilation and in some workplaces people are forbidden from ventilating because it isn’t in the guidelines.

We’d be a little chilly or a little warm, but the virus would spread much less readily.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by Someone1234 on Tuesday February 02, 2021 @08:37AM (#26000786)
Because most of it was "COVID theater" rather than intended to actually make people safer, the public cannot see the [likely more effective] things you're suggesting.

Same thing with checking temperature at the door (it doesn't work because people can either never get a fever or be infectious before/after one).

Even when it comes to masks we still have very few of the public using well fitting N95 and manufacturers mass-producing masks that barely even cover the side of people's faces (i.e. they don't work as well as they could, even for cloth!).

This was totally forgivable in the early days since "better than nothing" masks, but it has been almost a year and effective mask/mask usage still isn't being promoted nor guidelines for producing high quality masks exists.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by matthewmacleod on Tuesday February 02, 2021 @08:48AM (#26000887)
Same thing with checking temperature at the door (it doesn't work because people can either never get a fever or be infectious before/after one).

Attempts to reduce infection do not require 100% success in order to be effective at reducing the transmission rate. If we estimated that say 10% of patients experienced a fever, then a temperature check reduces the number of potential exposures.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by Someone1234 on Tuesday February 02, 2021 @09:07AM (#26001066)
Except it can encourage people to be in public spaces and feel safe doing so.

I've literally had the conversation about going to a mall, and the person responding "but they're doing temperature checks at the doors!" as why it is safe.

The public has been [mis]led to believe that these checks work, and that may be the bigger problem than the checks themselves. I'm all for arguing "the enemy of better is perfect" except when you alter the general-public's behavior into less safe behaviors.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by SpicyLemonZest on Tuesday February 02, 2021 @09:35AM (#26001366)
The problem with these kinds of discussions is that many people are morally scandalized by answers like "the mall is very important to me" or "I'm aware of and accept the marginal risk". So there's a lot of social pressure to come up with reasons why whatever you'd like to do is "safe", and those reasons don't necessarily reflect the actual thought process. Most likely your friend would be going to the mall regardless of what safety measures were in place.

I'm imagining a friend challenging me on whether it's safe to go out to get boba. I might point out that they don't have you wait inside the shop or that I avoid going when there's a long line, but the honest answer is that I really want boba and don't typically think about the risk in this level of detail.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by matthewmacleod on Tuesday February 02, 2021 @09:14AM (#26001141)
Seems like those goalposts have been moved then…

If your argument is that some partially effective measures might have a paradoxically negative effect by encouraging unsafe behaviour, then that seems like a reasonable possibility to explore - and would require some data.

I personally struggle to think of any ways in which my behaviour would become less safe as a result of having my temperature taken when entering a store, but YMMV.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by nucleardog on Tuesday February 02, 2021 @02:01PM (#26005073)
> I personally struggle to think of any ways in which my behaviour would become less safe as a result of having my temperature taken when entering a store, but YMMV.

Literally the example given--people don't feel the need to avoid going to a crowded, indoor space because "they're taking temperatures at the door".

You may not fall victim to this, but it's otherwise a pretty well-known phenomenon with some research:

https://onlinelibrary.wiley.com/doi/abs/10.1111/iere.12402

https://www.journals.uchicago.edu/doi/10.1086/260352

https://www.sciencedirect.com/science/article/abs/pii/S00014...

https://www.sciencedirect.com/science/article/abs/pii/S00472...

https://link.springer.com/article/10.1007/s11127-009-9548-2

Re:Covid-19 rarely spreads through surfaces. So why are we s... by lamontcg on Tuesday February 02, 2021 @03:10PM (#26005932)
> my behaviour

I mean its literally not about you, its about the behavior of crowds and you are one N=1?

Also the people who object to this are generally the kind of people who don't realize how much their own opinions and behavior are molded by these things. If you don't realize that this goes on, and that it is effective, you are more likely to be one of the susceptible ones.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by treeman79 on Tuesday February 02, 2021 @10:34AM (#26002135)
Yea I was shocked how I never got a fever with covid. Maybe a few hours at most. Kids had a fever for one night.

Wife and I were horribly exhausted for a week before any other symptoms showed up. So we just dismissed it as being tired. Even had a negative test during that week.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by matz1 on Tuesday February 02, 2021 @09:03AM (#26001023)
I'm fine with that if those extra measure are downside free. Except they are not, temperature check, mask, etc, incur extra cost, effort, inconvenience, annoyance, etc.

The question is whether its worth it ? For me its obviously No

Re:Covid-19 rarely spreads through surfaces. So why are we s... by Larrikin on Tuesday February 02, 2021 @09:13AM (#26001131)
What covid measures are down side free then? Should just nothing be done and we ramp up deaths for a slight inconvenience?

