So about 0.001-0.002% as efficient as solar, up to 5 orders of magnitude worse. With the advantage of less intermittency, I suppose, but both are solid state energy converters; I wouldn’t claim thermoelectric is “lower tech” except that it’s way less efficient and with more environmental footprint due to that inefficiency. A battery to solve the intermittency would be still a much better trade IMHO.
I’m not saying that biology isn’t great. Self-replicating machinery is pretty awesome. But if you’re using advanced machines anyway, you should skip the biological middleman if you can and go right for the source of energy.
What might be better is something more like a steam engine, except without the complicated maintenance and operation requirements and the annoying tendency to explode if not carefully maintained. Sadly no-one seems to have been able to design such a device.
Why not a Stirling engine?
It looks like the Kickstarter turned into https://seftonmotors.com/ , which are about 2000$ for a 1.2kW (full temp, pressurized) engine.
I'm not sure though why you want to burn wood on that scale. It's really expensive to properly filter the exhaust from a wood stove, and economy of scale doesn't hit in the kW range. I mean, yes, if you're in the middle of nowhere, sure, but I'd claim that an install cost of 3~4$/W(electric) for the Melvin Package, including shipping (even to a potentially-remote location, only 100kg for the largest piece allows transport with e.g. a paramotor or two humans, with additional trips for the cooling jacket/firebox/vents/piping) is acceptable for a reliable wood-fueled electricity source.
It's probably not much.. but I imagine you could boost the efficiency by lining the chimney with copper tube and running water through it, using the waste heat there to heat this water. Then use your TEG as a heat-exchanger between that loop and another loop connected to your "domestic water heater" or other cold water supply.
Maybe it's merely teasing the Ig Noble Prize committee though. :-)
That's 1.68wh/kg of wood.
Pine has a stored energy of about 15 million BTU/Cord (2380 lb)[1], or 4,396Kwh / 1080 kg, or 4000 wh/kg of wood. 0.04% efficiency.
That's terrible by the standards of 19th century steam engines, let alone anything newer. It might be a way to get enough power to charge a cell phone from a stove used for other purposes. But burning wood just to make electric power this way is going to need a lot of forest for very little energy.
Note that the article has drawings, but not pictures, of a vacuum and scooter being powered with a thermoelectric unit. They probably can't do that.
Thermoelectric systems are often used to power heating controls, where little power is required. Some bigger ones can power heating fans as a backup. The U.S. Army has a portable heater with a fan powered this way.
[1] https://www.engineeringtoolbox.com/wood-combustion-heat-d_37...