News for hackers. Stuff that matters.
Re:To the future occupants of my office at the MIT Media Lab by PragmaticPulp on Saturday August 15, 2020 @08:38PM (#24173748)
Very true.

Having worked in this space, the failures usually come from lopsided teams. Too many startups try to treat these products as technology products with a side of building materials, assuming that the technology is the hardest part.

In reality, the technology part is easy. The most difficult part is manufacturing and shipping reliable mechanisms at low cost. It can be done, but the mechanisms and mechanical parts need to be treated as the primary product, not an afterthought.

Re:To the future occupants of my office at the MIT Media Lab by Retric on Saturday August 15, 2020 @09:09PM (#24173911)
Just as important is people are generally quite capable, so stuff people find annoying tends to be genuinely difficult.

A mass market automated pill dispenser you can just dump your prescriptions in seems like an obviously viable product. But, building something that’s easy enough to use, reliable enough to be safe, and cheap enough to be affordable is a pipe dream.

Re:To the future occupants of my office at the MIT Media Lab by ghaff on Saturday August 15, 2020 @10:34PM (#24174393)
Turning on a set of lights is not actually very high on the list of annoyances for most people. Putting dishes in the dishwasher and then putting them away, ditto for clothes, wiping down the kitchen counters and cleaning the floor much more so. Dealing with various yard work a bigger PITA still. Guess which one consumer IoT can actually somewhat address.
Re:To the future occupants of my office at the MIT Media Lab by tomatotomato37 on Saturday August 15, 2020 @10:32PM (#24174383)
You know I'll be actually surprised if that isn't a product, because that seems "As seen on TV" level amount of effort. Have some hopper with 7 compartments, put a disk with a hole underneath it, and hook it to some 3 cent digital clock module such that spins it around 50 degrees or so everytime it rolls over. Build the whole thing out of plastic, throw it at some factory in China, and before you know it you'll be selling in every walmart in middle America.
Re:To the future occupants of my office at the MIT Media Lab by Retric on Saturday August 15, 2020 @11:44PM (#24174848)
Plenty of devices have little bins you fill, some then automatically open those bins on the correct days.

However, pills are of wildly different shapes and sizes, which invalidates most of the seemingly obvious sorting solutions. Prescriptions can also call for multiple pills in the same day.

Re:To the future occupants of my office at the MIT Media Lab by tfigment on Sunday August 16, 2020 @01:00AM (#24175289)
Very much this. Last time my dad visited he had 4 pill boxes: 7am,10am,2pm,6pm. We had to color code so he knew which ones at which hour. They had to be portable, at least 10 and 2 did. He had slight dementia so he would get confused about colors and sometimes the day. Even worse was trying to decipher the instructions for each medicine to refill the boxes especially after some would change doses after initial couple of weeks. Really hard to automate that correctly even if you had a sorting machine.
Re:To the future occupants of my office at the MIT Media Lab by mjevans on Sunday August 16, 2020 @03:45AM (#24176032)
It's really sad, but the automation for this is a pharmacy that creates custom plastic sealed single-dosing packets. Some people, most older people, are on THAT many meds and just need to take the next one off the roll.
Re:To the future occupants of my office at the MIT Media Lab by Broken_Hippo on Sunday August 16, 2020 @06:19AM (#24176647)
I've seen this for a nursing home in Norway. I'm not sure if folks get this at home or not. I'd guess that some that get a home nurse at least once a day gets them. And honestly, they would usually seem to be a good solution.

I think the main weakness is that for a few folks, medicine changes would be difficult because they often are mid-week or mid-month and for some, they would really need their medicines re-packaged. I'm not sure this is as big of a problem in nursing homes and whatnot because the nurse is dispensing the meds, while some folks at home have bad memories or the beginnings of undiagnosed dementia and just won't remember.

Re:To the future occupants of my office at the MIT Media Lab by Simon_says on Sunday August 16, 2020 @10:39AM (#24178185)
That's what all pharmacies in South Korea do.
Re:To the future occupants of my office at the MIT Media Lab by WWWWH on Sunday August 16, 2020 @01:55AM (#24175568)
This and how stable are the active ingredients to oxygen? Are they stored under inert gas in the blister pack?
Re:To the future occupants of my office at the MIT Media Lab by taneq on Sunday August 16, 2020 @05:40AM (#24176469)
Sounds great until someone loads it wrong it doesn’t set the date correctly or something, gets the wrong dosage, and dies. The risk seems too high for the potential reward.
Re:To the future occupants of my office at the MIT Media Lab by distances on Sunday August 16, 2020 @06:37AM (#24176726)
I'm no market expert, but wouldn't a pill dispenser be a very niche product? Most people aren't on any medication and thus won't need one, at least until reaching old age.