2 to 5 dollar masks that are proven to significantly reduce spread and a single employee standing outside with a hundred dollar thermometer to make sure no one with obvious symptoms comes in (they're also checking for people coughing as well) seems about as tiny an inconvenience as possible.

It's not 100 percent but we know how it spreads, people that actually need to go out have the ability to get the most effective PPE, and at this point we should be directing our efforts to vaccine distribution instead of improving covid protocols (or worse loosening them prematurely as we vaccinate) for the people bored at home.

[dead]
Re:Covid-19 rarely spreads through surfaces. So why are we s... by Larrikin on Tuesday February 02, 2021 @09:30AM (#26001305)
None of what you believe is based on scientific evidence.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by matz1 on Tuesday February 02, 2021 @09:31AM (#26001322)
how is it not ?
Re:Covid-19 rarely spreads through surfaces. So why are we s... by nucleardog on Tuesday February 02, 2021 @02:25PM (#26005369)
> There is no conclusive evidence that the death is correlated with temperature check/ mask.

https://www.researchgate.net/publication/342198360_Associati...

"Conclusions. Societal norms and government policies supporting the wearing of masks by the public, as well as international travel controls, are independently associated with lower per-capita mortality from COVID-19."

> Maybe the n95 mask can reduce spread but the clothes mask that most people use doesn't do much.

https://pubs.acs.org/doi/10.1021/acsnano.0c03252

Numbers vary across studies and materials, but a mask of a single layer of moderate thread count cotton is 80-100% effective at filtration depending on particle size.

> I know it spread and it spread easily but fortunately for vast majority of case they will be asymptomatic or only have symptoms.

https://hartfordhealthcare.org/about-us/news-press/news-deta...

30% asymptomatic does not a "vast majority" make. More than 1 in 50 infected dying (or 1 in 12 in the cases of countries with significant infections) may not matter to you, but that's something to be avoided for most people. On-going research is continually revealing new long-term impacts of those that recover from the disease.

If you're genuinely asking, there's some reading material. You can find literally dozens of sources refuting each of your claims. If you're not, I'm not really interested in a debate.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by matz1 on Tuesday February 02, 2021 @03:22PM (#26006107)
>"Conclusions. Societal norms and government policies supporting the wearing of masks by the public, as well as international travel controls, are independently associated with lower per-capita mortality from COVID-19."

Fine, still correlation doesn't mean causation

>Numbers vary across studies and materials, but a mask of a single layer of moderate thread count cotton is 80-100% effective at filtration depending on particle size.

The issue is the virus is smaller than the mask pores.

>30% asymptomatic does not a "vast majority"

what i mean is both asymptomatic case + mild symptom combined

> 1 in 50 infected dying

Thats probably for the age 80 or above.

For most people remain, its nothing to be afraid of.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by matthewmacleod on Tuesday February 02, 2021 @09:10AM (#26001098)
It’s not at all obvious and you are simply wrong on this point.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by matz1 on Tuesday February 02, 2021 @09:11AM (#26001113)
How is it wrong?
Re:Covid-19 rarely spreads through surfaces. So why are we s... by matthewmacleod on Tuesday February 02, 2021 @09:20AM (#26001199)
It is not at all obvious. I don’t know how to make it any clearer than that. It might be a theory worth investigating further; you have no basis for claiming that it is obvious, particularly because you lump multiple entirely different methods of mitigation together in a big “obviously not worth it” bucket when they self-evidently have such different characteristics that they cannot be treated in the same way.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by matz1 on Tuesday February 02, 2021 @09:25AM (#26001248)
I said for me its obvious that the downside from the extras measure is greater than the downside from the virus itself.

I didn't say/imply its obvious for you or any other people.

Its a subjective comparison.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by RHSeeger on Tuesday February 02, 2021 @08:54AM (#26000942)
> Same thing with checking temperature at the door (it doesn't work because people can either never get a fever or be infectious before/after one).

But it stops some cases, which is much better than no cases.

> Even when it comes to masks we still have very few of the public using well fitting N95 and manufacturers mass-producing masks that barely even cover the side of people's faces (i.e. they don't work as well as they could, even for cloth!).

Because the unfitted masks significantly reduce the amount of large particulates (ie, saliva) spread into the air, because they're caught by the mask which is directly in front of the mouth/nose.

Arguing that seatbelts shouldn't be used because they don't prevent all injuries doesn't make much sense. Sure, we can do better, but it's not "COVID theater". It's rational, useful actions being taken to mitigate the impact of COVID.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by Someone1234 on Tuesday February 02, 2021 @09:03AM (#26001009)
> Arguing that seatbelts shouldn't be used because they don't prevent all injuries doesn't make much sense.

