News for hackers. Stuff that matters.
Re:BeagleV – An affordable RISC-V computer designed to run L... by lsb on Wednesday January 13, 2021 @09:59AM (#25762743)
You can get an SD card with 0.5TB capacity on it for USD$30, what storage needs do you foresee? Also these tend to be used where weight is an issue, so, why do you want to lug around a huge disk?
Re:BeagleV – An affordable RISC-V computer designed to run L... by cjbconnor on Wednesday January 13, 2021 @10:07AM (#25762835)
Nearly all SD cards that I've used in Pis and other SBCs have died unpredictably in the past, so I've pretty much given up on using them
Re:BeagleV – An affordable RISC-V computer designed to run L... by megous on Wednesday January 13, 2021 @03:20PM (#25767447)
Using f2fs and setting up the SW on my SBCs to not write data needlessly to SD card all the time (some programs are really bad at this), and having a very high quality power supply and cabling was enough to make my boards work for years on a single SD card. Some are at 4 years currently and still work fine. I'm using Sandisk only, since a few years ago, because it's the only manufacturer that allows me to verify online whether the card I bought is genuine and provides A1 rated cards at the same time. Experience with about 20 boards.
Re:BeagleV – An affordable RISC-V computer designed to run L... by adrianstoll on Wednesday January 13, 2021 @05:56PM (#25769137)
Samsung provides authentication software for their sd cards too.
Re:BeagleV – An affordable RISC-V computer designed to run L... by megous on Wednesday January 13, 2021 @09:57PM (#25771266)
Now that's interesting. I have a few dead samsung uSD cards, that I'd check for genuineness, if possible. I suspect they might have been a cheap clone.

https://www.samsung.com/semiconductor/minisite/ssd/download/...

I guess too little too late. None of the 4 dead Samsung cards I could find have the V mark (too old for that), required for validation, and they probably started adding support for regular EVO cards just a year ago or so.

Re:BeagleV – An affordable RISC-V computer designed to run L... by znpy on Wednesday January 13, 2021 @06:03PM (#25769221)
does it run on linux or do i need windows to run that? because if windows is needed then sandisk can get a chunk of my salary.
Re:BeagleV – An affordable RISC-V computer designed to run L... by megous on Wednesday January 13, 2021 @09:57PM (#25771272)
It's a windows tool.
Re:BeagleV – An affordable RISC-V computer designed to run L... by novok on Wednesday January 13, 2021 @05:14PM (#25768678)
We shouldn't have to do that or special USB boot things that don't integrate well with extra cables sticking out of the form factor.
Re:BeagleV – An affordable RISC-V computer designed to run L... by moftz on Wednesday January 13, 2021 @03:59PM (#25767889)
I have a special SD card made up that has all of the correct boot configs set and a small script to update everything and set up the Pi for PXE boot. After everything is configured, I take out the SD card and let it just pull boot images over the network. My main home server serves everything up over tftp. The only downside is that you can't get this to work over wifi. The wifi Pis get read only SD cards that are all configured the same so it's easy to reimage a new one if the card dies.
Re:BeagleV – An affordable RISC-V computer designed to run L... by wyldfire on Thursday January 14, 2021 @12:34AM (#25772508)
This seemed to be such a frequent problem that I have up on ARM SBCs (despite how cool they are).

Bought a cheap NUC with a disk and a BIOS and it is working like a champ - boots every time. I probably paid a little more but it's enough for my needs - a simple login and (occasional) DLNA server.

Re:BeagleV – An affordable RISC-V computer designed to run L... by richardcrossley on Thursday January 14, 2021 @05:02AM (#25774476)
I bought a cheap used ultra small form factor PC with an i5, 8GB of RAM, all for less than 200 USD. It even included a licensed copy of Windows 7 Pro, which I don't use.
Re:BeagleV – An affordable RISC-V computer designed to run L... by paulcarroty on Thursday January 14, 2021 @03:49AM (#25773836)
NUCs costs much more than Pi, even used.
Re:BeagleV – An affordable RISC-V computer designed to run L... by wyldfire on Thursday January 14, 2021 @07:59AM (#25775805)
It costs more upfront, but it's worth it because I don't have to spend my time investigating why it's not working.

Also, when comparing costs you should take into account things like enclosure, power supply, as card(s) etc.

I'd say I probably paid around $250 or so for the NUC and a SODIMM and I had a SATA boot disk already. I had previously owned ODROID, libre computer (le potato), and Pi(s). These were probably in the ballpark of $80-$120 each, when including all the necessary equipment.

