For a whole bathroom, it would be quite expensive; you'd need a fully watertight room (most bathrooms, even wetrooms, are not) and you'd risk contamination. Would also be difficult to retrofit unless you had a wetroom already. Also the failure modes are quite bad; what happens when the drains clog? You'd need the whole thing sunken to prevent water egress to the rest of the house.
Definitely not saying it's impossible, or even impractical, but it wouldn't be cheap.
I'm thinking these things would be designed for new-builds rather than retrofitted. Recess the floor an inch. Sealed door. Pressure sprays angling down that hit the wall up to a height of around 6-7' or so. Doesn't need to be fully watertight. Run an exhaust fan during and/or after. Maybe have a linear grate/drain at the shower end, and an air spray to help push water as well as dry the tiles.
Seal or hide power points. Cabinets would need a loose seal (they're sprayed, not submerged).
I'm guessing no one in your household has long hair. my hair will clog any shower without a decent drain grate in a week or two.
I don't think the sprays required to keep tiles clean would be enough water to flood an inch-deep recessed floor.
The maid cleans the bathroom anyhow.
It's 2020 and whether it's you or a maid, humans are still scrubbing toilets.
Why can't I just turn a hose on in the bathroom to clean everything? Argh!
Would teach component (bath/toilet etc) have an enclosure, or the whole bathroom? How much hot water would you need for that? What liability would there be for being inside when it went off?
Probably a tile-crawling robot would be a better bet.
Powerpoints would need to be sealed. Room would need to be slightly recessed (inch maybe). Cabinets would need some sort of seal.
Or it could just do the shower, which is generally already recessed, has no powerpoints/cabinets/towels. In my bathroom, that would leave the toilet (its own beast), floors (easy to do), basins (bit annoying around the taps) and benchtops (easy).
If a shower had a powered, pressure nozzle, it would probably be easy enough to do yourself once a week while in there.
The toilet is the thing to solve though. My kids are old enough to leave streaks but not old enough to reliably clean them without touching everything they shouldn't!
A bathroom that could be sealed and cleaned as though it was a dishwasher would be great. For everything but the toilet, lightly pressured spray of hot water would probably be sufficient. Throw the towels in the wash, close the waterproofed door, press the cleaning button and head off to work. Then the door/vents open to air it out after the cleaning process. There are public toilets that do it so surely we could make an attractive home version of that?
And if not the entire bathroom, at least have self-cleaning toilets rather than almost every single model being a slightly different shape so there's no standardised solution better than a toilet brush.
The lifetime cost of paid cleaners or just cleaning the bathroom yourself has to be worth something that could be invested into a bathroom upgrade when building.