That's an incredibly disingenuous/uncharitable analogy for what I actually posted. A more accurate one would be:

> Two-point Seatbelts cause massive internal injuries during an accident, why haven't we improved them/the guidelines in producing them after 40+ years? (see period from 1910 to 1960).

Cloth masks were created in a rush to fill a void. Then a year passed. In that year nobody spent time/money improving/researching the design of cloth for better coverage nor did we increase the supply/availability of more effective filter material/fitment.

It is fair to criticize the lack of improvement partially given the urgent public health crisis.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by RHSeeger on Tuesday February 02, 2021 @11:30AM (#26003016)
Only, cloth masks _haven't_ caused massive damage, or even any damage. They've prevented damage, possibly _massive_ damage.

Can we do better? Yes. Are cloth masks useless "theater"? No, not even remotely.

> That's an incredibly disingenuous/uncharitable analogy for what I actually posted

It's really not. It would be disingenuous if it was aimed at one part of your post (we can do better). However, it is perfectly applicable when aimed at the "this is useless" part.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by Someone1234 on Tuesday February 02, 2021 @12:50PM (#26004143)
> Only, cloth masks _haven't_ caused massive damage, or even any damage.

I think you replied to the wrong comment/comment chain, it said nothing even ballpark like that. The word "damage" doesn't appear in the comment chain aside from this comment.

> Are cloth masks useless "theater"?

Again, this wasn't something anyone in the comment chain claimed.

> However, it is perfectly applicable when aimed at the "this is useless" part.

That quote is a fabrication. The word "useless" doesn't even appear in this comment chain aside from this post/quote.

So when you're creating fake quotes and making multiple baseless claims (quite literally putting in words/quotes that don't exist), it is the epitome of disingenuous.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by RHSeeger on Tuesday February 02, 2021 @01:25PM (#26004622)
> The word "damage" doesn't appear in the commen

I was "converting" from _injuries_ (in relation to seat belts) to _damage_ (in relation to masks) as the closest parallel I could make. My apologies that it wasn't clear.

----

>> Are cloth masks useless "theater"?

> Again, this wasn't something anyone in the comment chain claimed.

I was grouping the comment about how most of what had been done was "COVID theater" and the comment about masks together. The overall post read, to me, in a way that made it sound like the former also applied to the later. That may not have been intended.

----

>> However, it is perfectly applicable when aimed at the "this is useless" part.

> That quote is a fabrication.

It's another wording for part of the original post. The double quotes were intended to indicate the grouping/meaning, not the actual words. I've been using ">" where something is an actual quote, which is generally standard for text communication, but I can see where it might be confusing to someone not used to it.

> most of it was "COVID theater" rather than intended to actually make people safer

That statement, I believe, comes across very clearly as presenting a lot of what was done as useless.

----

I'm going to stop on this thread, as replying to multiple individual blocks of text (as I have done here) tends to be a sign that things have either gotten off topic or people are going to stop caring.

The high level summary of what I originally meant was that I believe the steps we are taking are very useful, but agree we should be doing more.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by ivankolev on Tuesday February 02, 2021 @10:26AM (#26002020)
Re:Covid-19 rarely spreads through surfaces. So why are we s... by sandworm101 on Tuesday February 02, 2021 @09:05AM (#26001035)
>> But it stops some cases, which is much better than no cases.

Any test that gives a false sense of security may cause people to do things that they otherwise should not, such as travel. Spot temperature checks are not effective but doing them at airports makes people feel safer. Safe-feeling people travel more, spreading more virus.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by maxerickson on Tuesday February 02, 2021 @09:01AM (#26000994)
They aren't arguing that cloth masks are useless, rather that they should not be the standard.

Following the car analogy, it's like not stopping at seat belts and adding airbags and traction control and so on. The improved measure (high quality masks) is inexpensive enough that it should be the standard.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by cactus2093 on Tuesday February 02, 2021 @09:08AM (#26001082)
I think the comment you’re replying to was saying covid theater is the cleaning and temp checks, not the masks.

As for masks, I still see people wearing bandanas and scarves all the time, and my understanding is these are much less effective than even a simple surgical mask. I think your bar is much too low, sounds like you’re saying as long as we’re doing more than nothing that’s good enough.

There’s no excuse almost a year in that there exist masks which are significantly more effective than what most people are wearing and we’re making no effort to encourage people to use them.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by RHSeeger on Tuesday February 02, 2021 @11:35AM (#26003075)
> I think your bar is much too low, sounds like you’re saying as long as we’re doing more than nothing that’s good enough.