Re:BeagleV – An affordable RISC-V computer designed to run L... by paulcarroty on Saturday January 16, 2021 @04:20AM (#25801141)
Agree on point paid more for features, but x2.5 price is debatable here.
Re:BeagleV – An affordable RISC-V computer designed to run L... by Drdrdrq on Wednesday January 13, 2021 @10:34AM (#25763232)
Same here. I now run them read only.
Re:BeagleV – An affordable RISC-V computer designed to run L... by hajile on Wednesday January 13, 2021 @10:09AM (#25762863)
I suspect they don't necessarily mean spinning platters. A SATA port also allows the connection of an SSD which is almost always a huge boost in usability over SD slots. The fact that you can add a large platter for a small NAS solution is just a nice option.

I'd far rather see a 2x PCIe port that could be used for whatever you wanted.

Re:BeagleV – An affordable RISC-V computer designed to run L... by tachyonbeam on Wednesday January 13, 2021 @10:15AM (#25762955)
I think it's just that most people want to use the Raspberry Pi for toy projects. They're trying to keep the cost down, and to keep the board small. If you want something like micro ATX ARM motherboard, that's a different use case. The large majority of Raspberry Pi users are fine with USB 3.0 ports for I/O.
Re:BeagleV – An affordable RISC-V computer designed to run L... by tjoff on Wednesday January 13, 2021 @11:49AM (#25764584)
Most that are complaining about this just want something reliable.

Raspberry pis are very popular as audio streamers, media centers that streams of the network, home automations etc.

But all or them greatly suffer from the fact that it can randomly die on you. Which is quite frustrating.

The only sensible solution (imho) to this currently is netbooting but it can be a hassle to setup in some cases.

An integrated 16GB emmc would do wonders for everything mentioned above.

Re:BeagleV – An affordable RISC-V computer designed to run L... by bsder on Wednesday January 13, 2021 @12:21PM (#25765115)
We have an alternative to the RPi that has an eMMC. It's called a Beaglebone.

And everybody bitches that the board is too expensive.

Re:BeagleV – An affordable RISC-V computer designed to run L... by hajile on Wednesday January 13, 2021 @12:41PM (#25765389)
A PI4 compute unit with 8GB of RAM instead of 1GB (faster, DDR4 instead of DDR3 too) and 32GB eMMC and a quad-core 64-bit CPU with much higher IPC while only costing $90 which is around $50 cheaper than a BeagleBoard AI (the same comparison exists for the Black too). You also get direct PCIe access to do what you want.

Beagle just doesn't offer anywhere near the same value.

Re:BeagleV – An affordable RISC-V computer designed to run L... by bsder on Wednesday January 13, 2021 @01:06PM (#25765746)
The Black compared with the older RPi3. And everybody was always "The RPi3 is cheaper".

The conversations always went like this:

"Cheaper? So, did you count the SD card you need for the RPi?"

"But it's cheaper."

"And the special power supply because the RPi power systems suck?"

"But it's cheaper."

"And the keyboard and monitor because it doesn't run headless over USB?"

"But it's cheaper."

"... Okay, boss, it's cheaper. Go have fun."

And that's before we even start talking about the lousy documentation of the RPi CPU chips. And the fact that the Ethernet was installed over the USB. etc.

But the RPi was cheaper. Shrug. The guys at TI learned their lesson. Throw everything off the board and make it cheap--the hackers don't give a shit about anything else.

Re:BeagleV – An affordable RISC-V computer designed to run L... by greyhair on Wednesday January 13, 2021 @03:59PM (#25767887)
Two different targets, I have used both. I have so many 5V power supplies sitting around, they git in the way. Including 12v/5v buck converters for auto stuff. You can configure for headless when you set up the SD card before you ever boot. I have never booted a Pi with attached display/keyboard.

The Pi is cheap, for a reason, but it is still more powerful than anything I use it for. But the same goes for the Beagle Board.

Choose the board you want, for the project you are doing.

Note: For every RPi project I have done, I have done two or three ESP8266/ESP32 projects along with five or six AVR/M0/M2 Arduino projects.

Re:BeagleV – An affordable RISC-V computer designed to run L... by imtringued on Thursday January 14, 2021 @10:25AM (#25777405)
I'm always irritated by people calling it a $35 computer when you can get complete systems for just a little more.
Re:BeagleV – An affordable RISC-V computer designed to run L... by tjoff on Wednesday January 13, 2021 @01:51PM (#25766362)
It doesn't have the same ecosystem. Which is half the point of the rpi to start with.

But if you vouch for it I'll take a closer look.

Re:BeagleV – An affordable RISC-V computer designed to run L... by bsder on Wednesday January 13, 2021 @02:14PM (#25766666)
> It doesn't have the same ecosystem. Which is half the point of the rpi to start with.

Now that's a valid argument. And I would argue it's way more than half.