Though the number of old folks is getting larger, so maybe that's a market by itself.

Re:To the future occupants of my office at the MIT Media Lab by disgruntledphd2 on Sunday August 16, 2020 @08:40AM (#24177276)
Basically every person over 70 takes some pills in the West.

I know for a fact that my parents and my wife's parents would all love this.

My mother was a nurse, so she handles it better than most, but she still spends an hour a week on it.

Re:To the future occupants of my office at the MIT Media Lab by ljm on Sunday August 16, 2020 @06:02AM (#24176563)
Reminds me of the Juicero, which took a fairly basic concept (validating a QR code and squeezing a packet of mushed up fruit pulp so juice would come out) and still comically failed because, even with all their meticulously machined gears and cogs, it did a much inferior job to a human hand and a few conveniently shaped kitchen utensils.

Never mind that an internet connected, custom-engineered juice press was a bad idea in the first place. It was still out-manufactured by simple tools like a garlic press, or a little metal thing you twist your fruit on top of. Or a blender.

Re:To the future occupants of my office at the MIT Media Lab by nogabebop23 on Saturday August 15, 2020 @10:14PM (#24174275)
it's kind of interesting that places like University research groups (including MIT in the early days of computing in the 50's/60's) recognized this need and had dedicated machinists to build a lot of the mech that they needed. If you've ever watched a talented smith work a lathe - wow, they are the true wizards!
Re:To the future occupants of my office at the MIT Media Lab by eru on Sunday August 16, 2020 @07:09AM (#24176838)
These days you can scratch that itch on youtube.
Re:To the future occupants of my office at the MIT Media Lab by raverbashing on Saturday August 15, 2020 @09:15PM (#24173950)
Also see: every "smart lock" startup around.
Re:To the future occupants of my office at the MIT Media Lab by dsr_ on Saturday August 15, 2020 @10:34PM (#24174395)
I have a great smart lock. The secret is, it's dumb. It has a keypad and a keyhole and a 9V battery that lasts about five years. About three months before the battery wears out, it starts beeping and blinking every time you open it, so you know it's time to replace the battery.

You have to look in the manual to add or remove a code, but it remembers at least a dozen codes. It doesn't talk to a smartphone. It doesn't have a network connection. It doesn't store a log of openings, and it doesn't violate your privacy.

What it does is solve the two biggest problems with door locks: not having your key, and getting a key to a friend so that they can get into your house.

Re:To the future occupants of my office at the MIT Media Lab by bigiain on Sunday August 16, 2020 @12:40AM (#24175180)
That sounds like it’s solved half the problem, at least it’s not another outdated Linux 2.7 machine with a nodejs app with no rate limiting listening to unencrypted http sessions over WAP “secured” wifi.

But I wonder how it’d fare if someone like the lockpicking lawyer reviewed it’s mechanical lock design? Is it actually a good lock?

Re:To the future occupants of my office at the MIT Media Lab by Broken_Hippo on Sunday August 16, 2020 @06:25AM (#24176677)
Is it actually a good lock?"

I'm not convinced it matters as long as it seems, to the layperson, to be a lock of average quality. No one really wants a lock to feel insecure if it is held in the hand, for example. And sure, if tests say you can just hit it and open it, you'll pass. But as long as it doesn't have obvious defaults... It is good.

Most locks really just keep out crimes of opportunity. Few folks have locks that will keep out folks that would destroy your front door or break your windows and few are real challenges to lockpicks. And the shouldn't be challenges to lockpicks! Otherwise, how would a locksmith do their work? It doesn't matter, though. Most folks simply aren't lockpicks - and a good number of folks that can* pick locks well do not have desires to break into homes.

Re:To the future occupants of my office at the MIT Media Lab by montereynack on Sunday August 16, 2020 @03:03AM (#24175852)
Which lock is it that you’re using? I’m kind of in the market atm.