That's not what I meant, and I'm sorry if it came off that way. What I meant was that we're doing a number of different things that aren't perfect... and I constantly see people complain about it not being perfect so why are we doing it... and my response is that every little bit helps. I agree that we can and should be doing more. I just think saying what is being done now is mostly useless theater is ridiculous and dangerous, and results in people not bothering to take even basic precautions "because it doesn't help".

Re:Covid-19 rarely spreads through surfaces. So why are we s... by rattray on Tuesday February 02, 2021 @09:22AM (#26001217)
Speaking as the creator of a high-quality mask (eye protection, good seal, >99.99% viral filtration efficiency filters), the lack of guidelines on what makes for a good mask have been flabbergasting. And what is there is incredibly lackluster - usually nothing very good on how to check your seal, or about eye protection, or about ensuring your filters are still any good on a disposable mask.

I honestly can't believe that at this point in the pandemic, full-face respirators haven't been adapted to have exhale filters and widely distributed. I think our product (https://narwallmask.com) is still the only such device, and I'm just some software engineer who thought to do something.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by AstralStorm on Tuesday February 02, 2021 @11:28AM (#26002977)
Probably because hospital staff are the ones who would afford it and truly benefit. Maybe some patients there. It's probably too late for most of them.

Single use masks are much easier, but indeed there's a lot of mask-like products that have enough leakage to let a tank through, or have an unfiltered vent which is unacceptable.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by MakeUsersWant on Wednesday February 10, 2021 @09:21AM (#26089461)
I found you while researching how to verify a mask is good as an end-user, because I cannot get a good seal out of any of the six types of FFP2-masks I have tried. On the one hand, I've always been on the lookout for something similar. On the other hand, there are a few showstoppers that keep me from buying.

* Looks. Even if I can decide to look like the Reddit alien in a motorcycle helmet while everybody else is wearing an FFP2 mask, there is no way I can persuade my wife or kids. Would it be possible to make the exhaust pipe a bit more inconspicuous? E.g. inhale from the left cheek, exhale to the right cheek?

* Filtration efficiency and trust. There is a reason the FFP2/FFP3 standards test with 0.3um sized particles - those are the most difficult to filter out. Your marketing copy talks about 0.4um and 0.1um, and the headline screems about 3um large virus particles, which are even less relevant. Even though the 0.4um numbers look close to FFP3, any official certification is missing. Is it safe to say that your product does not meet the FFP2 standards?

Additionally, I'd love a mask that does not saturate out within minutes if I am panting (from chasing after kids).

https://fixthemask.medium.com/the-standards-for-face-masks-i...

* Sizing. How do I know which size I need? Maybe you could publish a guide like the CPAP mask manufacturers do. https://www.resmedshop.de/media/pdf/b1/e4/06/ResMed-AirFit-F... https://www.resmedshop.de/media/pdf/03/b0/57/ResMed-AirFit-F...

* Facial expressions. If you could make the mouth covering transparent, it would show my mimics in a conversation. That could be a killer feature, especially for socializing (or salesy jobs).

* Glasses and field of vision.

* Sticker price shock. Most FFP2/KN95 masks are counterfeit and none have a good seal, so I might as well grab the ones for $0.17 a piece from aliexpress. But, I am already spending much more on other Covid safety measures.

EDIT: Can you give me an accessible way to experience the mask's safety? So far, the best criterion I have come up with is if I can smell the smoke when I'm standing next to a smoker. In defense of that metric: There are absolutely no credible alternatives proposed on the internet. Mask fit used to be tested officially with noxious smoke. Cigarette smoke particles are pretty close in size to the virus-laden droplets. But in practise, an FFP2 mask passes this test only if I tape over all of its edges with a band-aid, and my skin won't tolerate that day-in day-out.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by rattray on Wednesday February 10, 2021 @09:40AM (#26089704)
Thank you for the thorough feedback!

Ultimately, most of this comes down to your risk tolerance - how much is quality covid protection worth to you? I agree that looks are more likely to be the barrier there than $85, which as you mentioned is high relative to cheap disposable masks but low relative to how bad covid is. Regarding looking weird, I can only point to our product reviews where users consistently find that they are, to their surprise, not treated like aliens: https://narwallmask.com/products/narwall-mask#reviews

Re; filtration, we link to a test data sheet showing that the filter material is tested by Nelson Labs, a major lab testing company. I'm not sure where you get the 0.4um or 1um numbers from - the particle size we test to is 0.1um, and the viruses used in Nelson Labs' VFE testing are much smaller than that (google "Nelson Labs VFE").

