Re:An engineered PET depolymerase to break down and recycle ...
by baq on Sunday May 10, 2020 @05:01PM
(#23136141)
i don't want this anywhere near my home please
[ Parent
| on HN ]
Re:An engineered PET depolymerase to break down and recycle ...
by gus_massa on Sunday May 10, 2020 @06:46PM
(#23137037)
The research article say they use the enzyme at 65°C/70°C (150°F/160°F). Also, usually the reaction speed decrease exponentially with the temperature. So your home items are probably fine.
Re:An engineered PET depolymerase to break down and recycle ...
by tandr on Monday May 11, 2020 @12:11AM
(#23138842)
Say, at 18C - does it still work? Maybe 100 times slower, but still work? Or you have to reach 65C for it to evens start working?
Re:An engineered PET depolymerase to break down and recycle ...
by anonuser123456 on Sunday May 10, 2020 @05:03PM
(#23136160)
Because?
Re:An engineered PET depolymerase to break down and recycle ...
by greglindahl on Sunday May 10, 2020 @05:04PM
(#23136173)
I have a large number of plastic things inside my home that I hope do not become decomposed.
Garbage, sure, decompose away.
Re:An engineered PET depolymerase to break down and recycle ...
by YetAnotherNick on Sunday May 10, 2020 @05:09PM
(#23136214)
It does not multiply like you expect in a movie. So the amount it can decompose is limited by quantity of the enzyme.
Re:An engineered PET depolymerase to break down and recycle ...
by the8472 on Sunday May 10, 2020 @05:14PM
(#23136260)
Enzymes are proteins. They're applied to powderized plastic in a bio-reactor. It's unlikely that they'd be able significantly attack bulk plastics before they themselves get broken down.
Re:An engineered PET depolymerase to break down and recycle ...
by lostmsu on Sunday May 10, 2020 @05:46PM
(#23136541)
Wait until some organism eats them and learns to reproduce.
Re:An engineered PET depolymerase to break down and recycle ...
by thomas on Sunday May 10, 2020 @05:04PM
(#23136172)
It’ll eat everything inside!
Re:An engineered PET depolymerase to break down and recycle ...
by phkahler on Sunday May 10, 2020 @05:04PM
(#23136171)
It might be extremely toxic.
Re:An engineered PET depolymerase to break down and recycle ...
by eloff on Sunday May 10, 2020 @05:06PM
(#23136189)
My parents have a neighbor whose house is literally made of plastic, aside from a few structural supports. You could spray this on his house and 10 hours later, goodbye house ( assuming it is PET plastic, I have no idea.)
Re:An engineered PET depolymerase to break down and recycle ...
by mattkrause on Sunday May 10, 2020 @07:55PM
(#23137439)
I suspect that your parents' neighbor would already be unhappy if someone smashed their house into micron-size particles, heated it to 155˚F and kept it there for many hours.
At that point, not having the PET broken down into monomers is a pretty lousy silver lining.
(Seriously though, it needs fairly particular conditions to work.)
Re:An engineered PET depolymerase to break down and recycle ...
by cmrx64 on Sunday May 10, 2020 @05:56PM
(#23136637)
Don't be histrionic, the PET they did this with wasn't in large chunks, it was processed into a powder (with particle sizes between 200-500 micrometers). This enzyme would be less harmful to their house than rubbing it with acetone.
Re:An engineered PET depolymerase to break down and recycle ...
by rsynnott on Monday May 11, 2020 @07:54AM
(#23141133)
If you're heating the whole house to 65 degrees, as required, that is probably the least of their worries.
And it's not like the ability to dissolve plastic is new; there are plenty of solvents which will do this for various plastics.
Re:An engineered PET depolymerase to break down and recycle ...
by ScottBurson on Sunday May 10, 2020 @05:14PM
(#23136261)
Was it 3-D printed?
I was going to say that it probably isn't PET, but a bit of Googling quickly turns up articles about people making houses out of recycled plastic. If that's what it is, it could well be PET.