If you want a one-off mumblesomething and can stay at the Linux OS level (ie. Web application, USB peripherals or maybe the most basic of GPIOs), the RPi ecosystem is going to let you get there much faster even though it will crash and burn occasionally. If that's "good enough" ... Douzou! ... Ganbatte! ... get moving and get going.

I have the same comment about Arduino. It ain't real reliable (but, to be fair, it's quite a bit more reliable than the RPis), but the ecosystem is awesome.

However, when you start asking something like "Gee, how do I send a single address byte over the I2C subsystem?" or "That signal needs a response in 50 nanoseconds, can I make that work?" you will thank the TI folks for producing that 5000 page (not joking or exaggerating) Technical Reference Manual.

One other thing that people who live in the RPi system always overlook in the Beagle ecosystem are the PRU cores. You can do HARD real-time work on those and still live in the Linux world. That's something that the RPi series just simply cannot do no matter how much you hack at them. And it often means the difference between a design which needs an FPGA and one that doesn't.

However, yes, you are going to live in that Technical Reference Manual for the Beagle series. If you're not comfortable doing that, then the Beagle stuff probably isn't for you.

There are really good reasons to use and love RPi's--ease of use is huge. But the whole "It's cheaper" thing just chaps my hide.

Re:BeagleV – An affordable RISC-V computer designed to run L... by tjoff on Wednesday January 13, 2021 @03:37PM (#25767629)
I'll take your word for it, but it sounds like a very different use-case than most use the pis for though.

When you spend that much time with your device cost isn't a factor (imho). But the pi is cheap enough that I can gift one if I know the end result will work well. And it is quite nice to just have one lying around for when you get an itch.

Using netboot I have never had an issue with the pi. All reliability problems I've experienced can be tracked down bad power and SD-cards (note: I have not used any IO other than USB). Both are annoying enough to look for alternatives but both are also fixable (netbooting likely disqualifies it for many usecases though).

Minimizing reads on the sd card usually means that they work at least several years untouched (in my experience, obviously limited sample size), which is likely good enough for many (a true read-only system might work even better). But when the audio streamer in the vacation cabin dies when you aren't around to fix it is still frustrating. So I'm in the moment of figuring out how to move the last of them to be netbooted. Which has some very nice side-effects as well, such as trivial remote system backup+restores.

It also comes down to time. I know the pi and the pitfalls. Researching an alternative would take many hours and I'd still have to experience some of them. If the goal of the project isn't to learn a new sbc then that alone is a dealbreaker.

That said, PocketBeagle seems to support wifi netboot (which neither the pi and pi zero w do). Might be able to find a project for that!

Re:BeagleV – An affordable RISC-V computer designed to run L... by mrweasel on Wednesday January 13, 2021 @10:14AM (#25762941)
I would love to see a Micro-ATX og Mini-ITX board with an ARM or RISC-V CPU, with PCIe ports and storage connectors. There are ARM boards, but they're a little pricy.
Re:BeagleV – An affordable RISC-V computer designed to run L... by brucehoult on Wednesday January 13, 2021 @10:28AM (#25763136)
https://www.crowdsupply.com/sifive/hifive-unmatched

PCIe, 16 GB DDR4, two M.2 (one for storage, one WIFI), quad core 1.5 GHz (same cores as this board, but twice as many)

Re:BeagleV – An affordable RISC-V computer designed to run L... by unwind on Wednesday January 13, 2021 @12:32PM (#25765283)
At $679, that's more than "a little pricey" to me at least.
Re:BeagleV – An affordable RISC-V computer designed to run L... by brucehoult on Wednesday January 13, 2021 @06:10PM (#25769296)
Existing and shipping at all is the first step. Low price comes later, with volume.
Re:BeagleV – An affordable RISC-V computer designed to run L... by unwind on Wednesday January 13, 2021 @07:02PM (#25769814)
That makes sense and sounds logical, but (and I'm certainly no historian) didn't the Raspberry Pi debut at a low price?
Re:BeagleV – An affordable RISC-V computer designed to run L... by imtringued on Thursday January 14, 2021 @10:29AM (#25777460)
The original Raspberry Pi was based on surplus stock of Broadcom's SoCs. It was a set top box chip that was produced in high volume.
Re:BeagleV – An affordable RISC-V computer designed to run L... by vhodges on Wednesday January 13, 2021 @01:09PM (#25765809)
https://turingpi.com/v2/ is coming (soon?!?). Uses 1-4 Pi compute modules.
Re:BeagleV – An affordable RISC-V computer designed to run L... by MisterTea on Wednesday January 13, 2021 @10:07AM (#25762831)
SD cards are too slow to be of practical use as a general purpose disk. They're fine when you have a very predictable workload that does not involve a lot of disk IO.
Re:BeagleV – An affordable RISC-V computer designed to run L... by mrweasel on Wednesday January 13, 2021 @10:11AM (#25762892)
The SD card on the Raspberry Pi is 50 MBps max, if I recall. That's a little slow if you want to use it as a small desktop.

