News for hackers. Stuff that matters.
Re:A look at the die of the 8086 processor by robocat on Wednesday June 17, 2020 @07:30PM (#23558084)
> I think they're probably the same die

Very unlikely. The 8088 was developed after the 8086, and there are more pin differences including m/io inverting to io/m.

Re:A look at the die of the 8086 processor by mrlonglong on Wednesday June 17, 2020 @08:03PM (#23558312)
Now I really want to get a 8086 on a bread board and see if I can do things with it! What else do I need to put on the breadboard to build a minimum computer?
Re:A look at the die of the 8086 processor by mlaux on Thursday June 18, 2020 @01:57AM (#23560191)
Probably just a voltage regulator, a clock source, reset pin logic, a couple ROM chips (2 8-bit wide chips or 1 16-bit wide), some static RAM, a PAL/GAL/74xx logic for address decoding and chip select pins, stuff to deal with the multiplexing, and whatever input/output you want (bus buffers for parallel I/O, off the shelf UART chips, etc)

I’ve only done it with the 6502 and Z80, but the 8086 shouldn’t be too much harder. There are plenty of resources available online for those two chips that you could adapt!

Re:A look at the die of the 8086 processor by rasz on Thursday June 18, 2020 @05:17AM (#23561308)
Re:A look at the die of the 8086 processor by kevin_thibedeau on Thursday June 18, 2020 @01:10PM (#23565195)
In minimum mode you don't need more than a ROM, SRAM, and clock source.