For another point of reference, this study[1] says it takes 1.8 J/cm^2 to deactivate the flu virus. I'm not sure which is more hearty but from my calculations, it seems as though it's similar (about 2 J/cm^2). If that's the case then if you brought the intensity of your light up (bring the bulb much closer and possibly wrap it in material that reflects UV-C if that's even possible) then it would only take seconds to deactivate the virus.
So whichever exposure time gets you the 1.8 J/cm^2 is enough to kill the flu virus and presumably SARS-CoV-2.
https://www.amazon.co.uk/gp/product/B085HZK755/ref=ppx_yo_dt...
Could it be used in a spotlight lamp that directs all the light in one direction?
Erm, then why do they come in glass tubes like florescent lights?
https://www.amazon.com/Foldable-Travel-Household-Wardrobe-To...
In one SARS-CoV study [1] the authors have irradiated SARS-CoV with a 254 and 365 nm UVC-UVA light source that emitted 4016 μW/cm^2. They found that "exposure of virus to UVC light resulted in partial inactivation at 1 min with increasing efficiency up to 6 min (Fig. 1A), resulting in a 400-fold decrease in infectious virus."
If my math is correct, a 15 Watt UVC light bulb will provide 4.77 W/m^2 flux within the radius of 0.5 m - assuming it emits omnidirectionally. Assuming the delivered power versus inactivation efficiency relationship is linear, it would require roughly about an hour of zapping to achieve the same levels of inactivation with a 15 W lamp.
Yes, we don't know if SARS-CoV inactivation times are comparable to that of COVID-19, but it's better than nothing. I am not a biologist, and micrographs of both viruses look somewhat similar. I wonder if they are structurally similar, should we expect similar susceptibility to incoming UV photons?
[1] https://medtradex.com/assets/Uploads/Literature-UVD-Corona.p...