Nice job, whoever built this :)
oh boy. that's actually the mode that keep novices clueless about what's going on with the settings.
> No auto ISO mode, No ISO-priority mode, etc. etc.
well, ISO + TIME + APERTURE are ingredients of EXPOSURE, and that should be all you need to know to start shooting. you know this and you can grab the newest high-end dslr or your grandpa's 35mm oldie and know what you're doing. the rest is just geekery.
That's hardly the fault of the mode itself — it's just a large number of SLR-buying consumers probably didn't need the complexity (or heft) of an SLR, but have the misconception that an SLR will outperform a compact or bridge camera 100% of the time. And so they buy one.
The issue there is that a lot of these people are coming from mid-range compacts a couple of years old, and see the SLR as the next logical step. A high-end compact (S95, LX5, XZ-1) or a good bridge/micro four-thirds camera (GF1/2, E-PL2, GH2) would be a far more practical solution, and nigh-indistiguishable until ISO1600 anyway.
As a side-note, I went from shooting portraits w/ a 5D2 + primes to a GF1 + 20mm f1.7, since I no longer had the time to keep the portrait gig up as a consultant. My GF1 is no full-frame SLR, but it's very close to the entry-level SLR's and in a much smaller package (with better glass to boot).
Of course. Criticizing it for not having Program mode stuck me as similar to saying "Nice sportscar, if only it had Automatic transmission". People buy high end DSLRs and don't take the time to learn what the various A-S-M-P modes do. It is the fault of the mode and the manufacturers who put P or Green modes on the SLRs, and recommend them as idiot proof modes.
Yet, I still try to remember to leave the camera in P when I put it away and often shoot in P. It's a relatively idiot proof mode; it's unlikely that, if I just pick up the camera and shoot because I'm in a hurry for whatever's in front of me, P will give me a ridiculous, unusable exposure.
Perhaps I misunderstood your point but that doesn't sound right. Iso does not control exposure: in case of film it is the sensitivity of a particular stock, and in case of sensors it's basically analog gain. Since to use a different ISO in a film camera you'd need to use a different roll or sheet of film, you can't vary ISO on a "grandpa's camera" very easily unlike with a digital camera.
The worst a newbie can do is to focus on learning 'camera modes' instead of learning how photography works - that's why all those "P", auto-iso, etc would be pointless when you want to learn (and that's what this simulator is for).
> well, ISO + TIME + APERTURE are ingredients of EXPOSURE, and that should be all you need to know to start shooting
So depth of field and the way metering actually works aren't important?
> So depth of field and the way metering actually works aren't important?
Well, we can say "everything is important" and there's no sense to number this stuff to infinity. But if you insist: metering is also just a tool, which you can live without (using exposure value tables), knowing how exposure works is the core of photography.
i should update lensdb.
Not saying it's a comparable lens, just saying that the simulator isn't necessarily talking about a cost prohibitive situation.
Which one are you talking about? The Canon?
It would be nice if it showed non-Canon terminology (Canons say "Tv" while almost all other cameras say "S", for example), at least as an alternative. It should also visually indicate the value being automatically chosen in the different modes.
No P (program) mode. This is actually the most useful shooting mode on many DSLRs, especially for novices. It lets you trade off aperture vs. shutter speed.
__Advanced Nitpicking__
No auto ISO mode. (Great feature of Pentax cameras -- it's like M but the camera picks the ISO that will work.)
No ISO-priority mode.
It doesn't allow for things like camera shake and the child's motion (you might pick 1/60 of a second to capture the child sharply, while needing 1/250, say, for the pinwheel).
It's not worth allowing ridiculously high (small) apertures (e.g. f29) -- if you're not going to do diffraction, so I'd stop at f22. It would be nice to have faster (bigger) apertures than f2.8 to really show the benefits.
It shows autofocus points, but they don't do anything. It would be interesting to allow the user to pick a focus point and assume the metering is weighted on that position, but that's getting pretty advanced.