Back in the 70s or so, they thought 0.3um was the most difficult size particle to filter, which is why the standards test for that; since then, studies have shown that 0.1um is actually slightly more difficult, but everything in that range is near the bottom of the parabolas and tends to be very close.

I can try to link to some papers on this later but I'm on mobile right now.

Our size guide is next to the size selector on our website; I'll try to make that easier to find.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by MakeUsersWant on Wednesday February 10, 2021 @10:08AM (#26090110)
Thanks for your reply. I've elaborated some in the grandparent. I am willing to pay for quality once it is rigorously demonstrated.

The safety issue comes down to this paragraph in your FAQ:

What is the filter material and how is it tested? Our filters are made in the USA with material tested to >99.997% VFE (viral filtration efficiency) by Nelson Labs. Another metric is PFE (particle filtration efficiency). The N95 standard for 0.3-micron PFE is >95.00%, while Narwall's filter material is tested to >99.50% 0.1-micron PFE. You can learn more about these particle sizes here.

The way I read it, you test for 3um (VFE is that according to https://fixthemask.medium.com/the-standards-for-face-masks-i...) and 0.1um, but not 0.3um. I'd be happy if you could point me to papers that those two sizes cover 0.3um and saturation issues.

Is there some kind of independent verification of efficacy and safety of the whole device, not just the mask?

As a minor point - the sticker price is closer to $820 (4 persons times mask and 6 months of filters and international shipping).

I am legally required to wear a medical-grade mask (FFP2 or surgical). Do you have an official-looking document to show to the authorities?

Re:Covid-19 rarely spreads through surfaces. So why are we s... by rattray on Wednesday February 10, 2021 @10:53AM (#26090810)
From the article linked:

> Bacteria ~ 3μm while viruses ~0.025μm in diameter

However, SARS-CoV-2 is estimated to be around 0.1um, per https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7224694/#:~:tex....

> SARS-CoV-2 is an enveloped virus ≈0.1 μm in diameter

Making the 0.1μm measure more relevant.

Ultimately, it's up to your judgement whether to determine these filters are likely to be at least as useful as alternatives, bearing in mind that a poor seal/fit (which you may get with other masks) reduces effective filtration by quite a bit.

Apart from the aforementioned testing of our filter material, and the third-party fit tests (https://narwallmask.com/#h:testing), the CDC's National Personal Protective Technology Laboratory, under NIOSH, is currently assessing the mask but has yet to release results.

Another option you could pursue is a half-face elastomeric respirator with a surgical mask securely taped over the exhale valve, coupled with tight-fitting goggles. It may be less convenient and may or may not achieve the aesthetic properties you seek, but those masks have been around long enough to be evaluated by government bodies for their ability to protect the wearer (though, not the public).

Re:Covid-19 rarely spreads through surfaces. So why are we s... by rattray on Wednesday February 10, 2021 @11:00AM (#26090913)
Responding to your edit, yes, we do provide a simple way to evaluate the mask's safety on your person; a negative pressure test: https://narwallmask.com/pages/usage-guide#h:negative-pressur...

This makes it easy to tell that you have a complete seal.

The fact that your existing masks do not pass without tape indicates that you do not have a seal, and the filtration numbers you're seeing are reduced by many percentage points (eg; from 95% to 90% or lower) as air enters the mask unfiltered through the sides.

I have not performed the cigarette test myself, and haven't seen information indicating it is a reliable covid test, but you are certainly welcome to try it with a Narwall! I'd be keen for your results, and could provide a discount in exchange for the information.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by MakeUsersWant on Sunday February 14, 2021 @06:25PM (#26137292)
For me, the Narwall's main value proposition beyond a standard FFP2 respirator is a super tight seal. Smoke is probably the best proxy I can test that with.

Would you be open to a full refund if I order it and can still smell cigarette smoke?

Re:Covid-19 rarely spreads through surfaces. So why are we s... by rattray on Monday February 15, 2021 @09:39AM (#26143122)
Would a negative pressure test suffice? (See our website). Smoke may have a false negative, as odorants are many times smaller than the target challenge particles.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by MakeUsersWant on Monday February 15, 2021 @11:32AM (#26144232)
Unfortunately not. There is a huge safety difference between a negative pressure test ("fit check" below) and a test with an actual aerosol ("qualitative fit test"). All of the FFP2 respirators I have checked pass one and fail the other. I am hoping the Narwallmask can fill this gap.

From https://associationofanaesthetists-publications.onlinelibrar...

