News for hackers. Stuff that matters.
Re:A look at the die of the 8086 processor by kens on Wednesday June 17, 2020 @01:53PM (#23554450)
I've ordered an 8088 so I can compare the internal circuitry of the chips. They should be mostly the same, except that the 8088 has an 8-bit data bus externally and has 4 bytes of prefetch buffer instead of 6.
Re:A look at the die of the 8086 processor by kiwidrew on Wednesday June 17, 2020 @10:12PM (#23559100)
That's fantastic news! I'm interested to see whether the 8086 and 8088 use the same microcode or whether the only difference between the chips is in the BIU itself.

I've always wanted a "visual 6502" style emulation of the original IBM PC, and a high-resolution die photo is the first step. Cycle-accurate emulation of the 8088 is fiendishly difficult thanks to the complex interactions between the EU and BIU.

Re:A look at the die of the 8086 processor by Taniwha on Wednesday June 17, 2020 @04:58PM (#23556671)
remember that the address and data pins are multiplexed - the 8088 and 8086 have the same number of pins

My guess is that the prefetch buffer is always 6 bytes but the 8088 fetches instructions more slowly and never fills it past 4 instructions

I think they're probably the same die, the thing to look for is whether there's a bonding difference

Re:A look at the die of the 8086 processor by robocat on Wednesday June 17, 2020 @07:30PM (#23558084)
> I think they're probably the same die

Very unlikely. The 8088 was developed after the 8086, and there are more pin differences including m/io inverting to io/m.

Re:A look at the die of the 8086 processor by mrlonglong on Wednesday June 17, 2020 @08:03PM (#23558312)
Now I really want to get a 8086 on a bread board and see if I can do things with it! What else do I need to put on the breadboard to build a minimum computer?
Re:A look at the die of the 8086 processor by mlaux on Thursday June 18, 2020 @01:57AM (#23560191)
Probably just a voltage regulator, a clock source, reset pin logic, a couple ROM chips (2 8-bit wide chips or 1 16-bit wide), some static RAM, a PAL/GAL/74xx logic for address decoding and chip select pins, stuff to deal with the multiplexing, and whatever input/output you want (bus buffers for parallel I/O, off the shelf UART chips, etc)

I’ve only done it with the 6502 and Z80, but the 8086 shouldn’t be too much harder. There are plenty of resources available online for those two chips that you could adapt!

Re:A look at the die of the 8086 processor by rasz on Thursday June 18, 2020 @05:17AM (#23561308)
Re:A look at the die of the 8086 processor by kevin_thibedeau on Thursday June 18, 2020 @01:10PM (#23565195)
In minimum mode you don't need more than a ROM, SRAM, and clock source.
Re:A look at the die of the 8086 processor by mobilio on Wednesday June 17, 2020 @03:47PM (#23555859)
Yes, i know.

Will wait for this article!