I don't want to lug around anything, I want it to sit behind my monitor. Also an M.2 drive isn't that big, it could fit in many existing cases.

Re:BeagleV – An affordable RISC-V computer designed to run L... by btreecat on Wednesday January 13, 2021 @10:08AM (#25762850)
How about _reliable_ storage needs?
Re:BeagleV – An affordable RISC-V computer designed to run L... by numpad0 on Wednesday January 13, 2021 @10:23AM (#25763073)
SD in itself isn't technically unreliable. Lots of smartphones do just fine with eMMC, which is same thing as microSD card except in nonstandard IC chip form thus can't carry SD branding.
Re:BeagleV – An affordable RISC-V computer designed to run L... by monocasa on Wednesday January 13, 2021 @11:50AM (#25764594)
Practically they end up being really different. SD Cards end up being bottom of the barrel flash chips (even from the 'good' brands), whereas eMMC uses flash good enough that you can count on it being non replaceable.

You want "industrial" cards from a vendor tailored to the space. I wouldn't trust even those new industrial sandisk cards.

Re:BeagleV – An affordable RISC-V computer designed to run L... by jschwartzi on Wednesday January 13, 2021 @02:15PM (#25766678)
Yeah as someone who has deployed SD-based and eMMC-based systems in industrial spaces, SD cards are hot garbage compared to eMMC and I would strongly recommend not using them in anything that needs to be reliable.
Re:BeagleV – An affordable RISC-V computer designed to run L... by jandrese on Wednesday January 13, 2021 @05:47PM (#25769055)
There should be a market for people who will pay extra for SD cards that:

1. Absolutely don't lie about their capacity

2. Have a reasonable MTBF

3. Are reliably fast

But instead we're all dealing with an industry that raced to the bottom years ago.

I'm concerned that the same mentality will infect the eMMC market eventually and it will become impossible to find quality parts after a couple of years.

Re:BeagleV – An affordable RISC-V computer designed to run L... by monocasa on Wednesday January 13, 2021 @06:50PM (#25769682)
What you're asking for does exist in the industrial market (and I'm skeptical of those 'industrial' branded sandisk cards). They still use pseudo SLC (storing one bit in every flash cell as 00(0) or 11(1) and correcting up or down on read back). They also will work with you so you can track BOM changes as they internally change the cards so you can track failure rates. They also give you access to tons of internal perf counters so you can do preventative maintenance (ie. swap the card if it's getting long in the tooth). They also just generally treat you as a business partner rather than a consumer, wrt support and what have you.

It costs a pretty penny though. $40 for a 2GB non micro card was the last quote I got.

Re:BeagleV – An affordable RISC-V computer designed to run L... by jandrese on Wednesday January 13, 2021 @11:25PM (#25771992)
Worth it if you're installing something like a Raspberry Pi in a ceiling mount screen that's a pain to access.
Re:BeagleV – An affordable RISC-V computer designed to run L... by imtringued on Thursday January 14, 2021 @10:36AM (#25777572)
Technically it should be the same. In practice manufacturers make certain assumptions.

1. most SD card devices are battery powered

2. SD card failure is acceptable because they are replaceable

3. SD cards are not used as main storage for a computer

That leads to low quality SD cards.

Re:BeagleV – An affordable RISC-V computer designed to run L... by jwandborg on Wednesday January 13, 2021 @10:08AM (#25762857)
An M.2 SSD is not huge. In my experience, SD cards are way slower than SSDs for random access operations.
Re:BeagleV – An affordable RISC-V computer designed to run L... by stjohnswarts on Wednesday January 13, 2021 @12:17PM (#25765050)
compiling on SSD is so slow. I once compiled an rpi kernel on rpi just for fun and it took forever. Cross compiling is the only way to go for now, unless you only have a small project.
Re:BeagleV – An affordable RISC-V computer designed to run L... by jandrese on Wednesday January 13, 2021 @05:48PM (#25769073)
Raspberry Pis tend to be skimpy on memory. If it starts swapping it's going to be slow even on a fast SSD.
Re:BeagleV – An affordable RISC-V computer designed to run L... by jug on Wednesday January 13, 2021 @10:52AM (#25763525)
Cheap, slow (as an operating system medium at least), and unreliable. They're the modern day floppy disk. The one upside is that the space is cheap and quite plentiful.
Re:BeagleV – An affordable RISC-V computer designed to run L... by adamc on Wednesday January 13, 2021 @11:55AM (#25764688)
SD cards are kind of slow, though.