Due to the associated time and costs, some health officials propose the elimination of fit testing and advocate that a fit check is sufficient in determining respirator fit [39]. The NIOSH conducted a study that demonstrated protection of N95/FFP2 masks improved from 67% without fit testing to 96% with fit testing [40]. Subsequently, NIOSH determined fit check alone to be insufficient and fit testing should be mandatory when selecting filtering facepiece respirators or elastomer half mask respirators.

Three studies that included 1111 Asians assessed the ability of fit check to detect leak determined by a quantitative fit test [36, 41, 42]. Average (range) sensitivity and specificity of the fit check to correctly detect leak were 26 (14–40)% and 79 (58–92)%, respectively, and consequent average (range) fit test pass rate following ‘successful’ fit check was 56 (34–73)%. Another study found the protection factor of filtering facepiece respirators increased from 3.3 to 20.5 when comparing the results of the entire test panel with those who had passed the fit test [32]. However, non‐fitted filtering facepiece respirators are still likely to provide greater protection than surgical masks, with a measured protection factor of 1.2 (Table 1) [32].

In summary, while fit check remains recommended before each use of any respirator to ensure fit on a day‐to‐day basis (Grade 1C evidence), we recommend not to use fit check as a substitute for fit testing to identify the size and shape of respirator that fits best (Grade 1B evidence).

Re:Covid-19 rarely spreads through surfaces. So why are we s... by rattray on Monday February 15, 2021 @08:32PM (#26149937)
Thank you, I hadn't seen this!

For what it's worth, I think we provide tools to perform more accurate fit checks than are possible with other masks, but of course I don't have data to back that up, and this is a situation that warrants caution.

You can perform a standard fit test (eg; with Bitrex) with a Narwall, by the way, or a home-jury-rigged one, like this customer did: https://cdn.shopify.com/s/files/1/0264/5311/4970/files/Tim-s...

The smoke check sounds like a great idea too, I just can't confirm that it will produce a true result for Narwall since we haven't specifically evaluated that methodology.

Even if we can't accept a full return because the mask has been tried on, we always offer partial refunds at least when a customer isn't satisfied for any reason, if that's any help.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by kumarvvr on Tuesday February 02, 2021 @09:02AM (#26000997)
I find it infuriating that temperature check is still used everywhere.

It is a known fact that temperature in a body may not show upto 6 days from onset of the virus.

It creates a false sense of safety and is dangerous.

And half of those non contact thermometers are useless. And moat of the personnel dint even know how to use them.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by darkerside on Tuesday February 02, 2021 @08:41AM (#26000831)
They're continuing to say we shouldn't wear N95 masks, to save them for healthcare workers. This has always seemed to me like a short-sighted and reactive approach, instead of proactively starving the supply of infected people by masking up everybody.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by bluGill on Tuesday February 02, 2021 @09:04AM (#26001025)
the problem is N95 masks are not available. Hospitals are still rationing them to doctors who are dealing with COVID patients. That is those with the greatest need/risk cannot get a N95 mask. There is some supply coming online, but it is slow.

Note that KF94 and KN95 masks are somewhat available, I'd recommend my friends use them, but not my friends' friends as supply isn't enough to cover the friends of my friends. These are the Korea and Chinese equivalent to N95, perhaps not as good, but still a lot better. There is also a European standard, but I haven't seen it anywhere in the US.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by gwittel on Tuesday February 02, 2021 @09:35AM (#26001365)
IIRC KF94 were designed as an easier to make general population mask in event of a pandemic (after SARS etc). It wasn’t meant to match N95 (or Korea’s equivalent), but to get close.

Ideally the US would have an equivalent, or have encouraged manufacture of one long ago, but we all know how that went.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by 93po on Tuesday February 02, 2021 @09:54AM (#26001608)
Apparently KN95 isn't as good for preventing liquid transmission (I assume this is important in surgeries) but KN95 is just as good if not a little better protection against aerosoled covid.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by ashtonkem on Tuesday February 02, 2021 @10:25AM (#26002005)
The fact that the DPA wasn’t invoked to spin up N95 mask production early last year has a real “crimes against humanity” feel to it.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by account42 on Wednesday February 03, 2021 @05:32AM (#26012399)
Yeah, Taiwan got that right - they had the military help with mask production even before any other country considered that this might spread beyond China.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by graeme on Tuesday February 02, 2021 @08:42AM (#26000840)
I don’t think that’s all of it. I live in a region that eliminate the virus locally (nova scotia). They deeply care about success and have taken effective measures.

....but they still largely focus on deep cleaning rather than ventilation! And they emphasize the six foot rule in their contact tracing.

I think the true explanation has to do with first impressions. People seem to have stuck on whatever they first heard in Feb-April. And it is harder for an institution to change its mind than for an individual.

On masks, for example, I think the mantra of “masks protect others, they don’t protect you” has stuck even though other types of mask also filter incoming air. People just don’t update their beliefs too easily.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by AstralStorm on Tuesday February 02, 2021 @11:22AM (#26002884)
Funny thing, the most effective measure we found in addition to masks is the careful installation of plexiglass or similar panes similar to face shields, at cash registers and other public facing counters. Next, hand disinfectant or gloves.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by etothepii on Tuesday February 02, 2021 @08:32AM (#26000733)
My friend made a website about it, https://openyourdamnwindows.com
Re:Covid-19 rarely spreads through surfaces. So why are we s... by account42 on Wednesday February 03, 2021 @05:39AM (#26012436)
> It should be too-cold inside. If the heating can cope in winter, then the ventilation is inadequate.

Yeah, no thanks.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by ketamine__ on Tuesday February 02, 2021 @08:49AM (#26000893)
I applaud your friend.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by graeme on Tuesday February 02, 2021 @08:39AM (#26000810)
Great site, thanks!
Re:Covid-19 rarely spreads through surfaces. So why are we s... by numpad0 on Tuesday February 02, 2021 @08:56AM (#26000957)
> air purifiers that kill viruses,

I'm hoping that this is unique to my country but a lot of such "kills virus" products I've seen are a)diluted bleach, or b)ozone generator, or c)UV lamps, none of which is safe near a person and none of which is effective at its job. It was my impression that there's no need to consult 4chan to assess the cost and benefit associated with inhaling bleach.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by _n_b_ on Tuesday February 02, 2021 @09:09AM (#26001088)
Air purifiers with HEPA filters can effectively trap the virus in the filter [1]. Air purifiers with HEPA filters aren't terribly expensive and DIY options are possible (e.g., [2]) although I have also read that this setup is not as efficient at filtering as a purpose-built air filter [3] but also probably much better than nothing.

[1] https://www.nytimes.com/wirecutter/blog/can-hepa-air-purifie... [2] https://www.youtube.com/watch/kH5APw_SLUU [3] https://www.wired.com/story/could-a-janky-jury-rigged-air-pu...

Re:Covid-19 rarely spreads through surfaces. So why are we s... by graeme on Tuesday February 02, 2021 @09:24AM (#26001238)
Oh that’s what I meant thanks. Trap, not kill, my mistake.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by numpad0 on Tuesday February 02, 2021 @09:25AM (#26001250)
Thanks for the link, I guess there’s slight difference between “trap/capture” and “kill”.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by swebs on Tuesday February 02, 2021 @09:29AM (#26001286)
I don't see the downside of UV sanitizers if they're out of sight deep in the ductwork.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by ashtonkem on Tuesday February 02, 2021 @10:22AM (#26001960)
Worse, we seem to be stuck on the idea that being “outside” is the safe thing, so restaurants are now beginning to build “outside” seating with plywood walls and plexiglass windows. Which is to say that they’re building half-assed temporary buildings with no ventilation.

We would’ve been far better off as a society if we’d kept inside dining and improved our HVAC regulations for large gathering areas. It probably would permanently suppress common cold & flu numbers too, since those are also respiratory in nature.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by ketamine__ on Tuesday February 02, 2021 @08:47AM (#26000875)
DoD study suggests it’s very hard to contract COVID-19 on an airplane

https://federalnewsnetwork.com/dod-reporters-notebook-jared-...

Re:Covid-19 rarely spreads through surfaces. So why are we s... by pwinnski on Tuesday February 02, 2021 @09:43AM (#26001474)
I was forced to fly on a plane already this year for a can't-miss embassy appointment. I had read that research, but wore two layers of masks anyway.

I did not catch anything, and in fact, I don't think I'll ever fly on a plane again without a mask, even long after the acute danger of COVID-19 has passed. I physically felt the best I've ever felt while flying!

I was very much aware of airflow on the plane, which seemed really good once we were in the air. Not so much while we were still on the ground.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by ttul on Tuesday February 02, 2021 @10:06AM (#26001751)
> I don't think I'll ever fly on a plane again without a mask, even long after the acute danger of COVID-19 has passed

I bet this will be commonplace.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by IMTDb on Tuesday February 02, 2021 @09:02AM (#26000995)
I read it as: Boeing biggest client telling that Boeing planes are safe to operate when Boeing is in deep financial trouble.

Credits I give to this study: none.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by graeme on Tuesday February 02, 2021 @09:26AM (#26001258)
Ah hominem and conspiracy thinking doesn’t get you very far. There have been few documented transmissions on airplanes.

And I’ve measured CO2 on planes. 800 or less, very impressive for a crowded environment. On the Canadian Via Train it gets up to 3500 ppm!

Since I know these outside facts about planes, it seems likely the study is true. It fits with other data.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by IMTDb on Tuesday February 02, 2021 @11:17AM (#26002794)
I am willing to accept those observation and the conclusion might very well hold under a truly independent study made on a wide range of planes and conditions.

It does not remove the fact that we should not relay observation about health and safety made by teams with significant (disclosed or undisclosed) conflict of interest.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by AstralStorm on Tuesday February 02, 2021 @11:33AM (#26003047)
Furthermore, these measures were specifically introduced to combat the spread. Previously, planes were a cesspool, you were almost guaranteed to catch a cold on a long distance flight. (Every. Time.)
Re:Covid-19 rarely spreads through surfaces. So why are we s... by ketamine__ on Tuesday February 02, 2021 @09:53PM (#26010038)
> Previously, planes were a cesspool, you were almost guaranteed to catch a cold on a long distance flight. (Every. Time.)

Proof?

Re:Covid-19 rarely spreads through surfaces. So why are we s... by joosters on Tuesday February 02, 2021 @09:00AM (#26000988)
And yet, people catch covid on planes. Even the article you cite explains the flaws in the research
Re:Covid-19 rarely spreads through surfaces. So why are we s... by graeme on Tuesday February 02, 2021 @09:27AM (#26001265)
Not very many relative to the number of people on planes. Co2 levels tend to be low on airplanes, indicating good ventilation.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by joosters on Tuesday February 02, 2021 @10:09AM (#26001793)
Not very many relative to the number of people on planes

What does that even mean? Of course the number of people who catch covid on a flight is relative to the number of people on planes. If fewer people fly, fewer people will catch covid, and vv - I think we can all agree on that. A better comparison is between how many will people catch covid on a flight compared to how many would catch it if they didn't fly at all. How many is not many? 1%? 2%?

Re:Covid-19 rarely spreads through surfaces. So why are we s... by graeme on Tuesday February 02, 2021 @11:34AM (#26003070)
What I mean is there have been vanishingly few transmissions linked to airplanes. Those that have occurred to be on very long haul flights.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by gameswithgo on Tuesday February 02, 2021 @08:47AM (#26000876)
There are a lot of things we know would help but are hard to do. Its easy to have employees wipe surfaces at your store, but massively expensive to install some kind of new upward pulling powerful ventillation system.

its easy for a city to close a park down, but hard for a city to tell every bar and restaurant to go out of business, or to pay them to survive while closed.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by bluGill on Tuesday February 02, 2021 @09:10AM (#26001094)
But if we put a good air purifier on each table at a bar/restaurant would that reduce spread enough that people can go out to eat? It doesn't have to be perfect, just statistically enough better that we don't have to lock down quite as hard.

Nobody has done an analysis of this that I can tell even though it is obvious. It seems like a HEPA air filter next to the salt shaker (in the middle of the table so you are generally breathing in its direction) could get a useful fraction of the virus. Then some larger room filters, maybe an upper room UV-C light....

If restaurants are told close or install the above system they will install that system. I know restaurants near me installed tents in the summer which may not have worked much better than the above.

Re:Covid-19 rarely spreads through surfaces. So why are we s... by the-dude on Tuesday February 02, 2021 @08:31AM (#26000722)
In schools for that matter.
Re:Covid-19 rarely spreads through surfaces. So why are we s... by mschuster91 on Tuesday February 02, 2021 @08:39AM (#26000807)
> The better question is why aren’t we ventilating

Industrial places: they have AC but unfortunately the way most if not all of these are built they're germ spreaders rather than germ catchers. Retrofitting or modifying existing installations is expensive and the tradespeople doing this kind of job have been in high demand everywhere since years now.

Schools: same as above - ACs or ventilation in schools exist mostly in new buildings which have had energy efficiency requirements respected during design, retrofitting is often impossible (e.g. due to low room heights), and the "there are no tradespeople" argument from above also applies here, with the added difficulty that government jobs pay pennies compared to what industry puts up. To make stuff worse: many school buildings have outright broken windows - in Cologne / Germany for example one in five schools has windows that don't open, sometimes for many years (https://www.ksta.de/koeln/keine-lueftung-moeglich-trotz-coro...).

Re:Covid-19 rarely spreads through surfaces. So why are we s... by curryst on Tuesday February 02, 2021 @10:13AM (#26001838)
Windows not opening might be intentional. I've worked in a couple of tall buildings where the windows don't open very far. Someone told me it was so people can't jump out, though I always suspected it was so you couldn't mess up the temperature on the floor.